Presentation is loading. Please wait.

Presentation is loading. Please wait.

Uplink OLPC Modification: Replacement of SIR_DL by SINR_DL for Easy Measurement IEEE 802.16 Presentation Submission Template (Rev. 9) Document Number:

Similar presentations


Presentation on theme: "Uplink OLPC Modification: Replacement of SIR_DL by SINR_DL for Easy Measurement IEEE 802.16 Presentation Submission Template (Rev. 9) Document Number:"— Presentation transcript:

1 Uplink OLPC Modification: Replacement of SIR_DL by SINR_DL for Easy Measurement IEEE 802.16 Presentation Submission Template (Rev. 9) Document Number: IEEE S802.16m-09/1597 Date Submitted: 2009-07-08 Source: Rongzhen Yang, Apostolos Papathanassiou, E-mail: Apostolos.Papathanassiou@intel.com;Apostolos.Papathanassiou@intel.com Wei Guan, Hujun Yin, Yang-seok Choi| Rongzhen.Yang@intel.comRongzhen.Yang@intel.com Intel Corporation Dong-cheol Kim, Wookbong Lee, HanGuy Cho, Jin Sam Kwak dongcheol.kim@lge.com LG Electronics Venue:. IEEE 802.16m Session#62, San Francisco, USA Category: AWD comments / Area: Chapter 15.3.9.4 (Uplink Power Control) “Comments on AWD 15.3.9.4 Uplink Power Control” 802.16m amendment working document Base Contribution: IEEE C802.16m-09/ 1524 Purpose: The analysis to support related modification in IEEE C802.16m-09/ 1524. Notice: This document does not represent the agreed views of the IEEE 802.16 Working Group or any of its subgroups. It represents only the views of the participants listed in the “Source(s)” field above. It is offered as a basis for discussion. It is not binding on the contributor(s), who reserve(s) the right to add, amend or withdraw material contained herein. Release: The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution, and any modifications thereof, in the creation of an IEEE Standards publication; to copyright in the IEEE’s name any IEEE Standards publication even though it may include portions of this contribution; and at the IEEE’s sole discretion to permit others to reproduce in whole or in part the resulting IEEE Standards publication. The contributor also acknowledges and accepts that this contribution may be made public by IEEE 802.16. Patent Policy: The contributor is familiar with the IEEE-SA Patent Policy and Procedures: and.http://standards.ieee.org/guides/bylaws/sect6-7.html#6http://standards.ieee.org/guides/opman/sect6.html#6.3 Further information is located at and.http://standards.ieee.org/board/pat/pat-material.htmlhttp://standards.ieee.org/board/pat

2 Motivations Original OLPC formula for SIMO: Issue for Product Implementation: SIR_DL is more difficult to be measured than SINR_DL Question: could we replace SIR_DL by SINR_DL?

3 Formula Analysis Here, is DL total Tx power, is thermal noise power of whole band

4 Study of 4 IMT-Adv Scenarios (1) InHUMi UMa RMa

5 Study of 4 IMT-Adv Scenarios (2) From the ratio CDF, we can get: –There is not difference between CINR/SIR for UMi, UMa, RMa scenarios –InH need to be farther evaluated because of big difference between CINR/SIR ratio. In addition, 16m (PCLA DG) scenario is also selected for performance evaluation.

6 Performance Evaluation: IMT-Adv InH SIMO 1x4

7 Performance Evaluation: IMT-Adv InH CSM 1x4

8 Performance Evaluation: IEEE 16m PCLA DG 500m Scenario (1x2 SIMO)

9 Conclusion SINR_DL can replace the SIR_DL in 16m OLPC formula and will not bring the significant performance difference. Recommendation: accept the related modification in contribution C80216m/xxxx;


Download ppt "Uplink OLPC Modification: Replacement of SIR_DL by SINR_DL for Easy Measurement IEEE 802.16 Presentation Submission Template (Rev. 9) Document Number:"

Similar presentations


Ads by Google