Presentation is loading. Please wait.

Presentation is loading. Please wait.

By iHR Presented by Adele Theobald

Similar presentations


Presentation on theme: "By iHR Presented by Adele Theobald"— Presentation transcript:

1 By iHR Presented by Adele Theobald
Risk Assessment By iHR Presented by Adele Theobald

2 Group Activity Tell me what you know already
5 minutes to write down as many words and phrases on a flipchart as a group that tells us what you know about RISK ASSESSMENT

3 Today Why do I need a risk assessment What is a risk
What is a risk assessment Hazards Risks Control Measures Case Studies

4

5 Why do I need a risk assessment?
It’s the Law Health and Safety at Work etc. Act 1974 The Management of Health and Safety at Work Regulations 1999 Isn’t it the right thing to do? It could protect and save YOU and me

6 Types of Risk Assessment
Qualitative: Object probability estimate based upon known risk information applied to the circumstances being considered Quantitative: This type is subjective, based upon personal judgment backed by generalised data risk. The two types of risk assessment (qualitative and quantitative) are not mutually exclusive Qualitative assessments are easier to make and are the ones required for legal purposes We use Quantitative in every day activities.

7 Hazards and Risks Confused which is which?

8 The difference… Hazard Risk
Is the potential of a substance or process to cause harm Risk Is the probability of a hazard actually causing harm

9 Example Hazard of Asbestos Risk of inhaling Asbestos fibre’s
causes mesothelioma (lung cancer) Risk of inhaling Asbestos fibre’s minimal if asbestos board is in good condition. However, risk is greater if the asbestos board is in poor condition or is broken

10 Hazards A Hazard is any substance or process which may cause harm
In order to conduct a risk assessment it is necessary to consider any hazards that may be present in your workplace For example Do you use any hazardous substances… e.g. paints, solvents, acids? Is it a noisy environment? Do you work at height? Does your process generate any particles or gases? Do you use display screen equipment?

11 Hazards Peak Noise Exceeding 135d Metal/Plastic Chards
Chemical Splashes Chemical Gases & Vapours Radiation: UV, Visible, Infra Red Using Display Screen Equipment Continuous Noise Exceeding 80dB Particulate: Dusts, Mists, Metal, Fumes

12 Substitute/Alter/Exchange/Remove Personal Protective Equipment
Hierarchy of Control Substitute/Alter/Exchange/Remove Change Process Substitute Product Engineer Controls Install fixtures/equipment Install fittings Personal Protective Equipment Products to wear Products to use

13 Where to find information
The person who may be affected Accident Reports/History Material Safety Data Sheets (MSDS) Container labels Trade journals Risk phrases HSE

14 Safety Data Sheets Materials Safety Data Sheets Includes details on:
Name & Address of supplier Chemical Composition/Ingredients Physical Data Exposure Controls & PPE Fire Fighting Information First Aid Advice

15 Journals Container labels & trade journals
Container labels will often list the “ingredients” in a product Industry trade journals may provide useful information on various common hazards

16 Risk Phrases These are definitions of chemicals – as detailed in CHIP 2 Regulations Examples: R1 - explosive when dry R26 - very toxic by inhalation R35 - causes severe burns R42 - may cause sensitisation by inhalation R43 - may cause sensitisation by skin contact R49 - may cause cancer by inhalation

17 Risks A risk is the probability of a hazard actually causing harm
The level of risk can be different for different workers, for example expectant mothers people with disabilities new workers young workers For respiratory and hearing hazards, the risk associated is usually assessed by the level of exposure experienced by an individual compared with occupational limits.

18 Assessment The level of exposure to a hazard is critical when conducting a risk assessment This will determine whether the hazard is a threat Monitoring methods include; passive badge samplers, noise meters and personal pump monitoring This can indicate a personal dose, which is the best assessment of the potential risk to an individual Other assessment methods also exist. E.g. HSG53, HSE Guide to Selecting RPE.

19 COSHH WELs are occupational exposure limits set under CoSHH (Control of Substances Hazardous to Health) They are concentrations of hazardous substances in the air, averaged over a specified period of time Two time periods are used, short term (15 minutes) and long term (8 hours) Employers have a legal duty under CoSHH to control exposure to chemicals hazardous to health.

20 Noise

21 Could you… Alter the work process in order to eliminate or reduce the risk of a hazard? Substitute a hazardous substance for a less hazardous chemical? Elimination/substitution should be your first consideration when aiming to reduce risk, but this may not always be a viable option.

22 Controls If you are not able to eliminate the hazard, you might consider other controls could better ventilation reduce exposure to a hazardous particle? could non-slip matting be fitted to reduce the risk of falls? could luminous tape be fitted to reduce the risk of tripping? Some cases, however, the hazard may still present a significant risk after these controls have been put in place. In this case you might consider PPE.

23 Common Errors Hazard lists are not kept up to date or people are unaware of the hazards No training is provided for those who need to be aware of and use the risk assessment The Risk Assessment is carried out by a person not deemed as competent The Risk Assessment becomes out of date The person who is at risk of harm or injury has never seen the risk assessment Control measures are by-passed

24 Risk Assessment A risk assessment is an information gathering exercise about: Hazards, Risks and Controls Requires information on: Substances Work processes (location, duration, equipment) Assessments of the levels of exposure Evaluations of control measures

25 Summary Employers must identify hazards
Employers must assess the Risks – A Risk Assessment A Risk is the probability of a Hazard actually causing harm A Risk Assessment should identify hazards consider the risks control the risks PPE is the last resort or used as a control measures The person(s) who might be harmed, or those expected to follow the risk assessment should be part of creating it, understand it, and/or be trained in/with it.


Download ppt "By iHR Presented by Adele Theobald"

Similar presentations


Ads by Google