Presentation is loading. Please wait.

Presentation is loading. Please wait.

GIGATRACKER SUPPORTING PLATE COOLING SYSTEM SIMULATION 1Vittore Carassiti - INFN FECERN, 11/12/2007.

Published byElvin Owen Modified over 9 years ago

Similar presentations

Presentation on theme: "GIGATRACKER SUPPORTING PLATE COOLING SYSTEM SIMULATION 1Vittore Carassiti - INFN FECERN, 11/12/2007."— Presentation transcript:

1 GIGATRACKER SUPPORTING PLATE COOLING SYSTEM SIMULATION 1Vittore Carassiti - INFN FECERN, 11/12/2007

2 BOUNDARY CONDITIONS SUPPORTING PLATE THICKNESS SPT = 0,1 mm SURFACE COLLECTING THE POWER SCP = 27 x60 mm^2 HEAT FLUX HF = 2 W/cm^2 = 2E+04 W/m^2 COOLING SYSTEM SURROUNDING THE RECTANGULAR EDGE OF THE SURFACE COLLECTING THE POWER Vittore Carassiti - INFN FE2CERN, 11/12/2007 Cooling system Supporting plate Heat flux

3 MESH 1° ANALISYS : ELEMENT LENGTH = 6 mm 2° ANALISYS : ELEMENT LENGTH = 4 mm 3° ANALISYS : ELEMENT LENGTH = 2 mm Vittore Carassiti - INFN FE3 COMPARED ANALISYS CERN, 11/12/2007

4 K-1100 CARBON FIBER - DATA SHEET LONGITUDINAL THERMAL CONDUCTIVITY (W/mK)1000 TRANSVERSE THERMAL CONDUCTIVITY (W/mK)2,4 ELECTRICAL RESISTIVITY (micro-ohm/m)1,3 FIBER DIAMETER (microns)10 DENSITY (Kg/m^3)2200 LONGITUDINAL MODULUS (Gpa)931 TRANSVERSE MODULUS (Gpa)0,7 LONGITUDINAL POISSON’S0,3 TRANSVERSE POISSON’S0,85 LONGOTUDINAL CTE @ 21°C (C^-1)-1,5E-06 TRANSVERSE CTE @ 21°C (C^-1)12E-06 LONGITUDINAL STRENGTH (Gpa)3,10 SHEAR STRENGTH (Mpa)21 Vittore Carassiti - INFN FE4CERN, 11/12/2007

5 K1100 CARBON FIBER SUPPORTING PLATE CONFIGURATION 1 – TEMPERATURE DISTRIBUTION Vittore Carassiti - INFN FE5 MAX THERMAL CONDUCTIVITY CERN, 11/12/2007

6 K1100 CARBON FIBER SUPPORTING PLATE CONFIGURATION 2 – TEMPERATURE DISTRIBUTION Vittore Carassiti - INFN FE6 MAX THERMAL CONDUCTIVITY CERN, 11/12/2007

7 K1100 CARBON FIBER SUPPORTING PLATE CONFIGURATION 3 – TEMPERATURE DISTRIBUTION Vittore Carassiti - INFN FE7 MAX THERMAL CONDUCTIVITY CERN, 11/12/2007

8 Vittore Carassiti - INFN FE8 GOLDSILICONALUMINUM ISOTROPIC MATERIAL BEHAVIOUR CERN, 11/12/2007

9 K1100 CARBON FIBER SUPPORTING PLATE THERMAL LOAD IMPACT VS STRESS – STRAIN DISTRIBUTION Vittore Carassiti - INFN FE9CERN, 11/12/2007

10 K1100 CARBON FIBER SUPPORTING PLATE DISPLACEMENT (m) 4 CORNERS CLAMPED @ TEMPERATURE DISTRIBUTION = CONFIGURATION 2 Vittore Carassiti - INFN FE10CERN, 11/12/2007

