1. ADVANCED PANELMACHINE TYPE ROLLER PRESS CLASSIC LINE THIS IS THE ORIGINAL PRESENTATION WHICH WAS HANDED OVER BY MDI TO THE BUYER OF THE PANELMACHINE IN 2006 EDITED ON 18.03.2016 PICTURES SHOW THE PRESENT CONDITION OF THE LINE !

2. CLASSIC LINE (2006)

3. DPR: Deep Roof Panel

4. DPR : Deep Profile Roof Panel

6. COIL HOLDER Coil Stand for top and bottom skin with two (2) coil holders for 5 tonne coils

7. EPS / MW LOADING SYSTEM

8. SIDE TRIM FOR EPS SHEETS TONGUE AND GROOVE INTERLOCKING PROFILE

9. EPS CORE SANDING for flattest superior panel with same thickness overall : no bumps or steps in the panel

10. EPS CORE SANDING

11. Dust extraction systems for both EPS and Mineralwool

12. MAIN LAMINATING LINE CLASSIC DESIGN fits into a 40ft container

13. INFEED ROLLERS / SHEET GUIDES Beaders for top skin to form ribs

15. CASSETTE ROLLFORMERS

16. Joints JOINT FORMERS

19. Joints GLUE DRUM STAND / CONTROLS

20. GLUEING STATION

22. glue pump system

23. SPECIAL GLUEING STATION FOR MINERAL WOOL AS CORE MATERIAL

25. DUAL HEATING BARS

26. BAND SAW CUT-OFF

27. PANEL STACKER Stacks up to 12m long panels including panel flipper for DPR panels

28. PANEL WRAPPER Usable pass : 1.500 x 1.500mm auto-pre-stretching auto-cut-off

29. CORE LOADING Sheet length measurement (exclusive to MDI) „pick and place“ instead of drop down magazine also allowing thickness change on the run and easy loading at ground level instead of at roof level Tolerance of sheets is not critical with MDI loader with upgrade : use for mineral wool conrock slab loading Can load down to 40mm thick EPS with ease Can be adjusted to load down to 300mm width if required FEATURES & ADVANTAGES

30. COMPUTER CONTROL upload and download production data to disk/file/network edit data without stoppage (important feature not available on competitor machines) Full linkup to cutting machines (panel cutting and cold wire) standard computer and setup as network, modem, internet FEATURES & ADVANTAGES

31. COMPUTER CONTROL Temperature Control and Monitoring option Glue Flow Control (exclusive to MDI) FEATURES & ADVANTAGES

32. SANDER Special diamond shape coating surface finish for best bonding to the steel Modular construction Also available as stand alone system (exclusive to MDI) FEATURES & ADVANTAGES

33. OTHER ADVANTAGES : Stand alone coil holders large main bed steel size for less deflection Pneumatic drop down roller bed Glue wipers with easy replacement system Fully Automatic Lamella Feeding System FEATURES & ADVANTAGES

34. LINE SPEED : up to 4m/min Theoretical capacity : 288 m2 per hour FEATURES & ADVANTAGES

35. PANEL LINE 2006 Deep Profile Roof and Architectural Profiles / Joints : "DPR roof rollformer(incl. 5t coil holder and add. roller bed in the laminating machine)" Trapezoidal Infill Cutter (for EPS and MW) Coil Stand for top and bottom skin with two (2) coil holders for 5 tonne coils EPS sander (top and bottom) Automatic core material loader (MW and EPS) incl end profiler for EPS Main laminating press for EPS and Mineralwool Autostart feature (included) Standard N-Lock rollformer cassette system (included) 4 dual bar heaters (included) Machine lights (included) Remote operators console (included) PLC and computer based control and batching system (multilingual interface) Glue drum stand (included) Dust extraction systems EPS and MW (Donaldson) Steel profilers (2 pairs : micro-rib and V-line) - manual actuation Remote actuation of skin profilers - (2 pairs) Safety interlock doors – Main Press (sourced locally) Docking Machine with bandsaw cutoff Panel Stacker (with turning for DPR panel ) Material INLET conveyor ( 12 meter ) Panel Wrapper Material EXIT conveyors ( 12 meter ) Plastic Protective Film Application Software / Hardware Additions Press temperature control and monitoring Panel Edge Printing

36. INCLUDED IN THE PRICE : SHELF FOR COILS FORK LIFT FOR COILS CRANE FOR 5 TONS

37. www.panelmachines.eu PRICE OF THE COMPLETE PLANT WAS @ 1 MILLION EURO OWNER SELLS FOR 200.000 EURO (EXW)