Presentation is loading. Please wait.

Presentation is loading. Please wait.

Aristotle University of Thessaloniki QC – QA readiness at AUTh tooling and procedures D. Sampsonidis, P. Charalampous, S. Kompogiannis, and C. Lampoudis.

Published byRegina Lawson Modified over 8 years ago

Similar presentations

Presentation on theme: "Aristotle University of Thessaloniki QC – QA readiness at AUTh tooling and procedures D. Sampsonidis, P. Charalampous, S. Kompogiannis, and C. Lampoudis."— Presentation transcript:

1 Aristotle University of Thessaloniki QC – QA readiness at AUTh tooling and procedures D. Sampsonidis, P. Charalampous, S. Kompogiannis, and C. Lampoudis working group meeting Jan 2015, AUTh

2 Aristotle University of Thessaloniki Contents  Fr4 boards and Al-frames (thickness, holes)  Controls (stiffback, glue, mesh)  Drift panels (thickness, planarity, gas/electric tests)

3 Aristotle University of Thessaloniki Fr4 and Frames ElementsOptionsReadinessRemarks Fr4 board holes position Template (precision ?) ? To be copied from Module0 from CERN Fr4 boards thicknessDial gauge  Mitutoyo/ Use of custom made Al-profile track system on granite table Frames and Cooling pipes min/max thickness and bend/twist Dial gauge/CMM/ Limbo with feeler- gauge/precision ruler  Mitutoyo, CMM, Granite bar, ruler/ Use of custom made Al-profile track system on granite table Frames holes positions Template precision (?) ? To be copied from Module0 from CERN

4 Aristotle University of Thessaloniki Control ElementsOptionsReadines s Remarks Stiffback periodical check Rasniks/Ruler  Rasniks Glue portion deposited (fixed glue weight/speed deposition) ? Use of custom made Al-profile track system on granite table Mesh cleaniness ?? Suggestions from experts

5 Aristotle University of Thessaloniki Drift panels ElementsOptionsReadinessRemarks Thickness - Planarity CMM, laser tracker, dial gauge  Mitutoyo, CMM/ Use of custom made Al-profile track system on granite table Gas tightness Use of vessel, Ar sniffer, dp/dt ?? Ar sniffer available on site Mesh tensionTension-meter  Grunig G-check tension-meter available on site Electrical tests Power supply, ohm-meter etc.  Tools available on site

6 Aristotle University of Thessaloniki Alu-profile setup Custom made frame for use on the granite table

7 Aristotle University of Thessaloniki Concluding remarks Several tools available on site (old and recent purchases) Tests on the way (mesh/tension-meter recently acquired) Purchases pending – to be identified (vacuum pumps, new dial gauge meter) Readiness total score ≈ 60%

Download ppt "Aristotle University of Thessaloniki QC – QA readiness at AUTh tooling and procedures D. Sampsonidis, P. Charalampous, S. Kompogiannis, and C. Lampoudis."

Similar presentations

Alignment systems for GlueX GlueX Collaboration Meeting Bloomington, Indiana May 20-22, 2004 Courtesy of Dimos Sampsonidis, Aristotle University of Thessaloniki.

Alignment systems for GlueX GlueX Collaboration Meeting Bloomington, Indiana May 20-22, 2004 Courtesy of Dimos Sampsonidis, Aristotle University of Thessaloniki.
Takashi Matsushita Imperial College T. Matsushita 1 Station 5 status.

Takashi Matsushita Imperial College T. Matsushita 1 Station 5 status.
Status of the ATLAS MM project

Status of the ATLAS MM project
ATLAS-NSW CERN MMM workshop assembly of the module (quadruplet)

ATLAS-NSW CERN MMM workshop assembly of the module (quadruplet)
The Greek Muon Chambers (BIS) The three Greek Laboratories: 112 (90 BIS30 +22 BIS36 ) chambers University of Athens (UoA) Tube wiring/assembly (30,000.

The Greek Muon Chambers (BIS) The three Greek Laboratories: 112 (90 BIS BIS36 ) chambers University of Athens (UoA) Tube wiring/assembly (30,000.
Status Update on Mechanical Prototype in Rome November 6, 2013 1.

Status Update on Mechanical Prototype in Rome November 6,
24.7.03TRD status meeting GSI Clemens Adler TRD (Pre-)Production Status New Results/Experiences Problematic issues Production Plans Timescale.

TRD status meeting GSI Clemens Adler TRD (Pre-)Production Status New Results/Experiences Problematic issues Production Plans Timescale.
Project Report Paul Drumm CM15, FNAL June 2006. MICE Schedule Overview First beam September/October 2007 –Shutdown from January 2007 –Eight months for.

Project Report Paul Drumm CM15, FNAL June MICE Schedule Overview First beam September/October 2007 –Shutdown from January 2007 –Eight months for.
21.12.04TRD Status meeting IKFClemens Adler TRD ROC Status -Dubna -Bukarest -GSI -Frankfurt -Heidelberg.

TRD Status meeting IKFClemens Adler TRD ROC Status -Dubna -Bukarest -GSI -Frankfurt -Heidelberg.
MM mechanical prototype Work progress at CERN MicroMegas General Meeting, CERN, 5-6 November 2013 1.

MM mechanical prototype Work progress at CERN MicroMegas General Meeting, CERN, 5-6 November
QA/QC working group Working group 2014-02-20 ATLAS NSW - QA/QC working group - J. GIRAUD (20/02/2014)1.

QA/QC working group Working group ATLAS NSW - QA/QC working group - J. GIRAUD (20/02/2014)1.
Operational prototype work at CERN Status report MM Gen. Meeting, 06/11/2013 J. Wotschack1.

Operational prototype work at CERN Status report MM Gen. Meeting, 06/11/2013 J. Wotschack1.
CERN PH/DT 12/05/13 Jordan Degrange / Francisco Perez Gomez CERN PH/DT.

CERN PH/DT 12/05/13 Jordan Degrange / Francisco Perez Gomez CERN PH/DT.
CERN PH/DT 30/01/14 Francisco Perez Gomez CERN PH/DT.

CERN PH/DT 30/01/14 Francisco Perez Gomez CERN PH/DT.
MM mechanical prototype Work progress at CERN MMM Rome, 15/07/20131.

MM mechanical prototype Work progress at CERN MMM Rome, 15/07/20131.
June 8-th 2004W.Baldini1 Ferrara production center Ferrara production center Production Readiness Review OverviewOfOperations P R R.

June 8-th 2004W.Baldini1 Ferrara production center Ferrara production center Production Readiness Review OverviewOfOperations P R R.
Precision Measurement

Precision Measurement
20/04/2012Rui De Oliveira1 20/04/2012. Rui De Oliveira2 30 cm x 30 cm example.

20/04/2012Rui De Oliveira1 20/04/2012. Rui De Oliveira2 30 cm x 30 cm example.
Geometrical Measurements of the TEC Elements Goals internal survey external survey LINK calibration Means 3D CMM Cosmics Geodesy Procedure Conclusions.

Geometrical Measurements of the TEC Elements Goals internal survey external survey LINK calibration Means 3D CMM Cosmics Geodesy Procedure Conclusions.
Basic concept The NSW chambers are assemblies of Micromegas monolayers, TGC’s and spacer/stiffeners. In order to simplify the assembly procedures we propose.

Basic concept The NSW chambers are assemblies of Micromegas monolayers, TGC’s and spacer/stiffeners. In order to simplify the assembly procedures we propose.

Similar presentations

Ads by Google