2. TREO Manufacturing, LLC was founded in May of 2012 by Rick Stephens and Charles Snooks. They together have a tremendous amount of experience in product development, plastic processing development and manufacturing. We are established as a manufacture of plastic injection molds, blow molds and plastic extrusion dies with the ability to conduct molding trials in house as well as production manufacturing requirements. Today we currently support the automotive, appliance, landscape and mass-marketed OEM’s and their Tiered supply base. In addition, our TREO team continues to innovate and explore solutions to aid in your corporate savings goals. Our ownership commitment, size of operation and efficiencies allow TREO to be cost competitive while achieving our customers stipulated timing. We recently relocated to our new facility in Troy, Michigan providing us a larger foot print to launch our PLASTIC MOLDING TECHNICAL CENTER. Within the center we work with our customers to resolve molding issues, further develop RHRC processing and cellular molding, in addition to other unique processes, permitting TREO and our customers to thrive in the our competitive global marketplace.

3. To improve plastic manufacturing capabilities through excellence in the science and art of plastic processing, tooling construction technologies and education. MISSION VISION Transforming and improving the plastic manufacturing community one company at a time making our partners leaders in the manufacturing community insuring global competiveness. VALUES Provide each Partner with Proven Results and Success Educate and Train Tomorrows Manufacturing Professionals Insure Success Through Knowledge Continuous Improvement A Social Conscience TREO mission statement…..

4. CAPABILITIES AND PRODUCTS -INJECTION MOLDING up to 500 Ton. (RHRC, Gas Assist, Cellular Molding) -BLOW MOLDING up to 8 lb. shot. (Soon to have High Gloss Blow Molding Capabilities) -PLASTIC EXTRUSION up to 500 pph. (Multiple Resin plus Cross Head Roll forming) -PRODUCT and TOOLING DESIGN (Cimatron and Mechanical Desk Top / stp., iges., Etc.) -PROTOTYPE TOOLING and ASSEMBLIES. (Air Induction, IP Components, Weather Strips, Ducting, Class A Injection and extruded components the list goes on and on.) -MANUFACTURING AUTOMATION. (Automated hand assembly assist, Automated assembly, weld, trim, punch etc.) -PROCESS TRAINING PROGRAMS. (Customers can have Plant Personnel trained with specific processes) -LOW VOLUME SHORT RUN MANUFACTURING. STERLING 5-8 lb BLOW MOLDER 4 Axis Wire EDM HAAS 5 AXIS machining Center HAAS 3 AXIS machining Center

5. MORE ABOUT RHRC…… We currently utilize, High Pressure High Heat Steam, High heat / High Pressure H2O, E-MOLD and Induction. We are also developing new technologies with our Partner Process Manufacturers. 500 Ton Sumitomo / 2013 NADA E-MOLD / 2013 BOILER SYSTEM 2011 MATSUI STEAM CONTROLLER / 2013 MATSUI HIGH PRESSURE HIGH HEAT THERMOLATOR / 2014 MATSUI HIGH EFF DRYER / 2014 INCOE 16 VALVE GATE CONTROLLER / 2013 COMING LATE JUNE 2014… INDUCTION HEATING VIA ROBOT!

6. TYPICAL RESULTS SEEN WITH RHRC…… Typically we have been able to take a customers existing conventional tooling and apply a RHRC process, thus providing an immediate solution to their problem products. We can then assist with the design considerations and production tool build to launch into production. ENHANCED TEXTURING ELIMINATION OF METALLIC STREAKS ELIMINATION OF NIT LINES BURY AND ENHANCE GLASS FILLED PRODUCT BURYING OF GLASS AND ENHANCED PIANO BLACK FINISH

7. HIGHLIGHTS OF CAPABILITIES……ALL OF WHICH INCLUDE SHORT LEAD TIMES AND COMPETITIVE COST. INJECTION MOLDING: -Transfer Molding -Insert Molding -RHRC Molding -Gas Assist Molding -Cellular Molding -Tryout of Outside Tooling. BLOW MOLDING: -Upper/Lower Blowing -Needle Blowing -High Gloss Blow Molding (In Process Development) -In Tool Knife And Punches. -Aluminum Prototype And Production Tooling. -Tryout of Outside Tooling. PLASTIC EXTRUSION: -Multi Resin -Profile and Narrow Sheet. -Cross Head, Including roll formed Bi-Laminate. -In Die Flocking -Automated in Line part Finishing. -Prototype And Production Tooling. In house Development and Customer location tune in. PROTOTYPE / ASSEMBLIES: -Multi Product Assemblies and Sub Assemblies. -Welding, Spin, Notch etc. Finishing. -Production Validation. PRODUCT & PROCESS DEVELOPMENT: -Product and Material Development. -RHRC. -Gas Assist and Cellular Development. -In-Mold Finishing. -Welding, Spin, Notch etc. Finishing. -Production Validation.

8. SOME OF THE PRODUCTS MANUFACTURED AND PROTOTYPED HERE AT TREO……

9. FACILITIES AND SPECIFICATIONS -20 member team -4 Design Personnel -3 CNC Milling machines with 3+2 5 axis capabilities. -4 Axis Wire EDM Capabilities. -In-House Try-Out capabilities for all mentioned processes. -Lessons Learned Tryout Methodology. -ISO 9000 Accredited. -2000 amp 480 volt power. -3 Cranes (1) 5 ton (2) 2.5 Ton -Automated ERP system for program tracking and Systems Adherence. 1872 RING DRIVE TROY, MICHIGAN 48083 248.588.5800 Office 248.588.3001 Fax www.treomfg.com www.treoftp.com 24,000 sq. ft. facility FTP Site:

10. SHAWN NAPPER INSIDE SALES AND MARKETING 586.428.0017 Cell shawnn@treomfg.com CHARLES SNOOKS 586.291.8528 Cell charless@treomfg.com RICK STEPHENS 586.201.7961 Cell ricks@treomfg.com www.treomfg.com FTP: www.treoftp.com www.treoftp.com