1. Subcommittee on Oil Well Cements (SC10) Wednesday June 18 th, 2014: General Meeting  Publication of API Specification 10A “Cements and Materials for Well Cementing” 24 th Edition, December 2010, is up for reaffirmation in December 2014. Auditor findings and comments are being logged, reviewed and discussed. “Special Work Session” on Thursday, June 19 th, 2014 Future revision may include changes to Consistometer oil specification and section on “Well Cementing Composites.”  Publication of API RP 10B-2 “Testing Well Cements” Publication of RP 10B-2, 2 nd Edition April 2013. Logged comments under review with discussion and possible resolution after “Special Work Session” on Thursday, June 19 rd, 2014 Future revisions may include: Stirred Fluid Loss Testing, Fluid Loss Screens and elimination of inconsistencies between API Spec 10A and RP 10B-2  ……….

2.  Rewrite of API RP 10B-3 “Testing of Deepwater Well Cement Formulations” 1 st Edition July 2004 Rewrite of RP 10B-3, 2 nd Edition Draft ballot close June 4 th, 2014. Draft comments returned for resolution June 6 th, 2014.  Rewrite of API RP 10B-4 “Preparation and Testing of Foamed Cement Slurries at Atmospheric Pressure”, 1 st Edition July 2004 Rewrite of 10B- 2 nd Edition Draft ballot close June 4 th, 2014. Draft comments returned for resolution June 6 th, 2014. Technical Report (TR) on Foam Cement Behavior under Well Conditions is the second phase of this WG Subcommittee on Oil Well Cements (SC10) Wednesday June 18, 2014: General Meeting

3.  Rewrite of API Spec 10D, 6 th Edition March 2002 “Bow Spring Casing Centralizers” Review and update API Spec 10D to include performance testing requirements for centralizers that are to be used in applications where they are run through restrictions that are smaller than the hole size in which they are to be set.  Rewrite of API RP 10F, 3 rd Edition April 2002 “Performance Testing of Cementing Float Equipment” TG will publish API Specification 10F, 1st Edition which will replace and make obsolete API RP 10F, 3th Edition. This document will include required specifications and the associated performance testing protocols for the manufacturing of Cement Float Equipment

4.  TR on “Mechanical Cementing Plugs used in Tubing, Casing and Drill Pipe” Final formatting by API is in final stage. Publication available August 2014  TR on “Mechanical Behavior of Cement” Draft edits complete July 2014. Subcommittee on Oil Well Cements (SC10) Wednesday June 18, 2014: General Meeting