1. AT&T Cabling Systems AT&T CopperLine November 2014

2. AT&T Cabling Systems provides complete and state-of-the-art LAN cabling solutions and components for all needs of enterprise customers. Our high- performance network infrastructure solutions based on innovative designs and highly advanced technology are the first choice for all applications. Combining unmatched reliability with the unparalleled AT&T Millennium™ Lifetime warranty, AT&T Cabling Systems are your key to years of fail-safe and trouble-free operation, minimizing system down-time and maximizing your profits. Overview AT&T Millennium™ is a trademark of AT&T Cabling Systems

3. End to end state-of-the-art indoor copper cabling components All AT&T CopperLine products fully conform to EU Directive 2011/65/EU (RoHS-2) AT&T CopperLine Products

4. AT&T CopperLine includes a full range of copper cabling components: Horizontal & backbone cable Flexible (stranded conductor)cables RJ45 plugs and jacks RJ45 modular cords RJ45 Consolidation Point cords (plug to jack) Patch panels Outlets, faceplates and connection boxes Accessories & cable management AT&T CopperLine products are available in all present cabling categories: Category 3 (selected products) Category 5 (legacy products) Category 5e Category 6 Category 6A Category 7 Category 7A 1200MHz (Cable only)

5. AT&T CopperLine Indoor Horizontal & Backbone Cables All cables available in PVC or LS0H jackets and various flame tests, including IEC 60332-1, IEC 60332-3-24 or IEC 60332-3-25. Most cables available in simplex or duplex (FIG-8) constructions. All S/FTP cables available with EU CPR 305/2011/EC B2ca s1 d0 classification. Stranded conductor cables for work-area cords are available upon request.

6. AT&T CopperLine Indoor Horizontal & Backbone Cables Backbone U/UTP 4-Pair F/UTP 4-Pair U/UTP 4-Pair U/FTP 4-Pair F/FTP 4-Pair S/FTP 4-Pair SF/UTP

7. AT&T CopperLine Indoor Horizontal CAT6A Unshielded Cables AT&T CopperLine Category 6A unshielded cables (with either PVC or LS0H jacket) are specially designed, providing outstanding transmission properties combined with unparalleled alien-crosstalk rejection. Each of the 4 pairs is wrapped with a metal foil but during termination these foils are removed without being grounded (as there is no ground wire). This provides an unshielded system, where the metal foils do not act as a shield but they do minimize the alien crosstalk far below the standard limits and far below any U/UTP system can ever provide. AT&T CopperLine unshielded CAT6A components design enables us to provide the AT&T Millennium™ Lifetime Warranty without testing the alien crosstalk on site. AT&T Millennium™ is a trademark of AT&T Cabling Systems.

8. Standard Conformance All LS0H cables meet IEC 60754 & IEC 61034 default requirement (Acid gas release and Smoke density) Most standard cables are ETL Verified.

9. AT&T CopperLine Indoor Connectors Most connectors are available in unshielded and shielded versions.

10. AT&T CopperLine Indoor RJ45 Keystone Jacks CAT5e Punch-down Unshielded CAT6 CAT6A Punch-down Shielded Tool-Less & Angled Shielded Light-blue Dark-blue Black Punch-down & Angled Unshielded

11. AT&T CAT 5e, CAT 6 & CAT6A shielded and unshielded jacks have a small form factor so they fit into AT&T CopperLine 48-Port 1U panels. AT&T CAT 5e, CAT 6 & CAT6A shielded and unshielded jacks can be terminated with AT&T CopperLine 4-Pair MultiPunch tool, using all the same blade. AT&T CAT 5e, CAT 6 & CAT6A shielded and unshielded jacks are compatible with 22, 24 or 26AWG solid or stranded conductors. AT&T CAT 5e, CAT 6 & CAT6A shielded and unshielded jacks IDC can hold two conductors simultaneously. AT&T CAT 5e, CAT 6 & CAT6A shielded and unshielded jacks have 50µ” gold plated contacts. AT&T CAT6A shielded and unshielded jacks pass the CAT6A alien-crosstalk requirements when tested in either 24-Port or 48-Port 1U panels. AT&T jacks are easily identified by their color-coded IDC section: Light blue: CAT 5e. Dark blue: CAT 6. Black: CAT 6A AT&T CopperLine Jacks Features

12. The jack is not shielded, but the ADC section is covered with a metal cap. This provides an unshielded system, where the metal cap does not act as a shield but it does minimize the alien crosstalk far below the standard limits. AT&T CopperLine Indoor RJ45 Unshielded CAT6A Jacks AT&T CopperLine Category 6A unshielded jacks are specially designed to provide outstanding transmission properties combined with unparalleled alien-crosstalk rejection. AT&T CopperLine unshielded CAT6A components design enables us to provide the AT&T Millennium™ Lifetime Warranty without testing the alien crosstalk on site. AT&T Millennium™ is a trademark of AT&T Cabling Systems.

