1. Fiber connections of QIE cards in UX5 Ulrich Heintz 4/23/20151

2. MTP fanout MPO adapter Maybe just an inline adapter rather than a patchpanel Y fiber MPO adapter In front panel trunk fiber (installed – 72 used by HF FE) Specifications: Fiber: graded-index multimode OM4, 50/125 µm Connectors: 12-fiber MPO female 4/23/20152 QIE card 144 used in detector 200 built

3. MTP fanout Specification: 6 Fibers, multimode 50μm OM4, micro-distribution 3mm aqua jacket -to- 900um multi-color, LSZH Total length: 12”, breakout length: 8" Connector A: 12-fiber MPO male with 6 central positions populated Connector B: 6 times LC clipped together to 3 pairs Number needed: 1/QIE card – total 200, buy 210, $115 each based on 20 Y fiber Specification: 12 Fibers, multimode 50/125μm OM4, micro-distribution 3mm aqua jacket – 2mm, LSZH Total length: 3 meters, breakout length: 1 meter Connector A: 12-fiber MPO male Connector B: 2 times 12 Fiber MPO female with 6 central positions populated Mapping: A 1-6 to B1 4-9 and A7-12 to B2 4-9 Number needed: one per 2 QIE cards – total 72, buy 90, $140 each based on 6 (OM3) MPO adapter Specification: must fit front panel cut-out Number needed: 1/QIE card – total 200, buy 210,  $20 each MPO adapter Specification: screw holes for panel mount Number needed: 1/Y fiber – total 72, buy 90,  $10 each 4/23/20153 Molex 106114-1100