1. Operating procedure for POF cables Comoss Electronic Co., Ltd. Date : May-05, 2008

2. The fixture Comoss 3 in 1 fixture is designed for POF cable assembly

3. 2. Splitting the duplicated cable for 60mm length. 1. Splitting the duplicated cable for 30mm length. Inside Cutter Function 1 : Splitting duplicated cable

4. Crimping mechanism Function 2 : Crimping connector together with cable

5. Function 3 : Cutting the excess fiber core. Cutting mechanism

6. SMI patch cord Assembly procedure : 1. Splitting the duplicated cable for 30mm 1. Push the duplicated cable onward the cutter to the further end,

7. After splitting, length 30mm

8. SMI patch cord Assembly procedure : 2. Stripping the jacket with hand tool Hand tool

9. After stripping, length 10mm

10. Comoss SMI Connector, loose piece Fixing Plate Dust cover Inner Housing Outer Housing Strain Relief (S/R)

11. SMI patch cord Assembly procedure : 3. Assemble the inner housing, outer housing & S/R. Outer Housing Strain Relief (S/R) Inner Housing

12. SMI patch cord Assembly procedure : 4. Crimping the fixing plate into inner housing. Crimping the fixing plate

13. After crimping

14. SMI patch cord Assembly procedure : 5. Cutting the excess fiber core. Cutting the fiber core

15. After cutting

16. SMI patch cord Assembly procedure : 6. Assemble the outer housing onto inner housing. Assemble the outter housing onto inner housing.

17. After assembly

18. SMI patch cord Assembly procedure : 7. Put on the dust cover. Dust cover

19. SMI patch cord