1. ResponseCard XR Changing Channels

2. Channel 42 Receivers The ResponseCards in each classroom communicate with a receiver that is set to a specific channel. If you use the ResponseCard in more than one class, you may need to change the channel at the beginning of each class.

3. Press the MENU button until you see the main screen. Go to Main Screen

4. Use the down arrow key (Yes) to select the Change Channel Menu item. Change Channel Menu Press the Enter key to change the channel.

5. You will momentarily see the change channel screen. Changing Channel

6. The first screen reports your current channel. Your instructor will let you know what channel to use. If the current channel is correct, then press the Enter button, otherwise... Check Your Channel

7. You can now use the keypad to enter a new channel number. (Valid channel numbers are from 1-74) Enter New Channel # Press Enter to change to the new channel.

8. If the channel is correct, the ResponseCard will report that the channel has been changed and the receiver was found. Receiver Found

9. If there was a problem finding the channel, the ResponseCard will momentarily indicate that it can’t find the receiver. Receiver Not Found

10. After reporting that the card cannot find the receiver, you will be asked if you want to try another channel. Press YES to repeat the channel entry process. Try Another Channel

11. Presentation Mode After the ResponseCard has successfully found a receiver, it will enter into Presentation Mode and you can begin entering answers when polling is open.