1. Single Complete Dentures

2. Maxillary Single Dentures More common More common Teeth usually lost before their mandibular antagonists Teeth usually lost before their mandibular antagonists More common More common Teeth usually lost before their mandibular antagonists Teeth usually lost before their mandibular antagonists

3. Construction of a maxillary complete denture opposing a natural mandibular dentition Life will not be so difficult as we have a much more stable base with a maxillary denture Again ensure that the opposing dentition can be made level

4. Single Dentures More difficult More difficult Tooth malpositions decrease stability (extrusion, tipping, rotation) Tooth malpositions decrease stability (extrusion, tipping, rotation) Difficulty balancing Difficulty balancing More difficult More difficult Tooth malpositions decrease stability (extrusion, tipping, rotation) Tooth malpositions decrease stability (extrusion, tipping, rotation) Difficulty balancing Difficulty balancing

5. Preparing Plane of Occlusion Individual Tooth Modifications –Sharp Unworn Cusps Reduce cuspal inclinationReduce cuspal inclination –Heavily Abraded Teeth Reduce Bu-Li widthReduce Bu-Li width

6. Construction of a mandibular complete denture opposing a natural maxillary dentition Life would be simpler if you are never confronted with this problem. Avoid creating this situation if possible If construction of this denture is unavoidable ensure that the opposing teeth are on a level plane

7. Mandibular Single Dentures Avoid when possible Avoid when possible Severe ridge resorption due to force Severe ridge resorption due to force Stress reduction should be used Stress reduction should be used –Processed resilient denture liner –Overdenture –Implant retained denture Avoid when possible Avoid when possible Severe ridge resorption due to force Severe ridge resorption due to force Stress reduction should be used Stress reduction should be used –Processed resilient denture liner –Overdenture –Implant retained denture

8. Other Strategies leave roots for over-denture support temporary soft liners replaced on a regular basis permanent soft liners

9. Single Dentures More difficult More difficult Greater force causes Greater force causes – Displacement – Fracture due to flexure – Severe residual ridge resorption More difficult More difficult Greater force causes Greater force causes – Displacement – Fracture due to flexure – Severe residual ridge resorption

14. 1)The subsequent problems with single denture against natural teeth 2)How to overcome these problems. 3) Combination syndrome and associated changes (Kelly syndrome) 4) Recording intermaxillary relations for single denture.

15. 5) Occlusion and articulation A) Tooth modification and occlusal adjustment: A) Tooth modification and occlusal adjustment: i)Swenson technique i)Swenson technique ii) Bruce technique. ii) Bruce technique. iii) Yurkstas technique. iii) Yurkstas technique. iv) Boucher technique. iv) Boucher technique. B) Common occlusal disharmonies. 5) Occlusion and articulation A) Tooth modification and occlusal adjustment: A) Tooth modification and occlusal adjustment: i)Swenson technique i)Swenson technique ii) Bruce technique. ii) Bruce technique. iii) Yurkstas technique. iii) Yurkstas technique. iv) Boucher technique. iv) Boucher technique. B) Common occlusal disharmonies.

16. 6) Methods used to achieve balance articulation I) Statically equilibrated occlusion using a programmed articulator to simulate the patient mandibular movement. a) Articulator equilibrated technique a) Articulator equilibrated technique b) Articulator generated path technique b) Articulator generated path technique 6) Methods used to achieve balance articulation I) Statically equilibrated occlusion using a programmed articulator to simulate the patient mandibular movement. a) Articulator equilibrated technique a) Articulator equilibrated technique b) Articulator generated path technique b) Articulator generated path technique

17. The subsequent problems with single denture against natural teeth 1) Firmness and rigidity in which the natural teeth retained in bone. 2) the occlusal form of the remaining natural teeth. 3) Esthetic problems due to the fixed position of the mandibular teeth. 4) The abrasion of the acrylics or natural teeth 1) Firmness and rigidity in which the natural teeth retained in bone. 2) the occlusal form of the remaining natural teeth. 3) Esthetic problems due to the fixed position of the mandibular teeth. 4) The abrasion of the acrylics or natural teeth

