1. 1 DVR SYSTEM User’s Manual Manual Revision : Version 1.0 Release Date : Nov. 2, 2002 ■ SERVER ■ CLIENT

2. 2 DVR User ’ s Manual 1. DVR Sever 1-1. Display Mode Main screen Pan/Tilt Control 1-2. Setup Mode Standard Setup Recoding Setup Schedule setup Motion Detection Setup Color Setup PAN/TILT Setup Network Setup Backup Setup 1-3. Search Mode Search screen Data Back up Search Data & Time Print 2. Client program INDEX

3. 3 1. DVR SERVER 1-1. Display mode

4. 4 A. Camera Number/recording state ( : Camera No. / : Recording / : Motion / : Sensor ) B. Display present images C. Select screen division C. Select screen division among 1/4/6/7/8/9/10/13/16Ch. D. Auto switching (Rotation) : Displays switching images by 1Ch./4Ch./8Ch. in sequence with selected time interval. E. Select camera No. F. Go to ‘ SETUP ’ Mode. G. Go to ‘ SEARCH ’ Mode. H. Power When you click the Power button, DVR system will be shut down. When you want to go Window mode, Please go to Setup. I. TIME : Display current time. B A H D E I F G DISPLAY Mode C

5. 5 J. System Info : a. Sever mode (O/S) b. b. Network connection state SYSTEM : No network connection TCP / IP : TCP / IP or Modem connection c. Present Program Version d. Capacity of HDD ** Control Overlay speed (DF-3000 Model) K. Preview : Display present recording images. L. PAN/TILT On/OFF (Refer next page) J K d a b c Increase Recording frames Increase Display frames L

6. 6 PAN/TILT Control Speed dome control CLICK! 1 2 3 4J J. PAN/TILT control : Click to active Pan/Tilt control panel. Change direction with direction keys ZOOM : Zoom In / Out. Focus : Control Focus. Speed dome control ( Refer the next page) 4 L 1 2 3 Click !

7. 7 : Setup Preset of Speed Dome Camera. Speed dome control 1. : Setup Preset. DISPLAY Mode 4 1. Preset Number 2. Preset ID 3. Edit Preset 4. Position 5. Store How to set Preset 1. Select Preset No. 2. Insert Preset ID. 3. Click to confirm the location. 4. Position : Select a desired place for preset by pan/tilt control panel.. 5. Click to save the position. 6. Repeat No.1~5 to add presets. 6. Click to close. 3 5 6 5 4 3 2 1

8. 8 2. : Setup Group. DISPLAY Mode How to set a Group 1. Select Group No. 2. Insert Group Name 3. Click to add Group List on. 4. Select Preset No. You can test preset by Click. 5. Select Moving time to next position. 6. Enter Dwell time for the position. 7. Repeat No.1~6 to add group. 8. Select a desired group on and click to run a Group. 9. Click to stop a Group. 5 6 7 4 1 2 34 Close this Box 1 2 3 4 5 6 7 8 9 Run a Group Stop a Group Rename Delete a Group Rename a Group Delete a Preset Insert a Preset between lists Add a Preset

9. 9 1. DVR SERVER 1-2. Setup mode

10. 10 STANDARD SETUP 1. Camera name : Check it to display camera name on screen. 2. Watch Dog Enable : Check it for Watch Dog Function. 3. Voice : Check it for recording the voice. 4.Camera auto switching : Select camera switching time (Default : 1sec) 5. System auto reset: Setup a time interval for rebooting the system. What is ‘ watchdog ’ ? When system is unstable while monitoring, it automatically reboot the system. go to “ SETUP ” mode 1. STANDARD setup : after system installation, setup as user ’ s requires. E 1 2 4 5 6 7 8 9 1110 3 12

