1. GSM Relay Controller

2. GSM Power Supply Voltage must be between 10 – 14vdc

3. GSM Setup Jumper in Position

4. GSM Saving Numbers Using your Mobile Phone Call the GSM Device Number will be provided with Sim.

5. GSM Saving Numbers GSM Module will Hang Call up. The GSM in Setup Mode will hold your Number in Memory waiting for location storage !

6. GSM Text Number Save To Save Number Text to GSM S1 to S5 GSM has 5 number storage database. The same above to Erase except E1 – E5

7. GSM Setup Mode - Done Remove the Jumper. The GSM is now ready for use.

8. Example Application Call or Text the GSM and Open Security Gates !

9. Other Functions - CSQ Text Csq CSQ – Indicates Signal Strength in your area Anything above a value of 10 should be ok ! The second number after the, is ignored ! Please note you must have credit on your SIM for this to work !!

10. Other Functions – Respond Text Text Ron Ron – Will set your GSM to respond text example :- Relay 1 Pulsed On Please note you must have credit on your SIM for this to work !!

11. GSM Text Functions Text R1on R1on – Will pulse the relay 1 on for 1 second. Please note you must have credit on your SIM for this to work !!

12. GSM Text Pulse / Solid Text So GSM Relays will now be on Solid with a text of R1on To turn off the relay you must text R1off Please note you must have credit on your SIM for this to work !!

13. GSM Inputs x 4 Some Alarm and Fire Alarm panels have volt free relays which could be wired into the GSM Input and you receive a text if credit is on sim to let you know this has been activated !!!

14. GSM Specifications 1.GSM must have a power supply between 10 and 14vdc ! 2.GSM only uses 2G Pay as you go Sim ! 3.GSM Relays are 6 amp MAX rated Contacts 4.GSM Inputs can only take voltages from 5v to 14vdc or ac 5.GSM Enclosure IP rating IP54, Glands are IP68 6.Mounting Holes are provided with the Enclosure Please note:- We do not take any responsibility for damage connecting to 3 rd party equipment, Not conforming to the above Specifications will result in damage to the GSM Module !!