1. Procedure Editor

2. 2 16.11.2015 16:17 This SOP describes the Setting procedure and order folders. How to load procedures in order files for sources and destinations. The definition of dilutor solvents used. The differences between “Bruker” and “Custom” procedures. How to add and edit procedures and sub-procedures. Introduction

3. Procedure Editor 3 16.11.2015 16:17 This button is used to change the procedure export directory path. Check the correct procedure export path. The directory contains all procedures for the “Create order dialog“ window. Edit Settings

4. Procedure Editor 4 16.11.2015 16:17 Open the procedure editor dialog The procedures can be defined here and will be used later to set up orders within the following applications: PrepGilsonST “Create order dialog“ SampleTrack Procedure Editor Dialogue

5. Procedure Editor 5 16.11.2015 16:17 Procedures defined and saved here… … can be selected later in the “Create order dialog“. 1a. Using Procedure in Order files

6. Procedure Editor 6 16.11.2015 16:17 Placeholder variables for SOURCE Samples defined here… … can be selected later when setting up orders in the “Create order dialog“. 1b. Using Procedure in Order files: Source

7. Procedure Editor 7 16.11.2015 16:17 Dispenses defined here… (the DESTINATION position variable in the Order file will be used!) … can be selected later when setting up orders in the “Create order dialog“. 1c. Using Procedure in Order files: Destination

8. Procedure Editor 8 16.11.2015 16:17 Placeholder variable for a Dilutor/ValveMate solvent defined here… (selection „##$SOLVENT Variable in Order “) … can be selected later in the “Create order dialog“. 1d. Using Procedure in Order files: Dilutor Solvent

9. Procedure Editor 9 16.11.2015 16:17 Procedures of the type “Bruker“ cannot be saved. The “Save“ button is gray. Save the procedure with the button “Save As“ and use a different personalised name like “my procedure“. Open the “Saved as“ procedure. It has the custom symbol and can be modified and saved. 2. Procedure Difference: “Bruker“ / “Custom“

10. Procedure Editor 10 16.11.2015 16:17 After opening the new procedure it will be displayed as a “Custom“ procedure. 2a. View a “Custom“ Procedure

11. Procedure Editor 11 16.11.2015 16:17 Use this button to load procedures (only for procedures of type “ADD“) 2b. Open Procedure

12. Procedure Editor 12 16.11.2015 16:17 Click on the “Source Type“ of any line to select it and show all values in the line edit area. 3. Show Procedure Values

13. Procedure Editor 13 16.11.2015 16:17 2. Press the button “Update“ to set the new values in the selected line. 1.Enter the parameters for the solvent at the Dilutor / ValveMate. 4a. Edit the Source Type “Solvent at Dilutor“

14. Procedure Editor 14 16.11.2015 16:17 4a. Edit the Source Type “Solvent at Dilutor“ Select the solvent name from the list. Tip: For each solvent name in the list the position on the ValveMate is predefined in the configuration.

15. Procedure Editor 15 16.11.2015 16:17 2. Press the “Update“ button to set the new values in the selected line. 1. Enter the gas gap parameters. 4b. Edit the Source Type „Gas Gap“

16. Procedure Editor 16 16.11.2015 16:17 2. Press the “Update“ button to set the new values in the selected line. 1.Enter the sample parameters ( = Source in the order file). 4c. Edit the Source Type “Sample“

17. Procedure Editor 17 16.11.2015 16:17 2. Press the “Update“ button to set the new values in the selected line. 1.Enter the parameters for the tray solvent. 4d. Edit the Source Type “Solvent in Tray“

18. Procedure Editor 18 16.11.2015 16:17 Select the solvent name from the list. Tip: For each solvent name in the list the position in the tray is predefined in the configuration. 4d. Edit the Source Type “Solvent in Tray“

19. Procedure Editor 19 16.11.2015 16:17 1. Check the type of subprocedure. 2.Select the name of the subprocedure (all files of subdirectory...\Disp\ are listed ). 5. Adding Subprocedures to a Line

20. Procedure Editor 20 16.11.2015 16:17 A procedure with the type “Dispense“ will be opened. 5a. Editing a Subprocedure Type “Disp“

21. Procedure Editor 21 16.11.2015 16:17 A procedure with the type “Mix“ is opened. 5b. Editing a Subprocedure Type “Mix“

22. Procedure Editor 22 16.11.2015 16:17 A procedure with the type “Clean“ is opened (Save as a Custom procedure to edit). 5c. Editing a Subprocedure Type “Clean“

23. Procedure Editor 23 16.11.2015 16:17 1. Select a line from the list. 2. Modify the values as required. 3. Use the “Add below“ button to insert a copy of the current line. 6. Adding Lines

24. Procedure Editor 24 16.11.2015 16:17 5. Press the “Paste below“ button. 1. Select a source line from the list. 2. Modify the values as required. 3. Use the “Copy“ button to copy the current value area. 4. Select a location to paste the new data. 7. Copying and Pasting Lines

25. Procedure Editor 25 16.11.2015 16:17 Use the “Delete“ button to remove the selected line from the list. 8. Deleting Lines

26. Procedure Editor 26 16.11.2015 16:17