11. 11 1-2. STANDARD Setup STANDARD SETUP 1 2 ☞ Check for compression method. Click ‘ picture Quality ’ and adjust it as user ’ s requires. ☞ Set Up Picture Quality by dragging bar. It means the system will compress image more or less to adjust image quality. What is ‘ Watch Dog ’ ? When system is unstable while monitoring, it automatically reboot the system. 6. Password : Enter new passwords for Setup/Search/View/Power Down mode. 7. Time setup : Setup time of system. 8. Managing Disk : Providing Scandisk Format Disk function. Reset Database 9. Companion : Select compression method. When you decrease picture quality, the size of image decrease. You can see more frames in Remote Access. MJPEG MPEG4 MPEG4+

12. 12 1-3. STANDARD Setup STANDARD SETUP 10. Reinstall : Reinstall the program. 11. Add Printer : Add printer as user ’ s require. 12. Power Mode : Select desired power mode when you shut off DVR System by clicking Power button in Main mode. Window : Go to Window Mode when you click Power button. Power off : DVR system power off when you click Power button. ☞ Click ! Next ☞ Select a manufacturer and model of the printer. ☞ Select Printer Port and click Next. ☞ Enter Printer name and click Next. ☞ After printing test, click Finish. 12 3 5 4

13. 13 1. Install DVR capture card. 2. Install DVR S/W. 3. Double click the icon to run the DVR system. 4. After turn on the DVR system, go to SETUP mode and Standard setup. 5. Click the board extension for 8Ch. Or 16Ch. Ex) If you set 1 BNC extension card, click 8Ch. If you set 3 BNC extension card, click 16Ch. 6. Click “Apply” 7. Click “OK” to reboot the system for your desired channels DF-1000, 1500, 2000 only OKCancel ☞ How to extend BNC extension boards with S/W AM 8Ch. Or 16 Ch. Extension

14. 14 RECORDING TYPE 1. Camera Number 2. Connect : Hidden camera function. ‘ None ’ selected camera does not show images on the screen while recording so that people can not notice it is recording. 3. Camera name : Click the left button of mouse where you want and enter the camera name as you want. 4. Event : You can set different recording type (sensor, motion, schedule, record, no record ) by Mouse click. When block selected, it can be changed by Right Mouse click. 5. Frame : Adjust recording how many frames for each channel. Set number of recording frames for all channel at once by right mouse click after select block. 12345 678 9 10 2. Recording Type

15. 15 RECORDING TYPE 6. Pre : Pre- Alarm function. Setup record-starting time before event happens. (Second) 7. Post : Post- Alarm function. Setup the duration time of recording after event finishes. (Second) 8. Sensor Type : Select the sensor type. Normal Open / Normal Close Type : Normal Close type sensor O : Normal Open type sensor 9.Time : Set the running time of the alarm control outputs 10. Alarm control : Alarm control off O : Alarm control on

16. 16 1. Select camera number to record by schedule. 2. Choose Record / Motion / Sensor at the desired day and time box. SCHEDULE ☞ Example : How to set a schedule ① Choose a desired camera number ② Drag mouse to decide time table to record. ③ Go back to SETUP/RECORDING TYPE to set Recording type as “ Schedule ” ④ When you want Motion Detection recording by schedule, Motion detection area and channels are must be set up correctly. 1 2 3. Schedule

17. 17 1. Channel : Select the specific camera 2. Motion area : To select motion detection area, move the mouse pointer to the desired area and select the range by dragging the mouse. No.of Motion detection area is available to set without limit. 3. Sensitivity : Move the bar to adjust the sensitivity of Motion detection 4. Delete : Deselect motion area. MOTION SETUP ☞ Select the area for motion detection with mouse. 1 2 3 4 4. Motion

18. 18 ☞ Setup the color of pictures. 1. Channel : Select a desired camera No. 2. Color area : The selected camera image is displayed. 3. Bright : Adjust brightness of the image. Saturation : Adjust saturation of the image. Contrast : Adjust contrast of the image. Hue : Adjust hue of the image. * Move the bar to adjust the images. 4. Setup User ’ s Default : Setup your desired colors to Default Color 5. Cancel User ’ s Default : Setup User ’ s Default Color to DVR Default Color. 6. All Default Color : Set All Camera to Default Color. 7. Default Color : Set a desired Camera to Default Color. COLOR SETUP 5. Color Control 1 2 3 4 567 4

