1. Presenters: Genady Paikin, Ariel Tsror. Supervisors : Inna Rivkin, Rolf Hilgendorf. High Speed Digital Systems Lab Yearly Project Part A

2. Agenda : Project overview Goals Hardware Learning Process Sampling stage CTF module DSP module SCD module Learning LabView Adjusting Xlinx Chipscope to NI's FlexRio DSP module Formation Gantt Chart

3. Project Overview The project is part of the Sub-Nyquist sampling and reconstruction card. Our goal is to implement 2 units – CTF & DSP, on FlexRio FPGA cards under NI LabView environment. The unit also includes the Xampling sampling card And the Expand unit.

4. Goals : Main goal – implementing CTF & DSP on FPGA’s under NI LabView environment using VHDL, Full integration, running full system at real time.

5. Hardware : NI chassis with 4* FlexRio FPGA modules ◦ FlexRio :  Model : NI PXIe 7965R  Bus : PXI Express  FPGA : Virtex-5 SX95T (Xilinx)  FPGA memory : 8,784 Kbits  Onboard Memory : 512MB  FPGA Slices : 14,720  FPGA DSP Slices : 640 A/D. Xampling sampling card. * Expand, DSP, CTF, Reconstruction

6. Learning Process : Learning process composed of 2 independent processes : ◦ Algorithm :  System main concept.  Sampling stage (Xampling and Expand).  CTF module.  DSP module (inc. SCD). ◦ LabView :  LabView main concepts.  FPGA under LabView.  Integration.  Implementing Basic unit as training.

7. High Level Architecture : Xampling

8. NI Chassis FlexRio – Expand FlexRio – CTF FlexRio – DSP+SCD FlexRio – Analog Back-End 4 X A/D Signal Generator MWC / Xamping Host PXIe LVDS 300 MB/s

9. Sampling stage : The sampling stage contain two units ◦ Xampling sampling card. ◦ Expand. Expand 1:3 Analog in 4X62.5 Mhz digital 12X20.8 Mhz digital A/D 62.5 Mhz (250 1:4 decim.) Xampling

10. CTF module : Task : Detects the Support of x(t) and forward it to DSP unit. Triggered at : ◦ Initiation. ◦ SCD interrupt. The unit based on OMP (Orthogonal Matching Pursuit) algorithm.

11. Block Diagram : A Q frame calculation MP y[n] A Supp

12. DSP module : Task: Reconstructs the signal from the samples. The unit receives the samples from the memory (latency fifo), matrix A from the memory, and signal support from the CTF unit. The support and samples are coordinated by the latency fifo. The unit performs pseudo-inverse of matrix A (calculates As) using the signal support, that is received from the CTF. The inverse is done by QR Decomposition algorithm. Finally the unit multiply the delayed signal with matrix As.

13. DSP module : DSP Pseudo Inverse Multiplication As +

14. SCD module : Task: Detects if there is a change of the signal support. The unit uses the signal energy to decide if the CTF needs to recalculate the signal support. Support Change Detector

15. Learning LabView : Basic level ◦ We ran a simple application using LabView basic tools. VHDL in LabView ◦ We added a simple VHDL component using IP integration node. ◦ We added a simple VHDL component using Component-Level IP (FPGA Module). We used "host VI" to open "target VI“ We used FPGA methods from the host.

16. Adjusting Xlinx Chipscope to NI's FlexRio:

17. We created chipscope component using Xilinx core generator (ILA, ICON). We generated CLIP+xml file using CLIP node xml generator. We defined chipscope component as CLIP node. We connected manually JTAG cable to fit NI 5781 digital outputs/inputs (PFI).

18. Adjusting Xlinx Chipscope to NI's FlexRio: We connected the chipscope component with the basic VHDL component that we had created earlier on FPGA target. We connected the required outputs/inputs of the chipscope component with the PFIs.

19. Adjusting Xlinx Chipscope to NI's FlexRio: Problems: ◦ We tried to run whole things together, however the chipscope analyzer couldn't recognize the device. ◦ There are no tutorials on this theme except the one we used, and it isn’t compatible with Xilinx or LabView versions that exist in the lab. Ways to solve it: ◦ We wait for official answer from NI.

20. Adjusting Xlinx Chipscope to NI's FlexRio: Target VI Implementation IP integration node Component Level IP (CLIP)

21. Adjusting Xlinx Chipscope to NI's FlexRio: Host VI Implementation

22. Multi-Clock Domain: Creating example with different clock rates in the same design.

23. DSP module Formation: Steps: ◦ Learning previous implementation. ◦ Coding blocks with VHDL. ◦ Creating needed blocks in COREGEN. ◦ Debugging blocks with Model Sim. ◦ Importing VHDL components into LabView. ◦ Assembling the whole module in LabView. ◦ Debugging the module on the FPGA.

24. Gantt :