Presentation on theme: "Goyen Series 4 Reverse Pulse Jet Pulse Valve. OVERVIEW.... 4 Series."— Presentation transcript:
Goyen Series 4 Reverse Pulse Jet Pulse Valve
Application The extremely rapid response, and very high flow rate delivered by the 4 Series diaphragm valves makes this product especially suitable for reverse pulse jet filter cleaning. This high performance valve may be used for new dust collector builds or to replace existing ¾ and 1 valves in a dust collector refurbishment.
No more spring failures! Shockwave diaphragm Integrated spring. Proprietary engineering thermoplastic elastomer blend for consistent performance throughout the temperature and pressure range. Environmentally endurance tested at the extremes.
The coupling method of your choice The classic Goyen dresser nut coupling design. FS - Flange and Slide Seal Threaded connections. Nitrile or viton seals. Threaded Dresser nut FS Available with ¾ and 1 ports
Which repair kit? No problem! Integral kit markings The 4 Series valve is marked with the appropriate diaphragm replacement kit part number. No more searching catalogues or calling to find the right kit. Simple!
2-in-1: Integral or remote solenoid. Using the RCA3PV Series, or RCA3DM Series pilots, the 4 Series valves can be easily configured for integral piloting. RCA3PV: DIN connections, ATEX options, CE, Low Cost. RCA3DM: Goyen Q Coil voltage and connection type range with CSA* RCA3PV RCA3DM * CSA from June 15, 2012
QUALITY 4 Series
15 – 40% higher peak pressure than equivalent older 2 Series models. Consistent pulse profile, regardless of pressure. Quality starts with Design...
World class manufacturing facility, Quality Systems certified and audited to international standards for design and manufacture. Each valve fully checked for operation and sealing performance.... And then includes execution.
DIMENSIONS RCAC25 & RCAC20 MODELS 4 Series
Dimensions in mm [inches] RCAC25DD4:RCAC20DD4:
Dimensions in mm [inches] RCAC25T4:RCAC20T4: RCAC20ST4:
Dimensions in mm [inches] RCAC25FS4:RCAC20FS4:
DIMENSIONS RCA3PV & RCA3DM PILOT MODULES 4 Series
Dimensions in mm [inches] RCA3PVRCA3DM
PERFORMANCE 4 Series
Kv and Cv values
INSTALLATION REQUIREMENTS 4 Series
Operating Conditions MetricUS/Imperial Supply compressed air pressure range 0.3 to 8.6 Bar4.35 to PSI Compressed air temperature (Shockwave diaphragms) -40ºC to 82ºC-40ºF to 180ºF Compressed air temperature (Viton diaphragms) -40ºC to 232ºC-40ºF to 450ºF Media typeAir or inert gases only. Remote pilot connections Minimum pilot tube bore: 4mm (0.16) Maximum length: 2m (79)
HOW TO ORDER RCAC25 & RCAC20 MODELS 4 Series
RCAC20 __ Diaphragm type:1 – Viton 2 – Shockwave Pilot Port :0 – NPT Thread1 – Rc 2 – G Pilot Port :0 – 1/8 Size1 – 1/4 ¾ Valves The 4 means this is a fourth generation pulse jet valve. __ Inlet/Outlet style:T4 – Threaded ST4 – Stub Thread DD4 – Dresser nut FS4 – Flange in/ Slide Seal out
RCAC25 __ Diaphragm type:1 – Viton 2 – Shockwave Pilot Port :0 – NPT Thread1 – Rc 2 – G Pilot Port :0 – 1/8 Size1 – 1/4 1 Valves The 4 means this is a fourth generation pulse jet valve. __ Inlet/Outlet style:T4 – Threaded DD4 – Dresser nut FS4 – Flange in/ Slide Seal out
HOW TO ORDER PILOT MODULES 4 Series
RCA3PV integral pilot:
RCA3DM integral pilot:
RCA3DM solenoid choices:
SERVICING RCAC25DD4 Series
Repair kit details Diaphragm replacement kit numbers are marked on the diaphragm, visible before disassembly.
Shockwave assembly Viton assembly
Valve & Pilot service kit codes
APPROVALS RCAC25DD4 Series
Approvals Under the treaty of establishing the European Economic Community, the council of European Communities adopted into law a series of directives to harmonize technical standards. The 4 series valves are controlled by When used in combination with Goyen or Mecair solenoids, these valves are also controlled by The Goyen 4 Series valves and its compatible Goyen solenoid pilots comply with these directives, and bear the CE approval mark on the solenoid and/or valve cover. CouncilDirective # Machinery89/392/EEC PED97/23/EC CouncilDirective # EMC89/336/EEC Low Voltage72/23/EEC European Directive (CE)
Approvals The Goyen 4 series may be used with any of the Goyen or Mecair remote pilot enclosures. These enclosures include products with UL, CSA, and ATEX certifications to meet the applications of CSA: Class I, Group D Class II, Groups E, F, G UL: Class I, Group D Class II, Groups E, F, G ATEX: II 2 G D (Ex d IIB T3 Gb) II 2 G D (Ex d IIB T6 Gb) Please refer to the Goyen or Mecair literature for further information on these enclosures. Hazardous areas