1. Comments on HO decision and initiation (16.2.6.3.2) IEEE 802.16 Presentation Submission Template (Rev. 9) Document Number: IEEE C80216m-10_0765 Date Submitted: 2010-7-7 Source: Whai-En Chen, Shih-Yuan Cheng, Yu-Chan Lin wechen@niu.edu.tw National Ilan University Shiann-Tsong Sheu, Chih-Cheng Yang stsheu@ce.ncu.edu.tw National Central University Kanchei(Ken) Loa, Yi-Ting Lin, Tsung-Yu Tsai, Youn-Tai Lee, Chun-Yen Hsu, Chiu-Wen Chen loa@iii.org.tw Institute for Information Industry Yang-Han Lee, Yih Guang Jan Tamkang University * http://standards.ieee.org/faqs/affiliationFAQ.html Venue: IEEE Session#68, San Diego, California, USA. Re: IEEE 802.16-10/0011, “IEEE 802.16 Working Group Sponsor Ballot”, on P802.16m/D6 Base Contribution: This is base contribution. Purpose: To be discussed and adopted by TGm for 802.16m SB. Notice: This document does not represent the agreed views of the IEEE 802.16 Working Group or any of its subgroups. It represents only the views of the participants listed in the “Source(s)” field above. It is offered as a basis for discussion. It is not binding on the contributor(s), who reserve(s) the right to add, amend or withdraw material contained herein. Release: The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution, and any modifications thereof, in the creation of an IEEE Standards publication; to copyright in the IEEE’s name any IEEE Standards publication even though it may include portions of this contribution; and at the IEEE’s sole discretion to permit others to reproduce in whole or in part the resulting IEEE Standards publication. The contributor also acknowledges and accepts that this contribution may be made public by IEEE 802.1 Patent Policy: The contributor is familiar with the IEEE-SA Patent Policy and Procedures: and.http://standards.ieee.org/guides/bylaws/sect6-7.html#6http://standards.ieee.org/guides/opman/sect6.html#6.3 Further information is located at and.http://standards.ieee.org/board/pat/pat-material.htmlhttp ://standards.ieee.org/board/pat

2. Introduction Page 282 line 24 section 16.2.6.3.2 “HO decision and initiation” states “The AMS shall not perform HO to a cell with Cell Bar bit=1 in its S-SFH. The “Cell Bar” bit, when set, indicates that an AMS should not perform network entry or re-entry to this cell.” The procedure should be clarified when the Cell Bar bit is set. 2

3. Proposed Text [Modify the following text in page 282 line 24 section 16.2.6.3.2 “HO decision and initiation”] The AMS shall not perform HO to a cell with Cell Bar bit=1 in its S-SFH. The “Cell Bar” bit, when set, indicates that an AMS should shall not perform network entry or re-entry to this cell. 3