13. Standard Conformance Most connectors are ETL verified and UL Listed. Note: CAT 7 (IEC 60603-7-7) and CAT 7A (IEC 60603-7-71) connectors are not included in our program as they do not support any additional LAN application. CAT 8 connectors will be included after the standard is ratified.

14. AT&T CopperLine Indoor RJ45/RJ45 Modular Cords All cords available in PVC or LS0H jackets and IEC 60332-1 flame test. All cords available in various lengths and colors. Standard jacket color: Gray. Standard plug color: Black. CAT7/7A cords are not available. CAT 8 cords will be available when category 8 is ratified.

15. AT&T CAT 5e, CAT 6 & CAT6A shielded and unshielded cords have 50µ” gold plated contacts. 100% of all AT&T CAT 6 & CAT6A modular cords are tested at the component level from each side. Test reports for each batch supplied are available upon request. 100% of all AT&T CAT6A modular cords are tested in a CAT6A channel. Test reports for each batch supplied are available upon request. AT&T CAT 6A unshielded cord special design guarantees full conformance to the alien crosstalk requirements even when bundled tightly. AT&T CAT 5e, CAT 6 & CAT6A shielded and unshielded cords have a slim mold fitting into any high-density switch or panel. AT&T cords unique strain-relief prevents damage and degradation during use. The unique AT&T Globe logo ensures the product authenticity. AT&T CopperLine Modular Cords Features

16. Standard Conformance All LS0H cords meet IEC 60754 & IEC 61034 default requirement (Acid gas release and Smoke density). All cords meet IEC 60332-1 (cable) and UL 94V-0 (plug) flame tests. Most cords are ETL verified and UL Listed.

17. AT&T CopperLine Indoor Consolidation Point (CP) Cords (Plug to jack extension cords) All CP cords available in PVC or LS0H jackets and IEC 60332-1 flame test. All CP cords available in various lengths and colors. Standard cable jacket color: Gray. All CP cords available with solid conductor cables or stranded conductor cables. All CP cords are 100% factory tested, ensuring full compliance with the relevant category.

18. Standard Conformance All LS0H CP cords meet IEC 60754 & IEC 61034 default requirement (Acid gas release and Smoke density). All components used to assemble the CP cords are ETL Verified. All CP cords meet IEC 60332-1 (cable) and UL 94V-0 (plug & jack) flame tests.

19. AT&T CopperLine Indoor Category 3 Patch Panels Wiring: 2 pairs per port: 3-6 & 4-5. Compatible conductors: 23-26 AWG Solid or stranded. Both panels available with 110 IDC or LSA-Plus blocks.. CAT3, 50-port, 1U Unshielded Panel CAT3, 30-port, 1U Unshielded Panel Standard conformance: Category 3 ANSI/TIA-568-C.2. UL 94V-0 flame test.

20. AT&T CopperLine Indoor 19” Blank Unshielded Patch Panels All plastic parts conform to UL 94V-0 flame test.

21. AT&T CopperLine Indoor 19” Blank Unshielded Patch Panels 24-Port 1U Suitable for straight unshielded jacks. 24-Port 1U Suitable for angled unshielded jacks. 48-Port 1U Suitable for straight unshielded jacks. 24-Port 1U Suitable for straight unshielded jacks. Standard Panel Angled Panel High-Density Panel Staggered Panel

22. AT&T CopperLine Indoor 19” Blank Shielded Patch Panels All plastic parts conform to UL 94V-0 flame test.

23. AT&T CopperLine Indoor 19” Blank Shielded Patch Panels 24-Port 1U Suitable for straight shielded jacks. 24-Port 1U Suitable for angled shielded jacks. 48-Port 1U Suitable for straight shielded jacks. Standard Panel Angled Panel High-Density Panel

24. AT&T CopperLine Angled Panels Features AT&T CopperLine angled panels and jacks enable easy horizontal routing of the modular cords without bending and damaging them. Angled jacks inserted into the angled blank panel Modular cords inserted into the angled jacks

25. AT&T CopperLine Outlets, Faceplates & Boxes All plastic parts conform to UL 94V-0 flame test.

26. AT&T CopperLine Accessories All plastic parts conform to UL 94V-0 flame test. Single-wire Punch-Down Tool Single-wire punch-down tool and blade 4-Pair Punch-Down Tool AT&T MultiPunch 4-Pair Punch-Down Tool Compatible with all AT&T Punch-down jacks Note: The design of this tool has been ruggedized. New tools will be available soon.

27. AT&T CopperLine Cable Management Solutions All plastic parts conform to UL 94V-0 flame test. Duct TypeRing Type

28. AT&T CopperLine Copper Cabling Solutions for Data Centers Category 5e Plug and Play Both panels and cords fully conform to Category 5e connecting hardware according to ANSI/TIA-568-C.2 All cords are available with PVC or LS0H jacket. The cords are available with 120° and 180° plugs. Standard cord lengths range from 10 to 50m.

