Presentation is loading. Please wait.

Presentation is loading. Please wait.

1.  The UCTT(Universal cellular test tool) 8901 is a powerful multi-functional test instrument containing a comprehensive set of measurement resources.

Similar presentations


Presentation on theme: "1.  The UCTT(Universal cellular test tool) 8901 is a powerful multi-functional test instrument containing a comprehensive set of measurement resources."— Presentation transcript:

1 1

2

3  The UCTT(Universal cellular test tool) 8901 is a powerful multi-functional test instrument containing a comprehensive set of measurement resources for the cellular industry. While the UCTT combines several complex instruments into one package, the menu and user interface has a simple consistency that allows intuitive operation for most users familiar with cellular testing and maintenance practices. The following section highlights the portions of the manual that should be reviewed to get started testing with the UCTT. 3

4 4

5  Single tool Box: i. Spectrum Analyzer ii. Power Meter iii. Return Loss iv. DTF v. VSWR vi. 1 Port Loss vii. 2 port VNA viii. GSM /EDGE ix. CDMA / EVDO x. UMTS/HSPA+ xi. LTE xii. Wi-MAX xiii. BERT (DS1) xiv. ACP xv. SPECTROGRAM xvi. CHANNEL SCAN xvii. SIGNAL GENERATOR xviii. Signal Location 5

6  Next Generation Test Solution for 3G and 4G wireless networks  Brilliant Sunlight Readable Display  Lightning Fast Touch Screen  Most versatile one-box test solution for BTS, RN,eNode B  Most durable, withstands harsh environments as per MIL-STD-810  Measurement performance rivals laboratory instruments. 6

7 Spectrum Analyzer Power Meter BER Meter DS0/DS1 Communication Analyzer GPS SPECTROGRAM Analyzer Signal Generator WIMAX Analyzer SITE ANALYZER 7

8 8

9 Rotatary Knob Directional keys Numeric Key pad with save recall Date and time Soft keys Display Touch screen Enter key Mode key On/OFF switch 9

10  1. Power Connector  2. USB Type A Connector  3.Accessory Connector  4. USB Type B Connector  5. External Reference Connector  6. Even Second Connector  7. 10/100 Base T Connector Ethernet.  8. RF In Connector  9. RF Out Connector  10. PCM 1 Connector RJ45  11. GPS Antenna Connector  12. PCM 2 Connector - RJ-45 10

11 BTS CELL SITE BTS CELL SITE BTS CELL SITE SWITCH CENTRE Transport Network Cable & Antenna Analyzer RF Measurements(GSM, GPRS, EDGE, UMTS, WIMAX, CDMA, EVDO & LTE) E1 tester Spectrum Analyzer Interference Analyzer FFT Spectrum Analyzer Channel scanner Spectrogram Signal Location Power Meter 11

12 12

13 RL/VSWR Used to test Antenna Path Efficiency DTF Used to detect and locate cable faults (impedance mismatches). CABLE lOSS Used to check cable and connector loss. 13

14  UCTT IS CAPABLE TO MEASURE :  Freq range: 698 MHz to 2.7 GHz I. RL/VSWR II. DTF III. 1 Port Cable Loss IV. 2 Port Cable Loss (insertion loss) V. Cable Loss and Delay (Phase – Full VNA) VI. Precision Power Meter  An tennas are connected to the Tx/Rx, as well as switching and signal processing equipment by means of a coaxial cable.  It is important that these components are “matched” from an RF standpoint, otherwise reflections occur. 14

15 Return Loss (RL)Distance to Fault (DTF) 15

16 POWER METER2 PORT VNA 16

17  15 MHz FFT Spectrum Analyzer  Range: 698 MHz to 2.7 GHz  Frequency Span: 10 KHz to 2GHz, Zero Span, 1000 Data Points  Resolution Bandwidth: 100 Hz to 2.7 MHz, Auto  Trace Detect: Peak Hold & Peak Trigger  DANL: -144 dBm.  Reference Level Range: -100 dBm to +60 dBm  Input Attenuation: 0 to 55 dB, Auto  Dynamic Range: 90 dB.  Zero-Span (Time Domain, O-Scope) 17

