Presentation is loading. Please wait.

Presentation is loading. Please wait.

NA62 SILICON PIXELS DETECTOR COOLING VESSEL PROTOTYPE STATUS REPORT COOLING VESSEL PROTOTYPE STATUS REPORT 1Vittore Carassiti - INFN FECERN, 26/10/2009.

Published byTreyton Beaston Modified over 9 years ago

Similar presentations

Presentation on theme: "NA62 SILICON PIXELS DETECTOR COOLING VESSEL PROTOTYPE STATUS REPORT COOLING VESSEL PROTOTYPE STATUS REPORT 1Vittore Carassiti - INFN FECERN, 26/10/2009."— Presentation transcript:

1 NA62 SILICON PIXELS DETECTOR COOLING VESSEL PROTOTYPE STATUS REPORT COOLING VESSEL PROTOTYPE STATUS REPORT 1Vittore Carassiti - INFN FECERN, 26/10/2009

2 Vittore Carassiti - INFN FE2CERN, 26/10/2009 PARTS MATERIAL PARTMATERIAL PCBGLASS FIBER VESSEL WALLKAPTON TYPE H VESSEL FRAMEALUMINUM RESINEPOXY (ARALDITE 2012) MATERIALS

3 Vittore Carassiti - INFN FE3CERN, 26/10/2009 MATERIAL PROPERTIES MATERIALDENSITY (Kg/m^3) THERMAL CONDUCTIVITY (W/mK) CTE (K^-1) ELASTIC MODULUS (Pa) POISSON’S RATIO TENSILE STRENGTH (Pa) GLASS FIBER20760,836,7E-0645E+090,2848E+06 KAPTON TYPE H14200,1645E-062,5E+090,34230E+06 ALUMINUM270023723,5E-0670,6E+090,345120E+06 EPOXY (ARALDITE 2012) 11800,2230E-062,5E+090,3460E+06 MATERIALS

4 Vittore Carassiti - INFN FE4CERN, 26/10/2009 MAKING THE PARTS THE ALL PARTS MADE BY FERRARA WORKSHOP

5 Vittore Carassiti - INFN FE5CERN, 26/10/2009 TESTS @ ROOM TEMPERATURE THE FOLLOWING TESTS HAVE BEEN DONE :  KAPTON CREEP  KAPTON FAILURE PRESSURE KAPTON-RESIN-ALUMINUM  QUALITY OF THE JOINT KAPTON-RESIN-ALUMINUM

6 Vittore Carassiti - INFN FE6CERN, 26/10/2009 BONDING ALUMINUM FRAME & KAPTON FOIL PREPARATION OF THE JOINTS : ALUMINUM JOINT ABRADED AND DEGREASED KAPTON JOINT LIGHTLY ABRADED AND DEGREASED CURING TIME : 16 h @ 40°C

7 Vittore Carassiti - INFN FE7CERN, 26/10/2009 BONDING ALUMINUM FRAME & KAPTON FOIL

8 Vittore Carassiti - INFN FE8CERN, 26/10/2009 KAPTON CREEP TEST Working pressure Wp = 1 bar Test pressure Tp = 2Wp = 2 bar AFTER TWO WEEKS @ Tp NO EVIDENCE OF CREEP SMALL RESIDUAL DEFORMATION AFTER VENTING

9 Vittore Carassiti - INFN FE9CERN, 26/10/2009 KAPTON FAILURE PRESSURE STRESS ON THE VESSELBOUNDARY CONDITIONS Pi = 0,1 Mpa (inner pressure) Pe = 0 (outher pressure) s = 5E-05 m (wall thickness) Di = 47E-03 m (inner diameter) EQUIVALENT TENSILE STRESS (Guest criterion) FAILURE PRESSURE CALCULATION

10 Vittore Carassiti - INFN FE10CERN, 26/10/2009 KAPTON FAILURE PRESSURE TEST FAILURE PRESSURE = 5 bar ACCORDING TO CALCULATION

11 Vittore Carassiti - INFN FE11CERN, 26/10/2009 JOINT KAPTON-RESIN-ALUMINUM LENGTH OF THE OVERLAP CALCULATION

12 Vittore Carassiti - INFN FE12CERN, 26/10/2009 JOINT KAPTON-RESIN-ALUMINUM THE JOINT AFTER KAPTON FAILURE

13 Vittore Carassiti - INFN FE13CERN, 26/10/2009 COOLING VESSEL THE COOLING VESSEL @ 1,5 bar

14 Vittore Carassiti - INFN FE14CERN, 26/10/2009 THE POWER OF THE DETECTOR 16 RESISTORS 222 Ω – 2W 3 THERMOCOUPLES K TYPE (from -50°C to +250°C)

15 Vittore Carassiti - INFN FE15CERN, 26/10/2009 THE ASSEMBLY

16 Vittore Carassiti - INFN FE16CERN, 26/10/2009 NEXT STEP : CECKING THE COOLING IN VACUUM DN 160 CF FLANGE ELECTRICAL CONNECTIONS & POWER SUPPLY NITROGEN IN-OUT COOLING VESSEL

17 Vittore Carassiti - INFN FE17CERN, 26/10/2009 ACKNOLEDGEMENTS COTTA ANGELO (electronic service) EVANGELISTI FEDERICO (mechanical service) LANDI LUCA (mechanical service) PADOAN CLAUDIO (electronic service) STATERA MARCO (mechanical service) SPECIAL THANKS TO :

Download ppt "NA62 SILICON PIXELS DETECTOR COOLING VESSEL PROTOTYPE STATUS REPORT COOLING VESSEL PROTOTYPE STATUS REPORT 1Vittore Carassiti - INFN FECERN, 26/10/2009."