29. AT&T CopperLine Copper Cabling Solutions for Data Centers Category 5e Plug and Play RJ45 Pre-Terminated Cassettes in 24-Port Panels Standard assembly lengths range from 5 to 50m. Pin-pair assignment: T568B All cables are low-smoke, halogen-free and flame retardant (LS0H).

30. Standard Conformance All components and assemblies conform to the relevant parts of the following standards: Category 5e & Class D according to ISO/IEC 11801 Category 5e & Class D according to EN 50173 Category 5e according to ANSI/TIA-568-C.2 Cable: IEC 60332-1 Construction materials: UL94 V-0 flame tests IEC 60754 & IEC 61034

31. AT&T CopperLine Copper Cabling Solutions for Data Centers Category 5e Plug and Play RJ45/RJ45 Pre-Terminated Cable Bundles Standard bundles lengths range from 10 to 50m. Pin-pair assignment: T568B

32. Standard Conformance All components and assemblies conform to the relevant parts of the following standards: Category 5e & Class D according to ISO/IEC 11801 Category 5e & Class D according to EN 50173 Category 5e according to ANSI/TIA-568-C.2 Cable: IEC 60332-1 Construction materials: UL94 V-0 flame tests LS0H bundles: IEC 60754 & IEC 61034

33. AT&T CopperLine Copper Cabling Solutions for Data Centers Category 6 Plug and Play RJ45 Pre-Terminated Cassettes in 24-Port Panels Standard assembly lengths range from 5 to 50m. Pin-pair assignment: T568B All cables are low-smoke, halogen-free and flame retardant (LS0H).

34. Standard Conformance All components and assemblies conform to the relevant parts of the following standards: Category 6 & Class E according to ISO/IEC 11801 Category 6 & Class E according to EN 50173 Category 6 according to ANSI/TIA-568-C.2 Cable: IEC 60332-1 Construction materials: UL94 V-0 flame tests IEC 60754 & IEC 61034 Most components are ETL verified and UL Listed.

35. AT&T CopperLine Copper Cabling Solutions for Data Centers Category 6 Plug and Play RJ45/RJ45 Pre-Terminated Cable Bundles Standard bundles lengths range from 10 to 50m. Pin-pair assignment: T568B

36. Standard Conformance All components and assemblies conform to the relevant parts of the following standards: Category 6 & Class E according to ISO/IEC 11801 Category 6 & Class E according to EN 50173 Category 6 according to ANSI/TIA-568-C.2 Cable: IEC 60332-1 Construction materials: UL94 V-0 flame tests LS0H bundles: IEC 60754 & IEC 61034 Most components are ETL verified and UL Listed.

37. AT&T CopperLine Copper Cabling Solutions for Data Centers Category 6A Plug and Play RJ45 Pre-Terminated Cassettes in 24-Port Panels Standard assembly lengths range from 5 to 50m. Pin-pair assignment: T568B All cables are low-smoke, halogen-free and flame retardant (LS0H).

38. Standard Conformance All components and assemblies conform to the relevant parts of the following standards: Category 6A & Class E A according to ISO/IEC 11801 Category 6A & Class E A according to EN 50173 Category 6A according to ANSI/TIA-568-C.2 Cable: IEC 60332-1 Construction materials: UL94 V-0 flame tests IEC 60754 & IEC 61034 Most components are ETL verified and UL Listed.

39. AT&T CopperLine Copper Cabling Solutions for Data Centers Category 6A Plug and Play RJ45/RJ45 Pre-Terminated Cable Bundles Standard bundles lengths range from 10 to 50m. Pin-pair assignment: T568B

40. Standard Conformance All components and assemblies conform to the relevant parts of the following standards: Category 6A & Class E A according to ISO/IEC 11801 Category 6A & Class E A according to EN 50173 Category 6A according to ANSI/TIA-568-C.2 Cable: IEC 60332-1 Construction materials: UL94 V-0 flame tests LS0H bundles: IEC 60754 & IEC 61034 Most components are ETL verified and UL Listed.

41. Final words AT&T Cabling Systems provides an extensive portfolio of the highest-quality cabling products, backed by unparalleled QA systems and warranties, supported by the rigorous inspection and control of the strongest communications brand in the world. Our extensive network of EMEA distributors are geared to provide technical support and custom- made innovative solutions to any cabling challenge.

42. AT&T Authorized Licensee. AT&T, the AT&T Globe Design and all other AT&T marks contained herein are trademarks of AT&T Intellectual Property and/or AT&T affiliated companies. Issue 1.0 3/06/2013 AT&T Cabling Systems Thank you. Rev. 5 – 26 NOV 2014