1. Animate picture to peek from bottom (1 of 3) 1. Right click on picture you want to animate. 2. Click on Custom Animation. 2 1 R

2. Animate picture to peek from bottom (2 of 3) 1. Click in Entry animation box. 2. Scroll down. 3. Click Peek From Bottom. 4. Click OK. 3 4 1 2

3. Animate picture to peek from bottom (3 of 3) 1. When you run the slide show the picture will appear to peek up from the bottom. (1) Peek from bottom

4. Duplicating a slide Duplicating a slide (1 of 2) 1. Click on Insert. 2. Click Duplicate Slide. 3. This will make a copy of slide two. 2 1 (3) Slide two

5. Duplicating a slide Duplicating a slide (2 of 2) 1. A duplicate of the slide two has been added as slide three. (1) Slide three

6. Deleting all objects in an area 1. Drag to select the all objects in an area you want to delete. 2. Release the mouse button. 2 1 Deleting all objects in an area (1 of 3)

7. Deleting all objects in an area 1. Press the delete key to remove the selected objects. (1) Press delete Deleting all objects in an area (2 of 3)

8. Deleting all objects in an area Deleting all objects in an area (3 of 3) 1. All the selected objects are deleted. (1) Objects deleted

9. Deleting separate objects Deleting separate objects (1 of 2) 1. Click on the first object you want to delete. 2. Hold down the shift key. 3. Click on the second object you want to delete. 4. Press the delete key. 1 (4) Press delete 3 (1) Title bar (2) Hold down shift

10. Deleting separate objects Deleting separate objects (2 of 2) 1. All selected objects are deleted. (1) Objects deleted

11. Replacing words Replacing words (1 of 2) 1. Drag to select words you want to replace. 2. Release the mouse button. 2 1

12. Replacing words Replacing words (2 of 2) 1. Type in “Control”. (1) Type “Control”

13. Adding a moon AutoShape Adding a moon AutoShape (1 of 3) 1. Click on View. 2. Click Toolbars. 3. Click Drawing. 2 3 1

14. Adding a moon AutoShape Adding a moon AutoShape (2 of 3) 1. Click the AutoShapes button on the Drawing toolbar. 2. Click Basic Shapes. 3. Click on the Moon button. 2 3 1

15. Adding a moon AutoShape Adding a moon AutoShape (3 of 3) 1. Drag to place Moon in upper left corner. 2. Release mouse button. 2 1

16. Free Rotating an AutoShape Free Rotating an AutoShape (1 of 3) 1.Click on the AutoShape you want to Rotate. 2. Click the Free Rotate button on the Drawing toolbar. 2 1

17. Free Rotating an AutoShape Free Rotating an AutoShape (2 of 3) 1.Drag the corner of the object to rotate it. 2. Release the mouse button. 2 1

18. Free Rotating an AutoShape Free Rotating an AutoShape (3 of 3) 1.Click on the Select Objects button on the Drawing toolbar to stop turn off Free Rotate. 1

19. Moving an AutoShape Horizontally Moving an AutoShape Horizontally (1 of 2) 1.Hold down the Shift key so the Moon will not move vertically. 2. Drag Moon to the right. 3. Release mouse button. 4. Release the shift key. 2 3 (4) Release shift (1) Hold down shift

20. Moving an AutoShape Horizontally Moving an AutoShape Horizontally (2 of 2) 1.Moon has been moved only horizontally. Note you can also use the shift key to move an object only vertically.

21. Adding a shadow to an AutoShape Adding a shadow to an AutoShape (1 of 2) 1.Click on the AutoShape you want to have a shadow. 2. Click the Shadow button on the Drawing toolbar. 3. Click on the type of shadow you want. 2 3 1

22. Adding a shadow to an AutoShape Adding a shadow to an AutoShape (2 of 2) 1.Shadow has been added to the moon. (1) Shadow

23. Moving an AutoShape shadow Moving an AutoShape shadow (1 of 4) 1.Click on the AutoShape that contains the shadow you want to alter. 2. Click on the Shadow button on the Drawing toolbar. 3. Click on Shadow Settings. 2 3 1

24. Moving an AutoShape shadow Moving an AutoShape shadow (2 of 4) 1.Click repeatedly on the Nudge Shadow right button on the Shadow Settings toolbar. 1

25. Moving an AutoShape shadow Moving an AutoShape shadow (3 of 4) 1. Shadow has moved to the right. 2.Click repeatedly on the Nudge Shadow left button on the Shadow Settings toolbar. 2 (1) Shadow moved

26. Moving an AutoShape shadow Moving an AutoShape shadow (4 of 4) 1.The shadow has been moved back to its original position. (1) Shadow is back

27. Changing the color of a shadow Changing the color of a shadow (1 of 5) 1.Click on the shadowed object you want to change. 2. Click the shadowed color arrow on the Shadow Settings toolbar. 3. Click on Scheme color you want. Note that if you alter your Scheme this color will change. 3 2 1

28. Changing the color of a shadow Changing the color of a shadow (2 of 5) 1. Color has changed to a Scheme color of blue. 2. Click the shadowed color arrow on the Shadow Settings toolbar. 3. Click on More Shadow Colors. 3 2 (1) Blue shadow

29. Changing the color of a shadow Changing the color of a shadow (3 of 5) 1. Click on the purple color. 2. Click OK. Note this shadow color will not change when you switch Color Schemes. 2 1

30. Changing the color of a shadow Changing the color of a shadow (4 of 5) 1. Click the shadowed color box on the Shadow Settings toolbar. 2. Click on Automatic. 3 2 (1) Purple shadow

