Presentation on theme: "This is OK! The Clicker is in “Power Save” Also called “Sleep Mode”"— Presentation transcript:
This is OK! The Clicker is in “Power Save” Also called “Sleep Mode”
This will be the next screen you will see. It is asking for your Response Device ID.
Type in the ID number in the “Response Device ID:” and type it in a second time where it says: “Confirm Response Device ID:”
Once you have entered in the ID Number, click the “Submit” Button.
The status screen should state: “The Response Device ID has been successfully registered.” Click the “OK” button. This will Return you to the “Tools” screen.
1.Press MENU 2.Press YES to leave Presentation Mode 3.Press YES until you reach Change Channel 4.Press ENTER 5.Enter the Channel Number 6.Press ENTER
Press the answer you would like to submit
When you press a button to answer the question, the screen will verify that you have pressed the button NOTE: Your clicker will appear to be working even if your clicker is not registered. Don’t Forget to register your Device ID in Blackboard.