1. Ready-to-Use Consumables for Laboratory Filtration Lab Products & Services Filtration Devices

2. Lab Products & Services Sartolab® 150V Vacuum Device Effective Filtration Area: 150 cm 2, pleated up to 15 L

3. Lab Products & Services Sartolab® P20 Pressure Devices Effective Filtration Area: 20 cm 2 up to 5 L

4. Lab Products & Services Sartolab® RF Vacuum Devices Effective Filtration Area: 18 – 62 cm 2 Filtration Volume: up to 1 L

5. Lab Products & Services Minisart® Syringe Filter Pressure Devices Effective Filtration Area: 0.07 – 6.2 cm 2 up to 1 L

6. Seite 6 Main Application: Clarification Prior to Analytics  no ghosts peaks  clean and fast Minisart® for Solvents and Aqueous Liquids Chemically Inert Polypropylene (PP) Housing Lab Products & Services

7. Seite 7 Minisart® RC Regenerated Cellulose (RC) Perfectly suitable for all hydrophilic samples Cleanest naturally hydrophilic membrane Available in three sizes Can exchange any other hydrophilic membrane material used for sample preparation of solvents and aqueous solutions with pH range of 3 - 14 25 mm 15 mm 4 mm

8. Seite 8 Minisart® NY Polyamide (PA = NY) Perfectly suitable for all hydrophilic samples Available in two sizes Available with glass fiber pre-filter Can exchange any other hydrophilic membrane material used for sample preparation of solvents and aqueous solutions with pH range of 3 - 14 25 mm 15 mm

9. Seite 9 Minisart® SRP Polytetrafluoroethylene (PTFE) Pure PTFE for highest solvent resistance Hydrophobic Available in three sizes Available with male spike outlet Can exchange any other hydrophobic membrane material used for sample preparation of solvents and harsh acids and bases with pH range of 1 - 14 male spike 25 mm 15 mm 4 mm

10. Seite 10 Lab Products & Services Minisart® for Aqueous Solutions Biocompatible MBS Housing Suitbale for Medical Usage Main Application: Sterile Filtration and Clarification  reliable removal of microorganisms  no leachables or extractables  safe and fast

11. Seite 11 Minisart® High Flow (HF) 0.1 0.2 0.45 Polyethersulfone (PES) Perfectly suitable for cell culture additives Assymetric PES membrane for fastest flow 0.1 µm for removal of Mycoplasma Can exchange any other hydrophilic membrane material used for clarification or sterilization of aqueous solutions like additives and buffers with pH range from 1 - 14 Lab Products & Services

12. Seite 12 Minisart® NML 0.2 0.45 0.65 0.8 1.2 5.0 Surfactant-Free Cellulose Acetate (SFCA) Perfectly suitable for all aqueous filtrations CE certified products available Surfactant-free Available in many different pore sizes Can exchange any other hydrophilic membrane material used for clarification or sterilization of aqueous solutions like medical drugs Lab Products & Services

13. Seite 13 Minisart® NML and HF offer the biggest effective filtration area for highest flow rates 28 mm EFA 33 mm housing diameter Lab Products & Services

14. Seite 14 Lab Products & Services Minisart® for Venting of Air and Gases Main Application: Venting and Aerosol Protection  proven barrier against germs  glueable MBS housing  autoclavable PP housing

15. Seite 15 Polytetrafluoroethylene (PTFE) Gluable MBS housing material Autoclavable PP versions Hydrophobic membrane Available in CE certified versions Can exchange any other hydrophobic membrane material for venting of containers, fermentors, bags, etc. Minisart® Air* Minisart® HY Minisart® SRP Lab Products & Services *Minisart® Air can be sterilized by Gamma irradiation according to the following parameters: Range 25 – 40 kGy (validated with 50 kGy)

16. Seite 16 Comprehensive Minisart® Portfolio Filters for aqueous liquids Filters for solvents and harsh solutions Filters for venting

17. Page 14 Lab Products & Services Thank you for Your Attention!