31. Changing the color of a shadow Changing the color of a shadow (5 of 5) 1. Shadow color is back to shadow Scheme color of gray. Note if you change the color Scheme the shadow color will change automatically. (1) Automatic shadow color

32. Closing the Shadow Settings toolbar Closing the Shadow Settings toolbar (1 of 2) 1. Click the shadow button on the Drawing toolbar. 2. Click Shadow Settings. 3. Click the close box on the Drawing toolbar. 2 1 3

33. Closing the Shadow Settings toolbar Closing the Shadow Settings toolbar (2 of 2) 1. The Shadow Settings and Drawing toolbars have been closed. (1) Toolbars closed

34. Inserting an Excel table Inserting an Excel table (1 of 4) 1. Click on Insert. 2. Click Object. 2 1

35. Inserting an Excel table Inserting an Excel table (2 of 4) 1. Scroll down. 2. Click on Microsoft Excel worksheet. 3. Click OK. 2 3 1

36. Inserting an Excel table Inserting an Excel table (3 of 4) 1. Click off the Excel table object. 1

37. Inserting an Excel table Inserting an Excel table (4 of 4) 1. A blank Excel table as been added to our slide. (1) Excel Table

38. Changing the size of an Excel table Changing the size of an Excel table (1 of 4) 1. Double click on an Excel table. 1

39. Changing the size of an Excel table Changing the size of an Excel table (2 of 4) 1. Drag bottom right corner to size Excel table. 2. Release the mouse button. Repeat the pervious steps until you have a sheet that is three columns by five rows. 2 1

40. Changing the size of an Excel table Changing the size of an Excel table (3 of 4) 1. Click off the Excel table. 1

41. Changing the size of an Excel table Changing the size of an Excel table (4 of 4) 1. We now have an Excel table that is three columns by five rows. (1) 3x5 table

42. Increasing the view size of an Excel table (1 of 2) 1. Click on the Excel object to select it. 2. Drag the bottom right corner. 3. Release the mouse button. 2 3 1

43. Increasing the view size of an Excel table (2 of 2) 1. The view size of the Excel table has been increased by approximately 200%. (1) 200% view

44. Moving an Excel table (1 of 2) 1. Click on table you want to move. 2. Drag the table. 3. Release the mouse button. 2 3 1

45. Moving an Excel table (2 of 2) 1. Table has been moved. (1) Table moved

46. Formatting an Excel table Formatting an Excel table (1 of 6) 1. Double click to edit table. 1

47. Formatting an Excel table Formatting an Excel table (2 of 6) 1. Type in the Goals of a control person. (1) Type in text

48. Formatting an Excel table Formatting an Excel table (3 of 6) 1. Click on Format. 2. Click AutoFormat 2 1

49. Formatting an Excel table Formatting an Excel table (4 of 6) 1. Click on Colorful 1.2. Click OK. 2 1

50. Formatting an Excel table Formatting an Excel table (5 of 6) 1. Click off the table. 1

51. Formatting an Excel table Formatting an Excel table (6 of 6) 1. Excel table has been formatted. (1) Formatted table

52. Drawing a bit mapped picture on our slide Drawing a bit mapped picture on our slide (1 of 8) 1. Click on Insert. 2. Click Object. 2 1

53. Drawing a bit mapped picture on our slide Drawing a bit mapped picture on our slide (2 of 8) 1. Click on Bitmap Image. 2. Click OK. 2 1

54. Drawing a bit mapped picture on our slide 1. Click on Pencil tool. 2. Hold down the mouse button to draw the picture. Drawing a bit mapped picture on our slide (3 of 8) 1 (2) Drawing

55. Drawing a bit mapped picture on our slide 1. Click on View. 2. Click Color Box. Drawing a bit mapped picture on our slide (4 of 8) 2 1

56. Drawing a bit mapped picture on our slide 1. Click on Red. 2. Click on the fill tool. 3. Click in the small object between the two fingers. Drawing a bit mapped picture on our slide (5 of 8) 2 3 1

57. Drawing a bit mapped picture on our slide 1. Click on Yellow. 2. Click in the large object. Note if the paint spills out and covers the rest of the picture click Edit and Undo and make sure there are no gaps in the lines you have drawn. Drawing a bit mapped picture on our slide (6 of 8)

58. Drawing a bit mapped picture on our slide 1. Click off drawing object to go back to editing slide. Drawing a bit mapped picture on our slide (7 of 8) 1

59. Drawing a bit mapped picture on our slide 1. Bitmapped image has been added to slide. Drawing a bit mapped picture on our slide (8 of 8) (1) Bitmap

60. Altering a bit mapped picture 1. Click on Bitmapped image. 2. Click the Set Transparent color button on the Picture toolbar.. 3. Click on the white space in the picture. Altering a bit mapped picture (1 of 6) 2 3 1

61. Altering a bit mapped picture 1. Click the Format button on the Picture toolbar. Altering a bit mapped picture (2 of 6) 1

62. Altering a bit mapped picture 1. Drag to select the Scale Height box. 2 Release mouse button. Altering a bit mapped picture (3 of 6) 2 1

63. Altering a bit mapped picture 1. Type in a height of 150 and the Width will also be made 150 because Lock aspect ratio is on. 2. Click OK. Altering a bit mapped picture (4 of 6) 2 (1) Type 150

64. Altering a bit mapped picture Altering a bit mapped picture (5 of 6) 1. Drag the picture to the right. 2. Release the mouse button. 12

65. Altering a bit mapped picture Altering a bit mapped picture (6 of 6) 1. Picture has been given a transparent color, sized and moved. 2. Click off picture. (1) Altered picture 2