1. System Calibration Fernando Rodriguez-Morales August 7 th, 2007

2. 2 of 9 Outline Overview Network analyzer measurements –Calibrated delay –Antennas Delay-line response Other measurements

3. 3 of 9 Calibration overview –Transmitter/receiver transfer function is determined –Antenna response is determined. Calibration is used to remove systematic errors from the measured data. Calibrated delay

4. 4 of 9 Network Analyzer Measurements Used to determine the transfer function of a calibrated delay. S-parameter files are downloaded and stored in a computer. Phase and amplitude information available.

5. 5 of 9 Network Analyzer Measurements The VNA is also used to determine the transmission coefficient of the antennas (from the reflection coefficient). Computer Left antennas Right antennas

6. 6 of 9 Delay line measurements Performed to compensate for amplitude and phase differences in the system. Transmit/record waveforms for different bandwidths and pulse durations. System response (including power amplifiers) can be determined.

7. 7 of 9 Delay line measurements Delay line setup Sample waveforms

8. 8 of 9 Other Measurements Fly over the ocean (or smooth surface) to collect data over a distance of 10-20 km. Roll measurements to determine antenna patterns.

9. 9 of 9