1. Machine Safety Presentations Safety Unit

2. Presentations Tool Safety Machine Safety Teaching yourselves and peers

3. Tricks and Tips Watch the “Power Point Basics video (embed)

4. Research Review the handouts Diagram and Machine Safety

5. Diagram Use the diagram to photograph the machine parts Use the photos in your presentation Label the parts appropriately

6. Presenting View Mr. H’s presentation Your presentation should include: 1.Title 2.Machine description 3.Top 10 Safety Rules 4.Top 10 Operational Rules

7. Paraphrasing Reword all information Include references

8. Table Saw Mr. Heydens

9. Table Saws Rip, cross cut, bevel and cut angles Precise

10. Top 10 Safety Rules 1.3”rule 2.Hands off saw 3.Align fence

11. Top 10 Safety Rules 4.Be aware 5.Use guard 6.Adjust when the machine is off

12. Top 10 Safety Rules 7.Saw must be off when clearing it 8.Do not over reach 9.Use a stop block when cross cutting 10.Raise blade 1/4” above stock

13. Operational Safety Rules 1.Operate with a positive and safe attitude (#1) 2.Disconnect power when not in use (#2) 3.Use the cross cut sled (#8)

14. Operational Safety Rules 4.Use a stop block when cutting multiples (# 9) 5.Ensure no one is behind you (# 11) 6.Use a push stick when stock is within 4” of blade(#13)

15. Operational Safety Rules 7.Stand comfortably (#14) 8.Stand to the left of the blade (#15) 9.Make sure the blade has stopped turning (#16)

16. Table Saw

17. Partners Find who has the matching card

18. Grade 7 Topics Belt / Disc Sander Scroll Saw Drill Press

19. Grade 8 Topics Band saw Scroll Saw Router Drill Press Belt / Disc Sander

20. Grade 9 Topics Band saw Scroll Saw Router Drill Press Compound Miter Saw Belt / Disc Sander