Similar presentations

Manchester 09/sept/2008A.Falou & P.Cornebise {LAL-Orsay}1 CALICE Meeting/ Manchester Sept 2008 SLAB Integration & Thermal Measurements.

Manchester 09/sept/2008A.Falou & P.Cornebise {LAL-Orsay}1 CALICE Meeting/ Manchester Sept 2008 SLAB Integration & Thermal Measurements.
Manufacturing Technology

Manufacturing Technology
for a neutrinos factory

for a neutrinos factory
By: Matt Luedeman, Peter Wells, Chris Dyke Advisor: Jay McCormack Clients: Dr. Karl Rink Dr. Akira Tokuhiro 1.

By: Matt Luedeman, Peter Wells, Chris Dyke Advisor: Jay McCormack Clients: Dr. Karl Rink Dr. Akira Tokuhiro 1.
Identified Company (CompositeX) to manufacture Custom Composite Pressure Vessel ● Working pressure 1000psi ● Holds 8 kg Nitrous Oxide ● 700 cubic inch.

Identified Company (CompositeX) to manufacture Custom Composite Pressure Vessel ● Working pressure 1000psi ● Holds 8 kg Nitrous Oxide ● 700 cubic inch.
Tube to Foam Interface (Tim). Outline Discuss what’s known about the tube to foam interface – Describe problem – Issues – Theoretical Calculations – Anecdotal.

Tube to Foam Interface (Tim). Outline Discuss what’s known about the tube to foam interface – Describe problem – Issues – Theoretical Calculations – Anecdotal.
Strength of Material Shear Strain Dr. Attaullah Shah.

Strength of Material Shear Strain Dr. Attaullah Shah.
Design of Recuperative Heat Exchanger Presented by -- Jinying Zhu.

Design of Recuperative Heat Exchanger Presented by -- Jinying Zhu.
PAX DETECTOR THERMAL SIMULATION 1Vittore Carassiti - INFN FEFz-Juelich, 27/10/2008.

PAX DETECTOR THERMAL SIMULATION 1Vittore Carassiti - INFN FEFz-Juelich, 27/10/2008.
R&D Status and Plan on The Cryostat N. Ohuchi, K. Tsuchiya, A. Terashima, H. Hisamatsu, M. Masuzawa, T. Okamura, H. Hayano 1.STF-Cryostat Design 2.Construction.

R&D Status and Plan on The Cryostat N. Ohuchi, K. Tsuchiya, A. Terashima, H. Hisamatsu, M. Masuzawa, T. Okamura, H. Hayano 1.STF-Cryostat Design 2.Construction.
Dec. 4, 2001 CERN-1 Hans de Vries VELO Mechanics  RF/vacuum foil  Rectangular bellow  Wake field suppressors  Cabling Summary & Outlook VELO mechanical.

Dec. 4, 2001 CERN-1 Hans de Vries VELO Mechanics  RF/vacuum foil  Rectangular bellow  Wake field suppressors  Cabling Summary & Outlook VELO mechanical.
1 EUROnu design System target + horn First thermal calculations on the target made of aluminium G. Gaudiot 02/06/2010 Strasbourg.

1 EUROnu design System target + horn First thermal calculations on the target made of aluminium G. Gaudiot 02/06/2010 Strasbourg.
Forging new generations of engineers. Properties of Materials.

Forging new generations of engineers. Properties of Materials.
U.S. DOT ANALYSIS OF COMPOSITE HYDROGEN STORAGE CYLINDERS UNDER TRANSIENT THERMAL LOADS J. Hu, S. Sundararaman and K. Chandrashekhara Department of Mechanical.

U.S. DOT ANALYSIS OF COMPOSITE HYDROGEN STORAGE CYLINDERS UNDER TRANSIENT THERMAL LOADS J. Hu, S. Sundararaman and K. Chandrashekhara Department of Mechanical.
November 16, 2001 C. Newsom BTeV Pixel Modeling, Prototyping and Testing C. Newsom University of Iowa.

November 16, 2001 C. Newsom BTeV Pixel Modeling, Prototyping and Testing C. Newsom University of Iowa.
Poisson’s Ratio For a slender bar subjected to axial loading:

Poisson’s Ratio For a slender bar subjected to axial loading:
ATLAS Pixel Detector July 2001 Cooling Services Connections N. Hartman LBNL Cooling Connections Status Report October 11, 2001 N. Hartman, E. Anderssen,

ATLAS Pixel Detector July 2001 Cooling Services Connections N. Hartman LBNL Cooling Connections Status Report October 11, 2001 N. Hartman, E. Anderssen,
STATUS OF THE MEG CRYOSTAT Construction status Schedule ____________________________________________________________ 04/Agust/06 F. Raffaelli, L. Delfrate.

STATUS OF THE MEG CRYOSTAT Construction status Schedule ____________________________________________________________ 04/Agust/06 F. Raffaelli, L. Delfrate.
BTeV Pixel Detector Laurie Ramroth Fermi National Laboratory Under the direction of: Jim Fast.

BTeV Pixel Detector Laurie Ramroth Fermi National Laboratory Under the direction of: Jim Fast.
Tbilisi, 10/07/2014V. Carassiti, P. Lenisa 1. Tbilisi, 10/07/2014V. Carassiti, P. Lenisa2.

Tbilisi, 10/07/2014V. Carassiti, P. Lenisa 1. Tbilisi, 10/07/2014V. Carassiti, P. Lenisa2.

Similar presentations

Ads by Google