19. 19 1. Select camera No. 2. Chose RX brand or Model name on and click ‘ Insert ’ button 3. Select COM port. PAN / TILT New Protocol : When you cannot find camera name on Insert New RX brand or Model name on. Click “ Insert ” button to active protocol code box, or Just contact where you purchase a system, we will set it for you. 2 4 2 ☞ Insert PAN/TILT protocol code for brand new PAN/TILT Receiver. 3 1 2 4 6. PAN/TILT

20. 20 NETWORK 1. Select TCP/IP for Remote Access (TCP/IP, Modem etc.) Select No connection when you don ’ t connect client site via network. 2. Insert ID and Password : client who try to connect from remote site will be checked and confirm to access when certain IP and Password were already registered or refuse to connect. 3. Enter new ID and Password and click Add button to be confirmed. 4. Select ID and click to delete ID. ** IP Check for TCP/IP Connection ** 4 ☞ Select type of network 7. Control User Remote Access 1 3 a 4 2 test * * ☞ Confirm Ethernet Adapter address as a server. a 211. 25. 0. 33

21. 21 1. Select camera. 2. Select a desired folder to save data. (Click Backup disk button and then Browse for folder will be displayed.) 3. Select the time period for backup with mouse. Click again the selected time period to deselect the time. 4. Click Backup button to start data backup. *CD data backup : Click to format CD before click Backup button. 5. AVI file backup : Refer next page 6. Send Email : Send AVI file via Email. BACKUP 8-1. Backup format 4 3 1 2 8. Back Up a a 5 5 Send Email 6

22. 22 BACKUP 5. Insert Description 6. Select the desired time period for backup. 7. Click “ From ” to check first data time & image for AVI file 8. Click “ To ” to check last data time & image of desired AVI file 9. Click “ Go ” to make AVI file 10. Click “ Stop saving AVI file ” to stop making AVI file. 5 3 2 4 6 ☞ AVI file back up 7 8 9 10 1 1. Select camera No. 2. Select the desired time period for backup. 3. Click “ Make AVI … ” button. 4. Select a desired folder to save data and Insert AVI File Name. ☞ Send Email 1. Make AVI file. 2. Fill up all blank If a file is too big for sender or receiver ’ s email capacity, It cannot be sent.

23. 23 BACKUP 1. When you want auto back up, select camera and time to back up 2. By click, able to select recorded image data base, and recording reservation time. 3. Auto-backup Setup Apply all channel : Select all camera. Save time : Setup time period of Data for Auto-backup. Backup time : Setup time for backup. 8-2. Backup Schedule Setup a schedule for Auto-backup. 1 2 3 8. Back Up

24. 24 BACKUP 8-3. Confirm Backup 1 4 3 5 8. Back Up 2 1. Select Camera 2. Backed up data list (time table.) : Check Back Up data – Able to check whether back up data correctly or not. The image in box when press Play button is from back up media, not from HDD. 3. Play to confirm back up image 4. Slide bar to play. 5. Play : Play Stop

25. 25 1. DVR SERVER 1-3. Search mode

26. 26 SEARCH Mode A. Search screen B. Time table Display recorded data with red line along time : Select all cameras for searching : Select desired camera No. for searching ( : Add camera numbers to be selected at same time ) : Move the Blue line for desired time for searching. : Capacity of HDD Go to “ SEARCH ” mode. H 2 A G C D 1 1 2 43 3 4 B E F

27. 27 SEARCH Mode C. ZOOM IN/OUT : Select one channel to Zoom In/Out. D. Calendar Display the date with recorded data with. Click desired date, hour & minute for searching E. Search the recorded data with below buttons Playback each frame Play Play each frame Playback Stop Playback fast Play faster Replay the recorded voice Zoom Out Zoom InDefault