18. 2)How to overcome these problems. Proper diagnosis, proper denture construction procedures. Proper diagnosis, proper denture construction procedures. Dissipation of occlusal forces along the denture base. Dissipation of occlusal forces along the denture base. Appropriate preparation of the remaining natural teeth. Appropriate preparation of the remaining natural teeth. Proper diagnosis, proper denture construction procedures. Proper diagnosis, proper denture construction procedures. Dissipation of occlusal forces along the denture base. Dissipation of occlusal forces along the denture base. Appropriate preparation of the remaining natural teeth. Appropriate preparation of the remaining natural teeth.

19. 3) Combination syndrome and associated changes (Kelly syndrome) It appears during construction of mandibular distal extension partial denture against a complete maxillary denture and includes: 1) Loss of bone from the maxillary anterior edentulous ridge 2) Down growth of maxillary tubersity. 3) Papillary hyperplasia of the tissues in the hard palate. 4) Extrusion of the lower anterior teeth 5) loss of bone beneath the removable partial denture bases, It appears during construction of mandibular distal extension partial denture against a complete maxillary denture and includes: 1) Loss of bone from the maxillary anterior edentulous ridge 2) Down growth of maxillary tubersity. 3) Papillary hyperplasia of the tissues in the hard palate. 4) Extrusion of the lower anterior teeth 5) loss of bone beneath the removable partial denture bases,

22. Combination syndrome has six associated changes: 1) loss of vertical dimension of occlusion. 2) Occlusal plane discrepancy. 3) Anterior spatial resumption of the mandible. 4) Development of epulis fissuratum. 5) Poor adaptation of the prosthesis. 6) Periodontal changes. This syndrome is a result of great magnitude of force, the unsuitability of the denture foundation to resist them, and the unfavorable occlusal relationship. Combination syndrome has six associated changes: 1) loss of vertical dimension of occlusion. 2) Occlusal plane discrepancy. 3) Anterior spatial resumption of the mandible. 4) Development of epulis fissuratum. 5) Poor adaptation of the prosthesis. 6) Periodontal changes. This syndrome is a result of great magnitude of force, the unsuitability of the denture foundation to resist them, and the unfavorable occlusal relationship.

23. 4) Recording intermaxillary relations for single denture. 1)Freeing the anterior occlusion rim. 2)Using gothic arch tracer for centric relation, or using zinc oxide paste or wax for recording centric relation. 1)Freeing the anterior occlusion rim. 2)Using gothic arch tracer for centric relation, or using zinc oxide paste or wax for recording centric relation.

24. Avoid a Single Denture Against Anterior Teeth Alone Resorption Resorption Loosening Loosening Fracture Fracture Combination Syndrome Combination Syndrome Resorption Resorption Loosening Loosening Fracture Fracture Combination Syndrome Combination Syndrome

25. Single Complete Dentures –Reduce cusps in shaded area, to level plane of occlusion Mock adjustment can be performed on a diagnostic cast Severe Curve of Spee Supereruption

26. Single Complete Denture Occlusal adjustment of natural teeth Occlusal adjustment of natural teeth –Reduce severe curve of Spee level supraeruptions –Recontour rotated teeth to permit contacts on flat surfaces Occlusal adjustment of natural teeth Occlusal adjustment of natural teeth –Reduce severe curve of Spee level supraeruptions –Recontour rotated teeth to permit contacts on flat surfaces

27. Avoid a Single Denture Against Anterior Teeth Alone Fabricate a RPD for Stress Distribution Fabricate a RPD for Stress Distribution Make CD & RPD at the same time Make CD & RPD at the same time –Ensures optimal occlusion Fabricate a RPD for Stress Distribution Fabricate a RPD for Stress Distribution Make CD & RPD at the same time Make CD & RPD at the same time –Ensures optimal occlusion

