1. GRP Service Riser Systems PULTRUDED STRUCTURAL PROFILE SUPPORTS WITH GRP MOULDED ANTI SLIP GRATING FOR OPEN RISERS AND CUT OUTS FOR SERVICES

2. About the system A COMPLETELY BESPOKE SYSTEM FOR OFFERING COVERAGE FOR OPEN SERVICE RISERS THAT ARE IDEAL FOR NEW BUILD RISERS & REFURB RISERS. ALL PRODUCTS ARE CONSTRUCTED FROM FIBREGLASS (GRP) MATERIALS, THE LATEST MODERN MATERIALS WITH A LARGE NUMBER OF BENEFITS OVER TRADITIONAL MATERIALS.

3. Benefits of GRP System NON SPARKING THE GRP GRATING AND GRP STRUCTURAL SUPPORTS CAN BE CUT WITHOUT ANY HOT WORKS PERMIT REQUIRED EXCELLENT CHEMICAL AND CORROSION RESISTANCE WITHSTANDS THE MOST CORROSIVE CONDITIONS TO ENSURE SOLID STRUCTURAL INTEGRITY IN TOUGH ENVIRONMENTS UNMATCHED IMPACT RESISTANCE CAN WITHSTAND MAJOR IMPACTS WITH LITTLE STRUCTURAL DAMAGE AND NO FAILURE LIGHTWEIGHT LESS THAN ONE-HALF THE WEIGHT OF STEEL GRATING SLIP RESISTANT IMPROVES SAFETY, REDUCES SLIPS AND FALLS ELECTRICALLY AND THERMALLY NONCONDUCTIVE ELIMINATES ELECTRICAL/THERMAL HAZARDS LONG MAINTENANCE-FREE LIFE REQUIRES NO SCRAPING, SANDBLASTING OR PAINTING. CUTS LIFE CYCLE COSTS DRAMATICALLY CHOICE OF COLOURS ANY COLOURS AS AVAILABLE FIRE RETARDANT FLAME SPREAD RATING OF 25 OR LESS

4. Benefits of GRP System – In Detail NON SPARKING THE GRP GRATING AND GRP STRUCTURAL SUPPORTS CAN BE CUT WITHOUT ANY HOT WORKS PERMITS AS THEY DO NOT PROVIDE ANY SPARKS DUE TO THE FIBREGLASS MATERIALS. DURING CUTTING, NO AREAS NEED TO BE PROTECTED FROM OTHER TRADES - THIS IS DIFFERENT TO TRADITIONAL STEEL WORKS LIGHTWEIGHT NO SPECIALIST LIFTING EQUIPMENT IS REQUIRED AND MINIMAL STORAGE IS REQUIRED ON SITE - THIS IS DIFFERENT TO TRADITIONAL MATERIALS THAT REQUIRE SPECIALIST LIFTING EQUIPMENT SLIP RESISTANT AN ANTI SLIP AGGREGATE IS ADDED TO THE TOP LAYER OF THE OPEN MESH FLOORING THAT PROVIDES SLIP RESISTANCE – UNLIKE TRADITIONAL STEEL WHICH CAN BE SLIPPERY UNDERFOOT COLOUR CHOICES WHILST THERE ARE STANDARD STOCK COLOURS, ANY COLOUR GRATING CAN BE OFFERED AT NO ADDITIONAL COST OR MINIMUM QUANTITY, MEANING DIFFERENT RISER TYPES CAN BE DONE IN DIFFERENT COLOURS, FIRE – RED, MECHANICAL – BROWN ETC.– UNLIKE TRADITIONAL MATERIALS WHICH ARE OFFERED IN A SINGLE COLOUR OR IF THEY CAN BE PAINTED, IT LEADS TO REGULAR MAINTENANCE BEING REQUIRED FIRE RETARDANT AS STANDARD THE GRP GRATING AND PROFILES MEET BS476 PART 7 FOR CLASS 1 FLAME SPREAD RATING, A PHENOLIC RESIN SYSTEM CAN BE USED THAT IS AIMED AT MEETING CLASS 0 FLAME SPREAD – UNLIKE TRADITIONAL MATERIALS THE FIRE RETARDANCY OF GRP MATERIALS IS DONE DURING THE MANUFACTURING PROCESS

5. The installation process TYPICAL OPEN RISERS PRIOR TO ANY SERVICES, GRATING AND PROFILES INSTALLED

6. PULTRUDED SUPPORTS FIXED TO PERIMETER OF OPEN RISERS ATTACHED WITH CHEMICAL ANCHOR FIXINGS The installation process

7. DEPENDANT ON SPANS INVOLVED AND OR FIXING RESTRICTIONS, ADDITIONAL SUPPORTS CAN BE ADDED INCLUDING I BEAMS The installation process BB Scaffolding

8. Project Profile – South Bank Tower, Mace SIZE OF PROJECT APPROX. 700 M2 OF RISER OPENINGS COVERING APPROX. COVERING APPROX. 487 RISERS – TOTAL PROJECT VALUE: APPROX. £150K USING MATERIALS: GRP 38MM THICK OPEN MESH (32MM HOLES) STRUCTURAL GRATING 100X100X8MM PULTRUDED ANGLE, 120X70X8MM PULTRUDED I BEAM HILTI CHEMICAL ANCHORS S/S FIXING CLIP SYSTEM CORDEX PROTECTIVE SHEET

9. Project Profile – South Bank Tower, Mace PROJECT COSTINGS OVERALL APPROX. PER SQUARE METRES: 700 OVERALL COST: £150,000 COST PER M2 FOR GRP SYSTEM: £214.00 ALL IN* * COST PER M2 IS FOR THIS PROJECT AND MAY INCREASE DEPENDANT ON VARIOUS SITE SPECIFICS

10. Project Profile – South Bank Tower, Mace FUTURE PROJECT OPTIONS RESIN SYSTEM GRATING CAN BE MADE USING A PHENOLIC RESIN SYSTEM, GIVING A POTENTIAL CLASS 0 FIRE RATING, GENERALLY DOUBLE THE COST OF CLASS 1 FIRE RATING (ADDITIONAL LEAD TIME 6-8 WEEKS FROM ORDER, NO MIN ORDER QUANTITY) PULTRUDED PROFILES CAN BE MADE USING A PHENOLIC RESIN SYSTEM, GIVING A POTENTIAL CLASS 0 FIRE RATING, GENERALLY DOUBLE THE COST OF CLASS 1 FIRE RATING (ADDITIONAL LEAD TIME 6-8 WEEKS FROM ORDER AND MIN ORDER 500 LINEAR METRES) TOP SURFACE FINISH STANDARD OPEN MESH GRATING IS 25MM OR 38MM THICK WITH 32MM HOLES (68% OPEN AREA) A MINI MESH GRATING IS AVAILABLE IN THE SAME THICKNESSES BUT WITH 14MM HOLES (40% OPEN AREA). WE ALSO OFFER A COVERED GRIT TOP GRATING WHICH BONDS (DURING THE MANUFACTURING PROCESS) A 3-4MM GRITTED SHEET TO THE TOP (0% OPEN AREA)