Presentation is loading. Please wait.

Presentation is loading. Please wait.

DP511 Industrial automation Sound, vibration and power analyzers Monitoring, maintenance and diagnose.

Similar presentations


Presentation on theme: "DP511 Industrial automation Sound, vibration and power analyzers Monitoring, maintenance and diagnose."— Presentation transcript:

1 DP511 Industrial automation Sound, vibration and power analyzers Monitoring, maintenance and diagnose

2 DP511 Products

3 DSA 400/401 4 channels wireless vibration analyzer 4 IEPE inputs for accelerometers, microphones and tachometers 24 bit resolution 50 kS/s/ch sampling rate USB/ Wireless and Ethernet communication

4 DP511 DSA 500 5 channels vibration analyzer 5 IEPE or ±24V inputs for accelerometers, microphones, tachometers and process parameters 24 bit resolution 100 kS/s/ch sampling rate USB powered

5 DP511 DSA 550 5 channels absolute & relative vibration analyzer 5 configurable channels interface to any vibration sensor (acceleration, velocity, proximity), tachometer and process parameters 24 bit resolution 100 kS/s/ch sampling rate USB interface

6 DP511 VPA 316 16 channels power & vibration analyzer 8 accelerometer inputs, 2 displacement/ thermal expansion inputs 1 tachometer input 1 temperature input 2 voltage and 2 current inputs 16 bit resolution 50 kS/s/ch sampling rate USB interface

7 DP511 VPA 124 16 channels power & vibration analyzer 2 three phase/ single phase, AC/ DC power analyzers 3 accelerometer inputs 1 tachometer input 16 bit resolution 50 kS/s/ch sampling rate USB interface

8 DP511 DTS 160 16 channels testing system for electrical machines 5 voltage input 4 current transducer input 7 inputs for torque, speed and process parameters 4 digital input, 4 digital output, 2 analog output, 2 counters 16 bit resolution 50 kS/s/ch sampling rate USB interface

9 DP511 VPA 323 32 channels power and process parameters analyzer 2 three phase/ single phase, AC/ DC power analyzers 3 accelerometer inputs 1 tachometer input 16 process parameter inputs 16 bit resolution 50 kS/s/ch sampling rate USB interface

10 DP511 ROTORVIEW-400 4 channels, wireless, rotor monitoring system 4 inputs for rotor voltage, current, vibration and air gap 24 bit resolution 50 kS/s/ch sampling rate Wireless communication

11 DP511 MTS 100 MTS 300 testing stations for electrical motor Automatic testing sequence FFT analysis of power and vibration Detection of unbalancing and rotor bar, coil, commutator, air gap and bearing defects Automatic decision and recommendations Test results database

12 DP511 Real time analyzers Rugged and reconfigurable control and monitoring system More than 50 modules for different measurements 24 bit resolution 50 kS/s/ch sampling rate Ethernet communication

13 DP511 FASTVIEW® acquisition, analysis and diagnostic software Real-time acquisition and processing Continuous and long-timed signal recording Simultaneous analysis of vibration, power and process parameters High accuracy measurement and analysis Results export in Access and Excel format Monitoring and diagnosis via Internet

14 DP511 Services Vibration measurement Machines diagnosis On-site and in-situ balancing Blade testing Power analysis Training courses

15 DP511 ApplicationsApplications

16 Power turbines monitoring and diagnosis Measurement and analysis of vibration, temperature and thermal expansion High accuracy frequency spectrum, FFT filtered orbits In-situ balancing Monitored parameters trend Limit exceeding warning

17 DP511 Wind turbine diagnosis Advanced use of spectrum, cepstrum and envelope analysis Accurate diagnosis of gears, bearings and generator Blade balancing Wireless communication

18 DP511 Turbo motor testing Simultaneous analysis of vibrations and load parameters Order tracking for each rotor Automated comparing of Bode diagrams with reference diagrams or limit values

19 DP511 Rotor balancing Influence coefficients method Four runnings method Resonance speed method Static, dynamic and static-couple solution Support functions Balancing report

20 DP511 Bearing diagnosis Hilbert transform-based envelope User-defined frequency bands Envelope analysis in time, frequency and order domains Defect frequencies database

21 DP511 Power analysis Harmonic analysis of voltages, currents and power according to IEC Direct, inverse and homopolar component analysis Monitored parameters trend

22 DP511 References Almipa Alstom Ana Imep Arctic Baumit Black Sea Comoti Electroprecizia Electroputere Elcas Ploiesti Energochim General Turbo Green Energy Hidroelectrica Hidroserv Infopress Group Ohmedium Romlux Special Energo Titan UCMR UMEB UPET VGA Electronic Universitatea Politehnica Bucuresti Universitatea Eftimie Murgu Resita ICPE Bucuresti ICPE CA Bucuresti Institutul de Cercetari Mecanica Fina Institutul de Cercetari Hydro Engineering Centrul de Cercetare Optimum Adrem Invest Advanced Technologies

23 DP511 www. digitline.eu


Download ppt "DP511 Industrial automation Sound, vibration and power analyzers Monitoring, maintenance and diagnose."

Similar presentations


Ads by Google