11 K1100 CARBON FIBER SUPPORTING PLATE DISPLACEMENT (m) 2 CORNERS CLAMPED AND 2 CORNERS SLIDING @ TEMPERATURE DISTRIBUTION = CONFIGURATION 2 Vittore Carassiti - INFN FE11CERN, 11/12/2007

12 K1100 CARBON FIBER SUPPORTING PLATE DISPLACEMENT (m) VERTICAL EDGES CLAMPED @ TEMPERATURE DISTRIBUTION = CONFIGURATION 2 Vittore Carassiti - INFN FE12CERN, 11/12/2007

13 K1100 CARBON FIBER SUPPORTING PLATE DISPLACEMENT (m) HORIZONTAL EDGES CLAMPED @ TEMPERATURE DISTRIBUTION = CONFIGURATION 2 Vittore Carassiti - INFN FE13CERN, 11/12/2007

14 K1100 CARBON FIBER SUPPORTING PLATE DISPLACEMENT (m) HORIZONTAL EDGES CENTER CLAMPED @ TEMPERATURE DISTRIBUTION = CONFIGURATION 2 Vittore Carassiti - INFN FE14CERN, 11/12/2007

15 Vittore Carassiti - INFN FE15 CONFIGURATIONMAX DISPLACEMENT (m)MAX STRESS (Pa) 4 CORNES CLAMPED4,18E-067E+07 2 CORNERS CLAMPED 2 CORNERS SLIDING 1,64E-055,84E+07 VERTICAL EDGES CLAMPED1,79E-033,23E+07 HORIZONTAL EDGES CLAMPED1,43E-043,86E+07 HORIZONTAL EDGES CENTER CLAMPED 7,55E-067E+07 STRESS – STRAIN COMPARISON TABLE CERN, 11/12/2007

Download ppt "GIGATRACKER SUPPORTING PLATE COOLING SYSTEM SIMULATION 1Vittore Carassiti - INFN FECERN, 11/12/2007."

Similar presentations

Wrap up of the thermal and thermo mechanical simulation on the IBL stave Simone Coelli Mauro Monti INFN Milano ATLAS PIXEL Inserted B-Layer Eng. Meeting.

Wrap up of the thermal and thermo mechanical simulation on the IBL stave Simone Coelli Mauro Monti INFN Milano ATLAS PIXEL Inserted B-Layer Eng. Meeting.
Workshop at Indian Institute of Science 9-13 August, 2010 Bangalore India Fire Safety Engineering & Structures in Fire Organisers:CS Manohar and Ananth.

Workshop at Indian Institute of Science 9-13 August, 2010 Bangalore India Fire Safety Engineering & Structures in Fire Organisers:CS Manohar and Ananth.
Application of Steady-State Heat Transfer

Application of Steady-State Heat Transfer
NA62 SILICON PIXELS DETECTOR COOLING VESSEL PROTOTYPE STATUS REPORT COOLING VESSEL PROTOTYPE STATUS REPORT 1Vittore Carassiti - INFN FECERN, 26/10/2009.

NA62 SILICON PIXELS DETECTOR COOLING VESSEL PROTOTYPE STATUS REPORT COOLING VESSEL PROTOTYPE STATUS REPORT 1Vittore Carassiti - INFN FECERN, 26/10/2009.
ME 450 Group Adrian Conrad Chris Cook Thomas Hylton Nathan Wagers High Pressure Water Fixture Conceptual Design Analysis December 10, 2007.

ME 450 Group Adrian Conrad Chris Cook Thomas Hylton Nathan Wagers High Pressure Water Fixture Conceptual Design Analysis December 10, 2007.
Exp.4: Rubber in Shear Apparatus Eng. Ahmed Y Manama Eng. Saeed A Shurab Eng. Ahmed Al Afeefy.

Exp.4: Rubber in Shear Apparatus Eng. Ahmed Y Manama Eng. Saeed A Shurab Eng. Ahmed Al Afeefy.
Prediction of Load-Displacement Curve for Weld-Bonded Stainless Steel Using Finite Element Method Essam Al-Bahkali Jonny Herwan Department of Mechanical.

