1. Trap Components Pheromone secured With paperclip
Universal Bucket/ Green Bucket Trap
Trap Components
Bucket
Top
Pheromone Holder
Pheromone secured
With paperclip
String for
hanging
Cover

2. Partially assembled, showing placement of pheromone holder
Fully assembled

3. Wing Trap Components Trap Components Top
Consider labeling the pest trapped and dating it – may help remind you when to change the lure
Wire Hanger
Bottom, folded
Lay pheromone flat on the glue
Fold bottom to pucker at creases

4. Trap Components Insert pheromone in slot, and screw on lid
Slots for pheromone
Remove foil backing
Japanese Beetle Trap

5. Texas Cone Trap
The trap top sits on top of the big cone and should be secured using a wire flag.
When emptying the trap, have a piece of paper or something to insert in the bottom of the trap or else moths will escape.
Pheromone is placed in the center of the big hoop. If the clip has broken off, you can use a binder clip that has been fastened with baling wire to the metal supports of the big cone.