Presentation on theme: "About us Development and production of equipment and software under Parsec trade mark started in 1997 The variety of Parsec products allow to use it."— Presentation transcript:
About us Development and production of equipment and software under Parsec trade mark started in 1997 The variety of Parsec products allow to use it both for local purpose and also for hi-end integrated security solutions for large complicated objects. All Parsec products are on top level of quality and standards. There unique products of Parsec are a consequence of our permanent technological development. Our deep and advanced development leads us to success of our equipment and software on the market.
Parsec Russian development Reliability Functionality Ergonomics Basic factors of Parsec brand development
Long experience in development Progressive technologies Contemporary check-out methodologies at all stages Highly qualified staff Components from world-wide leaders Contemporary computer-aided production Cutting-edge check-out methodologies On-line consulting Warranty and post-warranty service Free training Informational and methodical support
Basic areas of business Parsec RFID Proximity Smart-cards Long-range identification ParsecNET 3 Standard Pro
Systems functional area Vehicles identification; Security systems; Logistics; Stock control; Production automation; Monitoring systems.
System basic characteristics Tag registration distance – from 5 to 100 meters Anti-collision mechanism which allows registering up to 64 tags in the reading area simultaneously Two channels for independent and joint work Unique algorithms for two-channel operation for access management systems Wiegand 26 and Parsec interfaces for access control systems, RS-485 and Ethernet for monitoring mode
PR-G07 reader and Active Tags The reader is made in IP65 case and it is suitable for outdoor installation. For connection to external devices the reader is equipped by four multicore cables passing through sealed cable glands: o Two cables for connection of portable antennas o Two are the interface to the controller and/or the PC.
PR-G07 reader and Active Tags Each reader kit includes two portable antennas connecting to the input of reader through coaxial sockets. Antennas are suitable for outdoor use. For convenience of fastening and positioning of antennas a special rotary brackets are used. Regular antennas allow to read tags on the distances from 20 to 50 meters, depending on conditions of installation. o By using of another type of antennas the distance can be increased – from 50 to 100 meters.
PR-G07 reader and Active Tags The tags are intended for identification of objects of the various physical nature and design. For more convenience of use each ActiveTag can be provided by three types of the base of the case: o For fastening on a double-sided sticky tape o For carrying on a bunch of keys built in passive identifier with working frequency 125 kHz o For fastening to object by two screws ActiveTag.I: o IP65 design o Cold-resistant lithium battery o Support negative temperatures (up to -40º C)
Applications Non-stop traffic stream registration mode: One direction Both direction Our anticollision algorithm allows the reader to identify without errors several tags simultaneously This solves the problem so called "collision" of the traditional RFID systems
Applications Standard access mode with the use of gate automation sensors and interlinked channels operation Each channel of the reader can support two sensors from an automatic gate (barrier): o A sensor to detect the car in a zone of gate (for example, an infra-red barrier) o The gate (barrier) position sensor.
User utility program Reader set includes utility program which allows: Programming reader operation mode; Determining tag handling logic; Programming tag reading distance; Diagnosing reader operation.