1. Control Technology Incorporated

2. Introduction to 2500-ACP1 Application Coprocessor 2500-WB-USB Workbench Integrated Development Environment for IEC-61131

3. 2500 Series ® System in 2006 3 2500 Series ® System Today

4. Goals for this Webinar Introduction to Advanced Function Modules and the 2500P-ACP1 Application Co-Processor Overview of how the ACP1 works Introduction to IEC-61131 and the CTI Workbench Integrated Development Environment Hands-on demonstration of the key features of Workbench 4

5. Advanced Function Modules Simatic/TI 505 architecture had limited capability for backplane communication of large amounts of data – as needed for today’s data-intensive applications In 2012, CTI solved this limitation with the introduction of the high-speed backplane and Advanced Function Modules Advanced Function Modules can communicate to the CPU using a 100Mbit/s Ethernet channel – Ethernet channel is provided today using a patch cable from the module to the CTI CPU Ethernet port – Up to 8 Advanced Function modules can be attached to a CPU – In the future, the Ethernet channel will be located on the hardware backplane At the end of each PLC scan, a time slice is provided for highly-optimized communication to Advanced Function Modules 5

6. 2500P-ACP1 Application Coprocessor Programmable, instead of fixed-function like the 2500P-ECC1 Programs using new CTI Workbench Integrated Development Environment for IEC- 61131 Exchanges process data between RLL program on the host PLC and Workbench program using – High density word interface (32X, 32Y, 32WX, 32WY) for legacy TI505 systems – Ethernet patch cable to CTI CPUs – High speed backplane channel (future) Supports Ethernet communications to external devices – CAMP client (connect to other CTI CPUs and 2572/2572A modules) – Modbus Client/Server (Ethernet and serial) – ASCII communications (serial) – Network Data Exchange communications using publish/subscribe directly to other 2500P- ACP1 or 2500P-ECC1 modules – Ethernet/IP (coming 1Q2015) Data logging to SD card under control of Workbench program, and automatic transfer of files to ftp server Applications: emission monitoring, gas flow calculations, turbine control, automatic loop tuning, multivariable control, data logging & archiving Highlights 6

7. 2500P-ACP1 Application Coprocessor How Does It Work? 2500P-ACP1 running IEC-61131 application in RLL, ST, FBD, IL RLL IEC 61131 2500-Cxxx running program in RLL + SF 7

8. 2500P-ACP1 Application Coprocessor Allows you to move extensive or time-consuming calculations to a separate processor Much more extensive instruction set gives new capabilities that are not possible using existing “TI-RLL” or SF programs Allows you to experiment and begin a migration to IEC-61131 without having to re-engineer your process program Program/process expansions can be added in IEC-61131 using the coprocessor – For validated processes, no changes to the existing program means little or no re-validation Program source can be stored on the module! What Does It Do For Me? 8

9. Workbench Development Model 9 T5 Code Develop, compile, simulate, debug on PC Can work on many programs at once Can run multiple instances of Workbench Download to target over Ethernet, debug directly on target Full version control with verification on target. Can store source on target On-line change supported Execution speed 4x-6x faster than comparable Workshop program running on 2500-C400

10. 2500P-ACP1 and Workbench Read V50 from CPU-A, multiply by 2, put result in V51. Create a counter which increments on every cycle of the Workbench program. Write the value of the counter to V52 in CPU-A using the data cache connection Write the value of the counter to V52 in CPU-B using CAMP Client to the 2572 Ethernet port Demonstration CPU-A ECC1-A ACP1 CPU-B ECC1-B 2572 10

11. 2500P-ACP1 and Workbench 2500P-ACP1 is an important bridge product that lets you – Develop process extensions using a feature-rich IEC-61131 programming environment – Experiment and begin a migration to IEC-61131 without having to re-engineer your process program Workbench is a new, modern process automation development tool that gives you a new option for programming the 2500 Series® System Future CTI CPUs will support development using Workbench Support for RLL using Workshop will continue Summary 11

12. 2500P-ACP1 and Workbench 2500P-ACP1 Application Coprocessor $2,295 2500P-WB-USB$1,495 2500P-WB-USB-PR$495 (Special promo price with purchase of ACP1) Pricing 12

13. The CTI Commitment to You Employ the best of today’s technology, while emphasizing simplicity and ease of use Build on your existing investment to minimize the risk and cost of change Connect you to best-in-class solutions Offer you highly personalized customer service, while still maintaining our global reach 13

14. Thank You