28. Occlusion Rims Use to establish OVD, NOT Incisal Display Use to establish OVD, NOT Incisal Display Overbite will be incorporated when anterior teeth are set, lengthening incisal edges Overbite will be incorporated when anterior teeth are set, lengthening incisal edges Use to establish OVD, NOT Incisal Display Use to establish OVD, NOT Incisal Display Overbite will be incorporated when anterior teeth are set, lengthening incisal edges Overbite will be incorporated when anterior teeth are set, lengthening incisal edges

29. Occlusion Rims Flat Surface for Opposing Teeth Flat Surface for Opposing Teeth –No inclines –If steps in occlusal plane, provide flat areas for opposing natural teeth Flat Surface for Opposing Teeth Flat Surface for Opposing Teeth –No inclines –If steps in occlusal plane, provide flat areas for opposing natural teeth XX

30. Maxillo-Mandibular Relations Occlusion Rims on RPD framework Occlusion Rims on RPD framework Opposes CD Rims Opposes CD Rims Centric and eccentric records with Alluwax Centric and eccentric records with Alluwax Optimizes occlusion Optimizes occlusion Occlusion Rims on RPD framework Occlusion Rims on RPD framework Opposes CD Rims Opposes CD Rims Centric and eccentric records with Alluwax Centric and eccentric records with Alluwax Optimizes occlusion Optimizes occlusion

31. Maxillo-Mandibular Relations Crowns or bridges should be waxed up against the CD tooth setup Crowns or bridges should be waxed up against the CD tooth setup Optimizes occlusion Optimizes occlusion Ensures, changes can be made Ensures, changes can be made Crowns or bridges should be waxed up against the CD tooth setup Crowns or bridges should be waxed up against the CD tooth setup Optimizes occlusion Optimizes occlusion Ensures, changes can be made Ensures, changes can be made

32. Maxillo - Mandibular Relations Centric Registration Centric Registration –Extraoral hand position if opposing natural dentition (less obtrusive) Centric Registration Centric Registration –Extraoral hand position if opposing natural dentition (less obtrusive)

33. Setting Anterior Teeth More difficult More difficult –Setting for esthetics may produce excessive overbite with natural teeth –Decreases stability –Compromised position, used to balance need for esthetics & function More difficult More difficult –Setting for esthetics may produce excessive overbite with natural teeth –Decreases stability –Compromised position, used to balance need for esthetics & function

34. 5) Occlusion and articulation A) Tooth modification and occlusal adjustment: A) Tooth modification and occlusal adjustment: i) Swenson technique: Repeated diagnostic casts with modifications to the natural teeth. i) Swenson technique: Repeated diagnostic casts with modifications to the natural teeth. ii) Bruce technique: using clear acrylic resin with pressure indicating paste in the fitting surface. ii) Bruce technique: using clear acrylic resin with pressure indicating paste in the fitting surface. 5) Occlusion and articulation A) Tooth modification and occlusal adjustment: A) Tooth modification and occlusal adjustment: i) Swenson technique: Repeated diagnostic casts with modifications to the natural teeth. i) Swenson technique: Repeated diagnostic casts with modifications to the natural teeth. ii) Bruce technique: using clear acrylic resin with pressure indicating paste in the fitting surface. ii) Bruce technique: using clear acrylic resin with pressure indicating paste in the fitting surface.

35. iii) Yurkstas technique: Using a metal U shaped occlusal template that is slightly convex on the lower surface. iv) Boucher technique: iv) Boucher technique: Using porcelain teeth to grind the stone teeth. Using porcelain teeth to grind the stone teeth. Common occlusal disharmonies. iii) Yurkstas technique: Using a metal U shaped occlusal template that is slightly convex on the lower surface. iv) Boucher technique: iv) Boucher technique: Using porcelain teeth to grind the stone teeth. Using porcelain teeth to grind the stone teeth. Common occlusal disharmonies.

37. Posterior Denture Teeth Requires more adjustment to obtain stable centric contacts Requires more adjustment to obtain stable centric contacts –Denture teeth will not normally articulate well with natural dentition –Pinpoint contacts/inclines, etc. Requires more adjustment to obtain stable centric contacts Requires more adjustment to obtain stable centric contacts –Denture teeth will not normally articulate well with natural dentition –Pinpoint contacts/inclines, etc.

