1. Ironing and Pressing

2. What’s the Difference? Ironing: –The process of using an iron to remove wrinkles from damp, washable clothing. Heat and pressure are used to flatten the fabric. –Ironing is done with a gliding or sliding motion, BACK AND FORTH. It is done to the entire garment after laundering.

3. Pressing: –Involves NO sliding of the iron. The iron is placed on the fabric and then lifted, in an UP AND DOWN motion. –Moisture is added from a pressing cloth or from steam in the iron. –It is often done to apparel between wearing and during garment construction.

4. Number One Rule! The number one rule when it comes to ironing or pressing is: PRESS AS YOU GO! -It flattens and sets the stitches so the seam lays smooth and flat. -It gives you a crisp, professional-looking garment. Why?

5. Ironing and Pressing Equipment Tailor’s Ham Used to make an even curve on seams and darts while pressing.

6. Sleeve Board Mini ironing board that lets you press sleeves easily.

7. Point Press Pushes out points on projects to get sharp, even points.

8. Point presser For pointed areas such as collars and cuffs.

9. Sleeveboard For enclosed seams such as sleeves

10. Steam Iron A heated piece of equipment that flattens creases and shapes.

11. Ironing Board A padded, flat, heat-resistant surface used for ironing and pressing.

12. Pressing Cloth A thin cloth placed over fabric while ironing. It creates extra steam when wet. It also prevents scorching and shine marks on fabric while ironing.

14. Other Important Info -You should use distilled water in steam irons because then it won’t leave behind mineral build-up that can clog the steam vents. -Always iron WITH the grain of the fabric to prevent permanent stretching. -A straight seam should be pressed flat and then open. This sets the stitches so the seam will lie smooth and flat.

15. Temperature Settings -It is very important to pay attention to the temperature settings when ironing different types of fabric. -Synthetic fibers are extremely heat sensitive and can be irreversibly damaged by high heat. -Most steam iron settings are broken into: High - Cotton & Linen Medium - Wool & Silk Low - Synthetics

16. Dials on most irons Low :Synthetics Medium : Wool and Silk High: Cotton and Linen

17. Using Fusible Interfacing The side of the fusible interfacing with the glue or adhesive should be placed on the wrong side of the fabric. Press and hold for 10-15 seconds using a press cloth and steam.

18. Ironing Extreme or NOT ???

19. What do you think? Have you ever thought about your daily ironing and pressing becoming a highly dangerous sport? Have you ever thought about your daily ironing and pressing becoming a highly dangerous sport? It is now, no need to just iron you might as well participate in extreme ironing. It is now, no need to just iron you might as well participate in extreme ironing.

20. Extreme Ironing