Presentation on theme: "Concept V2.5 Lesson 9 Objectives: After completing this lesson, the learner will be able to: –Determine which executive file is correct for a given Quantum."— Presentation transcript:
Concept V2.5 Lesson 9 Objectives: After completing this lesson, the learner will be able to: –Determine which executive file is correct for a given Quantum controller. –Using the Loader software, load the appropriate executive file to a Quantum controller.
Concept V2.5 Download Executive files to PLC - CPU: Quantum Before you download a project, make sure that the connected PLC - CPU has been loaded with the correct EXEC file
Concept V2.5 The Executive Loader
(1) In Concept Configurator, Stripped Type is shown with an ‘S’ suffix Normal Executive - 130k 140k 300k 465k 900k 2 MB 984 Logic/ State RAM 8k/32k 16k/32k 32k/64k 48k/32k 64k/64k 64k Stripped Executive (1) 120k 379k - 619k - Total Memory 256k 512k 768k 2 MB 4 MB CPU-TYPE 113 02 113 03 213 04 424 02 434 12A 534 14A Concept V2.5 PLC Configurator for Quantum: CPU - Types
Concept V2.5 SR1 Download Exec files to the Quantum CPU: Executive files located in \Concept\dat Q186V222.BINCPU 213 04/ CPU 113 0x QIECV250.BINCPU 213 04/CPU 113 0xS (Stripped, IEC Only) Q486V219.BINCPU 424 0x Q58v108D.BINCPU 434 12 / CPU 534 14 Q5RV102D.BINCPU 434 12A / CPU 534 14A