18 This UCTT SA provides over the air measurements for a quick RF performance characterization of the RF Environment. This function is especially useful in testing cell sites which are not easily accessible. The FFT Spectrum analyzer with wideband analysis bandwidth takes 15 MHz snapshots, not sweeps, of spectrum. A must for wideband signal analysis and interference monitoring. 18

19 This UCTT Analyzer provides over the air measurements for quick Time Domain performance characterization using Zero-Span. This function is especially useful in testing cell sites which are not easily accessible and are using TDM modulated signals (GSM/EDGE/LTE)

20  POWER METER  The beauty of this BTS tester is it can Measure the Power directly with out any additional power sensors, with a frequency range from 698MHz to 2.7GHz, Measurement range from - -140 dBm to +30dBm with out any external attenuator with an accuracy of +/- 0.25dBm to 0.5 dBm. 20

21  GSM, EDGE, UMTS (WCDMA), HSPA+, LTE (FDD/TDD), CDMAOne/2000/EVDO, WiMax ◦ Provides more complete Demods ◦ Modulation Quality ◦ Timeslot and Burst Analysis ◦ Demodulation Analysis (I/Q Diagram) ◦ Demodulated Average Channel Power ◦ Over-the-air Pilot Scanners ◦ Configurable Pass/Fail Result Screens 21

22 Advanced Demod Samples EDGE RF & Timeslot UMTS Summary

23 23 Advanced Demod Samples EVDO Summary LTE Cell-ID Scanner

24 24 Advanced Demod Samples LTE MIMO Scanner LTE Frame View

25 25 Advanced Demod Samples LTE Pass/Fail LTE RF View

26 Transmitter Performance ◦ RF Mask Analysis ◦ Channel Scanner ◦ Adjacent Channel Power (ACP) ◦ Built-in Power Meter  +/- 0.25 dB Accuracy 26

27 27 Transmitter/Spectrum Measurements Adjacent Channel Pwr Channel Scanner

28  FFT Spectrum analyzer with wideband analysis bandwidth ◦ Superior for Interference Monitor (Spectrogram)  Signal Locator uses maps to triangulate and an audible aid to locate signals  Spectrogram shows frequency hot spots and logs data.  Vector Signal Generator ◦ Supports All Modulation Types [Planned: GMSK, 8PSK, WCDMA]  Backhaul Protocol Monitor & Analyzer ◦ Decodes Audio ◦ Monitor Protocol (Planned: ABIS Interface) 28

29 29 Interference Analysis Spectrogram Signal Location

30 30 Simultaneous Sig Gen & Recv Vector Signal Generator EDGE Signal

31  Backhaul Integrity Testing ◦ Supports Dual T1/E1 BERT Tests:  Error Injection  Monitors Physical Layer  Supports G.821 & G.826 Alarms  Pulse Mask Analysis  One-way and Round Trip Delay ◦ Roadmap: GigE Metallic (10/100/1000)  RFC 2544 Ethernet Testing  Ethernet Cable Tester 31

32 32 BackHaul Testing Dual E1/T1 BERT Span Monitor

33 ◦ Command Line Interface (Scripting) ◦ PC GUI Front Panel Emulation ◦ Post-Test Trace Analysis Software 33

34 34 UCTT Software Utilities Remote Control UI Post Test Analysis

35 35 Ease of Use Navigation o Super Responsive Touchscreen o “iPhone Like” Navigation Controls o Full 10.4” Screen View o Data Capture & File Mgmt (8 GB Memory!)

36 36 Touchscreen Navigation Swipe Box Expanded View

37 37 Simple Administration System Screen Span Monitor

38 38

39 AISHWARYA TELECOM LIMITED39


Download ppt "1.  The UCTT(Universal cellular test tool) 8901 is a powerful multi-functional test instrument containing a comprehensive set of measurement resources."

Similar presentations


Ads by Google