1. dMT – SPC Dry Metal Protective Coatings
dMT Ecotech GmbH International of Munich, Germany Solutions for friction control
Uncontrolled friction leads to premature metal wear = higher maintenance costs + unnecessary down-time

2. dMT – SPC Dry Metal Protective Coatings
Crane Wheels and Rails
Rail / Wheel Conveying Systems
Rotary Equipment
In-Plant Railroad Systems

3. dMT – SPC Dry Metal Protective Coatings
dMT-SPC metal protective coatings contain highly effective components (no graphite), which create and maintain an optimum coefficient-of-friction between two contacting metal surfaces.

4. dMT – SPC Dry Metal Protective Coatings
Benefits & Characteristics
Substantial reduction of wear (metal flaking) = increased operating lives of wheels / rails, generally 3-5 times longer minimum. Proven wear reduction up to nearly 80%;
Continual, balanced coating (conditioning) of the metal surfaces to achieve a permanent, optimal coefficient of friction;
Dry coating – does not absorb dust particles, excellent bonding to metal surfaces, weather-resistent, temperature resistent up to 310 deg. C;
No negative influence on the operation of the machinery, no major alterations necessary for installation;
Maintenance-free, except when replacement blocks to be inserted;
Environmentally safe / does not endanger ground, water or air / not toxic / not flammable or explosive / clean area near equipment as coating does not drip or migrate and is neither a grease nor an oil.

5. dMT – SPC Dry Metal Protective Coatings
dMT Reference at PSA
PSA HNN CT Zeebrugge
Kaai , New Yorklaan 11
B – 8380 Zeebrugge, Belgium
Contact: Mr. Karl Chielens, Technical Manager
Tel
8 gantry cranes (3 of which Super-post-Panamax)
First delivery in Feb. 2007, installed few months later on first crane. Goal was to reduce
wheel flange wear;
Second order came in July 2008 for a second and new crane, this time flangeless
wheels with horizontal guide rollers.
Obviously the customer is satisfied with our products or would not have ordered again for another
crane after one year of initial testing. Contact with him in English OK.

6. dMT-SPC Interlocking low c.o.f. blocks with steel applicator
Products
dMT-SPC Interlocking low c.o.f. blocks with steel applicator
2 interlocking SPC blocks type TSB-080 with spring-loaded, stainless-steel applicator

7. dMT-SPC low c.o.f. blocks with steel applicator
Products
dMT-SPC low c.o.f. blocks with steel applicator
TRB-100 SPC Block with spring-loaded, stainlesssteel applicator

8. Products dMT-SPC Interlocking traction blocks with steel applicator
2 interlocking SPC traction-enhancement blocks type MSB-075 with spring-loaded, stainless steel applicator

9. dMT-SPC steel applicator clamp
Products
dMT-SPC steel applicator clamp
Steel applicator threaded-bolt clamp type KVR & KVR for easy installation of standard applicators

10. dMT-SPC steel applicator with arm
Products
dMT-SPC steel applicator with arm
Stainless-steel applicator type KR-SB-160MH with mounting bracket welded to applicator for easy installation of standard applicators (no need for steel clamps)

11. dMT-SPC steel applicator clamp holder
Products
dMT-SPC steel applicator clamp holder
Unit type SKS-2KR with cross-bar and clamp device for easy installation of standard applicators

12. dMT-SPC trunnion kit type DRR-T-3.0
Products
dMT-SPC trunnion kit type DRR-T-3.0