38. Cast Metal Denture Base Use if denture fractures repeatedly Use if denture fractures repeatedly Usual causes: Usual causes: –Heavy forces from natural teeth –Occlusal contacts on inclines –Impingement on a bony midline flexing of the dentureflexing of the denture Use if denture fractures repeatedly Use if denture fractures repeatedly Usual causes: Usual causes: –Heavy forces from natural teeth –Occlusal contacts on inclines –Impingement on a bony midline flexing of the dentureflexing of the denture

39. Denture Teeth Wear More rapid against natural teeth More rapid against natural teeth More frequent recalls More frequent recalls Adjust occlusion to prevent changes in stress distribution Adjust occlusion to prevent changes in stress distribution More rapid against natural teeth More rapid against natural teeth More frequent recalls More frequent recalls Adjust occlusion to prevent changes in stress distribution Adjust occlusion to prevent changes in stress distribution

40. Denture Teeth Wear More Rapidly Never use porcelain denture teeth Never use porcelain denture teeth –Severe attrition of natural teeth –Prefer denture teeth to wear Never use porcelain denture teeth Never use porcelain denture teeth –Severe attrition of natural teeth –Prefer denture teeth to wear

41. When the occlusal plane has been levelled, what type of occlusion will we have? this or this

42. The second choice is more likely because: natural tooth guidance would have a tendency to dislodge the denture the natural teeth are seldom situated in positions that allow the cusp to fossae, cusp to embrassure relationship

43. The Golden Rule for this type of case Equal contacts in centric occlusion and no interferences in excursive movements functional occlusion) (commonly referred to as functional occlusion)

44. An occlusal scheme that employs a multiplicity of point contacts, rather than one that utilizes broad-surfaced contacts on inclined planes is advocated. An occlusal scheme that employs a multiplicity of point contacts, rather than one that utilizes broad-surfaced contacts on inclined planes is advocated. John J. Shary

45. Centric Occlusion

46. Working

47. Protrusive

48. Premolar Occlusion

49. What about this arch opposing a single denture? We know now how to deal with this

50. With some careful grinding of the canines we can produce a bilateral balanced occlusion As a general rule, the closer the situation resembles a complete upper and lower denture set-up, the better the chance for bilateral balanced occlusion

52. If for economic reasons, periodontal concerns, sensitive teeth, etc. the patient wishes to have no mandibular tooth replacement, what then? patient education metal palate in the maxillary denture

54. typical examination questions in an organized summary, discuss the problems of the single denture wearer and possible solutions to specific problems discuss the problems faced by the patient wearing a specific type of single denture and propose strategies to cope with the problems

55. 2)How to overcome these problems. Proper diagnosis, proper denture construction procedures. Proper diagnosis, proper denture construction procedures. Dissipation of occlusal forces along the denture base. Dissipation of occlusal forces along the denture base. Appropriate preparation of the remaining natural teeth. Appropriate preparation of the remaining natural teeth. Proper diagnosis, proper denture construction procedures. Proper diagnosis, proper denture construction procedures. Dissipation of occlusal forces along the denture base. Dissipation of occlusal forces along the denture base. Appropriate preparation of the remaining natural teeth. Appropriate preparation of the remaining natural teeth.

56. iii) Yurkstas technique: Using a metal U shaped occlusal template that is slightly convex on the lower surface. iv) Boucher technique: iv) Boucher technique: Using porcelain teeth to grind the stone teeth. Using porcelain teeth to grind the stone teeth. Common occlusal disharmonies. iii) Yurkstas technique: Using a metal U shaped occlusal template that is slightly convex on the lower surface. iv) Boucher technique: iv) Boucher technique: Using porcelain teeth to grind the stone teeth. Using porcelain teeth to grind the stone teeth. Common occlusal disharmonies.

57. A level plane may be established by extraction, grinding of cusps, crowns or occlusal build-ups

58. Thank You Thank You