28. 28 F. : BACKUP Back up the desired data to FDD : for one frame image back up : PRINT Printing image 1. Select a desired image 2. Enter Title & Event. 3. Send a image via Email. : EXIT- Go to Display Mode TIME : Display current time. G. TIME : Display current time. SEARCH Mode

29. 29 2. CLIENT

30. 30 CLIENT A. Site Name : Insert name for a connected site B. Choose network connection type. Modem => Phone No. TCP/IP => IP Address C. Enter ID & Password for the site. D. Click “ Insert ” to add up the remote site list. “ Delete ” for delete delete the site from the remote site list “ Replace ” to edit the site information E. Remote site list : Select your desired site among the list. F. Connect : Connect to the selected site CLIENT After Installation of program as same way as server, Double-click Icon. A E C F D Remote site list B E

31. 31 A. Camera Number/recording state ( : Camera No. / : Recording / : Motion / : Sensor ) B. Display present images Select a screen division C. Select a screen division among 1/4/6/7/8/9/10/13/16Ch. D. Select camera No. E. E. System Info : a. client mode ( O/S ) b. b. Network connection state SYSTEM : No network connection TCP / IP : TCP / IP or Modem c. Present Program Version d. Capacity of HDD F. Click SAVE to record displaying images of client site at client HDD. G. TIME : Display current time. CD G A B CLIENT d a b c CLIENT (Win XP) EF

32. 32 H. PAN/TILT On/OFF (Refer 6~8 page) I. Go to ‘ SETUP ’ Mode. J. Go to ‘ SEARCH ’ Mode 1. Remote Search : Search images from sever PC. 2. Local Search : Search images directly from Client PC. K. Power When you click the Power button, DVR system will be shut down J I 2 1 Local Search : Client PC can record only present display images among images from Server PC. (For example, if you select one channel on display mode, only present Image is recorded on PC.) CLIENT K H

33. 33 SETUP Mode 1. Camera Number 2. Connect : Hidden camera function. ‘ None ’ selected camera does not show images on the screen while recording so that people can not notice it is recording. 3. Camera name : Click the left button of mouse where you want and enter the camera name as you want. 4. You can set different recording type (sensor, motion, schedule, record, no record ) by Mouse click. When block selected, it can be changed by Right Mouse click. 5. Adjust recording how many frames for each channel. Setting number of record frames for all channel at once by right mouse click after select block. go to “ SETUP ” mode 12345678910 I

34. 34 6. Pre : Pre- Alarm function. Set record-starting time before event happens. (Second) 7. Post : Post- Alarm function. Set record-ending time after event finishes. (Second) 8. Sensor Type : Select the sensor type Normal Open / Normal Close Type : Normal Close type sensor O : Normal Open type sensor 9.Time : Set running time of alarm control outputs 10. Alarm control : Alarm control off O : Alarm control on SETUP Mode

35. 35 SEARCH Mode A. Search screen B. Time table Display recorded data with red line along time : Select all cameras for searching : Select desired camera No. for searching ( : Add camera numbers to be selected at same time ) : Capacity of HDD : Move the Blue line for desired time for searching. : Speed delay : Control Display Speed Go to “ SEARCH ” mode. J 2 A G C D 1 3 4 B E F 1 2 34 5 5

36. 36 C. ZOOM IN/OUT : Select one channel to Zoom In/Out. D. Calendar Display the date with recorded data with. Click desired date, hour & minute for searching E. Search the recorded data with below buttons SEARCH Mode Zoom OutZoom InDefault Play Playback Stop Playback each frame Play each frame X

37. 37 F. : BACKUP Back up the desired data to FDD : for one frame image back up : PRINT Printing image 1. Select a desired image 2. Enter Title & Event. 3. Send a image via Email. : EXIT - Go to Display Mode TIME : Display current time at client site. G. TIME : Display current time at client site. SEARCH Mode