Prediction of Load-Displacement Curve for Weld-Bonded Stainless Steel Using Finite Element Method Essam Al-Bahkali Jonny Herwan Department of Mechanical.
R.Valbuena NBI 14-19 March 2002 CNGS Decay Pipe Entrance Window Structural and Thermal Analysis A.Benechet, P.Cupial, R.Valbuena CERN-EST-ME.

R.Valbuena NBI March 2002 CNGS Decay Pipe Entrance Window Structural and Thermal Analysis A.Benechet, P.Cupial, R.Valbuena CERN-EST-ME.
September 24-25, 2003 HAPL Program Meeting, UW, Madison 1 Report on Target Action Items A.R. Raffray and B. Christensen University of California, San Diego.

September 24-25, 2003 HAPL Program Meeting, UW, Madison 1 Report on Target Action Items A.R. Raffray and B. Christensen University of California, San Diego.
The Layup of the Multi-chip Module Note: Assuming all two glues are of silicone type.

The Layup of the Multi-chip Module Note: Assuming all two glues are of silicone type.
First Wall Thermal Hydraulics Analysis El-Sayed Mogahed Fusion Technology Institute The University of Wisconsin With input from S. Malang, M. Sawan, I.

First Wall Thermal Hydraulics Analysis El-Sayed Mogahed Fusion Technology Institute The University of Wisconsin With input from S. Malang, M. Sawan, I.
Identified Company (CompositeX) to manufacture Custom Composite Pressure Vessel ● Working pressure 1000psi ● Holds 8 kg Nitrous Oxide ● 700 cubic inch.

Identified Company (CompositeX) to manufacture Custom Composite Pressure Vessel ● Working pressure 1000psi ● Holds 8 kg Nitrous Oxide ● 700 cubic inch.
Shell Elements Jake Blanchard Spring 2008. Shell (or plate) Elements These are typically “planar” elements They are used to model thin structures which.

Shell Elements Jake Blanchard Spring Shell (or plate) Elements These are typically “planar” elements They are used to model thin structures which.
Strength of Material Shear Strain Dr. Attaullah Shah.

Strength of Material Shear Strain Dr. Attaullah Shah.
Feasibility Analysis h T1 T2 T3 T4 T5 One Dimensional Transient Analysis One Dimensional Finite Difference Steady State Analysis T1 and T5 will be known.

Feasibility Analysis h T1 T2 T3 T4 T5 One Dimensional Transient Analysis One Dimensional Finite Difference Steady State Analysis T1 and T5 will be known.
Design of Recuperative Heat Exchanger Presented by -- Jinying Zhu.

Design of Recuperative Heat Exchanger Presented by -- Jinying Zhu.
PAX DETECTOR THERMAL SIMULATION 1Vittore Carassiti - INFN FEFz-Juelich, 27/10/2008.

PAX DETECTOR THERMAL SIMULATION 1Vittore Carassiti - INFN FEFz-Juelich, 27/10/2008.
RF-Accelerating Structure: Cooling Circuit Modeling Riku Raatikainen 16.8.2010.

RF-Accelerating Structure: Cooling Circuit Modeling Riku Raatikainen
Project M.E.T.E.O.R. P07109: Flying Rocket Team Andrew Scarlata, Geoff Cassell, Zack Mott, Garett Pickett, Brian Whitbeck, Luke Cadin, David Hall.

Project M.E.T.E.O.R. P07109: Flying Rocket Team Andrew Scarlata, Geoff Cassell, Zack Mott, Garett Pickett, Brian Whitbeck, Luke Cadin, David Hall.
I T i womiller VG1 Meeting UCSC November 10, 2005 ATLAS Upgrade Workshop Silicon Tracker Stave Mechanical Issues.

I T i womiller VG1 Meeting UCSC November 10, 2005 ATLAS Upgrade Workshop Silicon Tracker Stave Mechanical Issues.

Similar presentations

Ads by Google