1. © 2012 Autodesk LF5363 - BIM in Manufacturing Crossing the Wall Between Product and Building Workflows Tim Bourdois Aluminum Curtainwall Systems / Netwise

2. © 2012 Autodesk Tim Bourdois, Aluminum Curtainwall Systems / Netwise Computer Services Tim has worked with Aluminum Curtainwall Systems since 2002 as an IT systems engineer and is currently their director for technology and development. He is responsible for all things IT at ACS including analysis and implementation of Autodesk® products, their integration into the organizational workflow and the integration of output data into their ERP system. He is involved with system design, software/hardware selection and acquisition, implementation, training, and cross application development; acting as a facilitator between application vendors. His current focus at ACS is the implementation and integration of ERP & Project Management/PLM within the organization. Tim has spoken at several Autodesk events including the 2008 Design Computation Symposium, Autodesk Tech Days & the Manufacturing Application Engineering Summit. Tim has maintained a small IT consulting company since 1994 (NetWise Computer Services) and specializes in system design & integration. He became a certified network specialist in 1986 and a certified NetWare Engineer in 1996 through Novell Inc.

3. © 2012 Autodesk Class Summary  Building Information Modeling (BIM) is an established and successful approach in architecture, engineering, and construction, but how does that include the manufacturing industry? There are many common communication vehicles for architecture and construction, but what about manufacturing? How do we include the manufacturing community in the collaboration cycle to promote more accurate, cost-efficient fabrication models? The other problem faced in the BIM world is how do we actually communicate with one another? There is no clear standard for the BIM community, and the addition of manufacturing only adds further challenge. In this class, we’ll discuss the opportunities from a business perspective.  Because of BIM, we’ve needed as a manufacturer, to learn how to share project model essentials with the entire BIM project team, but still keep our product specific “detail” outside of the project model simply because the information we need is not germane to the overall project model and requirement. Because of these challenges and the others I’ve mentioned in the outline, we figure if we have these challenges, others must too!

4. © 2012 Autodesk Learning Objectives At the end of this class, you will be able to:  Describe the role of BIM in AEC, and Manufacturing workflows  Identify challenges resulting from data coordination/communication problems  List opportunities for improved interoperability between BIM, product design and fabrication workflows  Establish business value related to improved coordination

5. © 2012 Autodesk Describe the role of BIM in AEC, and Manufacturing workflows

6. © 2012 Autodesk Identify challenges resulting from data coordination/communication problems

7. © 2012 Autodesk List opportunities for improved interoperability between BIM, product design and fabrication workflows

8. © 2012 Autodesk Establish business value related to improved coordination

9. © 2012 Autodesk Autodesk, AutoCAD* [*if/when mentioned in the pertinent material, followed by an alphabetical list of all other trademarks mentioned in the material] are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2012 Autodesk, Inc. All rights reserved.