1. Operating Systems CSE 411 Multi-processor Operating Systems Multi-processor Operating Systems Dec. 8 2006 - Lecture 30 Instructor: Bhuvan Urgaonkar

2. Grading Concerns Exam 1 distribution –80+ –70+ –60+ –50+ –40+ –40- Exam 2 distribution –80+ : 4 –70+ : 5 –60+ : 9 –50+ : 18 –40+ : 17 –40- : 7 Performance on homeworks/quizzes/projects has been much better than on exams Project 3 will be made easier More time for Project 2 Last quiz to replace homework 5 –Will be long and comprehensive –Will help you prepare for the final exam A, A- B+, B B-, C+ C, C-, …

3. Multi-processor Computers Asymmetric –Master processor runs the kernel –Other processors run user code Symmetric –Each server is self-scheduling Single run queue or per -processor run queue –Scheduling and synchronization more complex

4. Overview of Symmetric Multiprocessor (SMP) More CPUs: more processing power but more contention for the bus RAM CPU 0 CPU 1 HW cache

5. Hardware features of Modern SMPs Common memory –All CPUs connected to a common bus –Hardware circuit called memory arbiter inserted between the bus and each RAM chip Serializes accesses to memory Actually there is an arbiter even in uni-processors –Why: Remember DMA? Hardware support for cache synchronization –Contents of the cache and memory maintain their consistency at the hardware level just as in a uni-processor –Cache snooping: Whenever a CPU modifies its cache, it must check if the same data is contained in another cache, and if so, notify it of the update Note: Implemented in hardware, not of concern to the kernel

6. Hardware features of Modern SMPs (contd.) Distributed Interrupt Processing –Being able to deliver interrupt to any CPU crucial to exploit the parallelism of the SMP architecture –Special hardware for routing interrupts to the right processors –Interprocessor interrupts Used fot TLB consistency among other things

7. OS Issues for SMP How should the CPU scheduler work? How should synchronization work?

8. CPU Scheduling in a Multi-processor Kernel and user code can now run on N processors –A multi-threaded process may span multiple CPUs Uni-processor: Scheduler picks a process to run Multi-processor: Scheduler picks a process and the CPU on which it will run A process may move from one CPU to another during its lifetime Two main factors affecting scheduler design –Cache affinity: Would like to run a process on the same CPU –Load balancing: Would like to keep all CPUs equally busy –These are often at odds with each other: Why?

9. Proportional Fair Scheduling in SMPs What will happen if we have two threads with weights 1 and 10 and a Lottery scheduler on a dual-processor? Not all combinations of weights are feasible! Given k threads with weights w1, …, wk, and p processors, can you think of a feasibility criterion?

10. Symmetric Multi-threading Idea: Create multiple virtual processors on a physical processor –Illusion provided by hardware –Called hyper-threading in Intel machines –The OS sees the machine as an SMP –Each virtual processor has its own set of registers and interrupt handling, cache is shared Why: Possibility of better parallelism, better utilization How does it concern the OS? –From a correctness point of view: it does not –From an efficiency point of view: the scheduler could exploit it to do better load balancing

11. Synchronization in SMPs

12. Synchronization building blocks: Atomic Instructions An atomic instruction for a uni-processor would not be atomic on an SMP unless special care is taken –In particular, any atomic instruction needs to write to a memoy location –Recall TestAndSet, Swap Need special support from the hardware –Hardware needs to ensure that when a CPU writes to a memory location as part of an atomic instruction, another CPU can not write the same memory location till the first CPU is finished with its write Given above hardware support, OS support for synchronization of user processes same as in uni-processors –Semaphores, monitors Kernel synchronization raises some special considerations –Both in uni- and multi-processors

13. Kernel synchronization

14. Interlude: Back to the past: A little background (mostly revision) Recall: A kernel is a “server” that answers requests issued in two possible ways –A process causes an exception (E.g., page fault, system call) –An external device sends an interrupt Definition: Kernel Control Path –The set of instructions executed in the kernel mode to handle a kernel request –Similar to a process, except much more rudimentary No descriptor of any kind –Most modern kernels are “re-entrant” => Multiple KCPs may be executing simultaneously Synchronization problems can occur if two KCPs update the same data –How to synchronize KCP access to shared data/resources?

15. How to synchronize KCP access to shared data? Can use semaphores or monitors Not the best solution in multi-processors Consider two KCPs running on different CPUs –If the time to update a shared data structure is very short, then semaphores may be an overkill Solution: Spin Locks –Do busy wait instead of getting blocked! –The kernel programmer must decide when to use spin locks versus semaphores –Spin locks are useless in uni-processors: Why?

16. Two other mechanisms for easy to achieve kernel synchronization Non-preemptible kernel design –A KCP can not be pre-empted by another one Useful only certain KCPs, such as those that have no synch. issues with interrupt handlers –Not enough for multi-processors since multiple CPUs can concurrently access the same data structure –Adopted by many Oses including versions of Linux upto 2.4 –Linux 2.6 is pre-emptible: faster dispatch times for user processes Interrupt disabling –Disable all hardware interrupts before entering a critical section and re-enable them right after leaving it –Works for uni-processor in certain situations The critical section should not incur an exception whose handler has synchronization issues with it The CS should not get blocked –What if the CS incurs a page fault? –Does not work for multi-processors Interrupts must be