1. Enki has a long-lasting experience in the development of any medical
Device, although in recent years we have specialized in epiduroscopy, pain therapy and radiofrequency catheters. We have designed customized radiofrequency catheters with and without balloons, steerable video-guided catheter with balloons electrified, with 2, 3, 4 directions, discal decompressors.
Each of our catheters has been developed to satisfy a specific feature required by our customers. Therefore we feel that we are the right company which can help you design a unique device that would make the difference.
Engineering is performed with Finite Elements Analysis (FEA) and flow simulation.
For your convenience we have attached a few photos of some of our catheters parts designed from our R&D department especially for our customers. This will help you understand our capabilities.

2. Custom Moulded components
Custom Braided, Multilayer, Multilumen
and bump tubing
Custom dipping &
Blow-moulding
balloons

4. Epiduroscopy Video-guided Catheters
4 lumen catheter sheath
…Slow
Two directions
…& Fast
Two different movements
Available Diameters:
from 9.6Fr to 11.4Fr
…with double
RF electrode
Accessory with Balloon 3.6Fr…

5. Electrified 3 Fr Catheter Two directions
Cable rolled in
The handle
Retractable cable
RF steerable catheter with thermocouple

6. Epiduroscopy Video-guided Catheters
Diameters from 8.4 to 10.5Fr
2 & 4 direction!
6 lumen catheter sheath

7. RF steerable catheter with thermocouple
Light & ergonomic handle
Diameter 5.1 Fr

8. Epiduroscopy Video-guided Catheters
4 lumen catheter sheath

9. Supplied separately from the device
Discal decompressor
Cochlea 2.4 to 3Fr
Disposable motor
Supplied separately from the device

10. Electrified and non catheter with NiTi needle coming out
Diameter 3.6Fr / needle 1.5Fr
Handle engineered to allow
30 movements before it stops!

11. Fibrin submission
Mixing & spray devices

12. Discal inject-decompressor
Cochlea 3Fr

13. Irrigeasy

14. Automatic spray devices
We would like to remind you that all our products are entirely developed and manufactured inhouse, thanks to our extrusion department equipped with tri-/four layer extrusion lines, a rapid-prototyping and a moulding department for small components moulding, a balloon clean room and clean rooms for our catheters assembly. We have recently set up a compounding department to develop plastic materials in different medical grades and braided tubing have been added to our range of products.
We are confident that our know-how, experienced staff and technologies can be a valid support for your current and future project development.
If you need to contact us or to receive further information or if you wish to have a meeting with one of our R&D technicians, we will be very happy to meet you. For further information about our services, please visit our website at or contact one of our customer service agents:
Mrs. Elena Raza
Mrs. Rebecca Sciara
Best Regards Ph
Fax