1. Awareness Raising, Draft Guidance and Pilot Projects Regional Meeting on Nano for CEE Lodz, Poland: 26-27June 2011

2. Mandates for the Series of Workshops ICCM-2 (May, 2009) Resolution II/4 of ICCM-2 Endorsement of Nanotechnology/Manufactured Nanomaterials as an “Emerging Issue” for the Strategic Approach to International Chemicals Management (SAICM) “[ICCM-2]…encourages Governments and other stakeholders to assist developing countries and countries with economies in transition to enhance their capacity to use and manage nanotechnologies and manufactured nanomaterials responsibly, to maximize potential benefits and to minimize potential risks” 2

3. UNITAR/OECD Workshop Schedule Asia-Pacific Region (Beijing, China) on 27 November 2009; Central and Eastern European Region (Lodz, Poland) on 11 December 2009; Africa Region (Abidjan, Cote D’Ivoire) from 25-26 January 2010; and Latin America-Caribbean Region (Kingston, Jamaica) on 12 March, 2010. An additional, sub-regional meeting was also held for Arab Region countries from 11-13 April, 2010 in Alexandria, Egypt. 3

4. Workshop Participation Over 250 individuals attended from: some 108 countries that were represented from within the regions; 19 observer countries; 41 non-governmental organizations and 9 international organizations This included: 32 individuals from 23 countries for the Asia-Pacific Workshop; 19 individuals from 15 countries for the CEE Workshop; 41 individuals from 34 countries for the Africa Workshop; 29 individuals from 21 countries for the Latin America-Caribbean Workshop 24 individuals from 15 countries for the Arab Workshop 4

5. Original Workshop Objectives – Round 1  To inform national experts on nano within governments and other key representatives of governments and stakeholders in the UN regions with developing and transition countries about potential applications for (benefits) and risks from nano  To apply the information gained, above, on a technical level, to enable political decision-making feeding into ICCM-3  Focus: general chemicals management for professionals who deal with nano issues as part of their work 5

6. The Workshops 6

7. Outcomes of Round 1  Increased understanding by the participants on the implications of nano in their daily work as general chemicals management specialists in their countries;  Inputs received from participants on their anticipated country needs in order to be able to address nano as part of a sustainable general programme for the sound management of chemicals at the national level;  Understanding of the requirements of ICCM-3 for reporting on nano- related activities to protect human health and the environment in countries and among stakeholders; and,  Understanding of the outcomes of ICCM-2 as a first step towards deliberations for “furthering the nano agenda” at ICCM-3 7

8. Observations from Round 1  Resolutions developed at Africa and Latin America/Caribbean workshop;  Unanimous recommendations (from each workshop) for another round of workshops pre-OEWG/ICCM-3 with focus on preliminary outcomes of pilots and ICCM-3 preparations;  “Excellent” overall ratings from workshop participants in workshop evaluation forms; usually near-unanimity 8

9. Conclusions from Round 1  The development of guidance and training materials/methodologies for national pilot projects on incorporating nano as part of a sustainable general programme for the sound management of chemicals (initial results of the pilots will be presented by participating countries at ICCM-3);  The undertaking of a planned second round of nano workshops for UN developing and transition countries in advance of ICCM-3  The development of networks of chemicals management experts interested in and/or assigned to address nano issues in developed, transition and developing countries; 9

10. Conclusions from Round 1(cont’d)  The development of inputs (e.g. resolutions, INF documents, formal reporting and further identifications of country needs) for the Open- Ended Working Group (OEWG), to be held in Belgrade, Serbia, in November 2011, and ICCM-3 in Geneva (June/July 2012);  Beyond ICCM-3, the further development of capacities and capabilities in countries at the national, regional and international levels to address nano issues. 10

11. Round 2 – Regional Workshops  Nairobi, Africa: 5-6 April 2011  Panama City, Panama: 31 May – 1 June 2011  Lodz, Poland: 26-27 June 2011  Beijing, China: 5-6 September 2011 (TBC) 11

12. Outline of Draft Guidance  Background  Priority setting  National committee  National Profile Chapter  Awareness raising  Training  National nano programme 12

13. Background  Definitions of “Nano”  Applications of Nano – some examples  Environmental and Health concerns  Research and Development  Nano EHS as part of a programme for the sound management of chemicals  Relevant international work  Nano and the GHS  Relevant global resolutions 13

14. Priority-Setting for Nano Criteria for Priority Setting:  Feasibility  Time frame  Stakeholder commitment  Potential for support  Economic impact  Assessment 14

15. Preparatory Considerations and National Committee for nano  Secretariat and Lead Agency selection  Workplan development  Planning for an inception workshop  Set up of national committee: both internal (within government) and external  TORs developed and approved for committee  Activities begin! 15

16. Updating/Developing National Profile with a Nano Chapter 1.Introduction 2.National Background Information 3.Status of Research and Development Activities (e.g. materials development, risk research) on Manufactured Nanomaterials (“Nano”) 4.Governance-Current Structure for Management of Nano (e.g. materials development and risk research) 5. Positive and Sustainable Impacts (Benefits) of Nano 16

17. Updating/Developing National Profile with a Nano Chapter (cont’d) 6. Activities on Management of Risks Related to Nano 7. Stakeholders and Nano Risk Management 8. Internationally Available Information on Nano and Regional Needs 9. Resources Available and Needed for Nano Risk Management 10. Conclusions and Recommendation 17

18. Development of a National Nano Policy  Integrated approach and co-ordination: SAICM and Conventions  Mainstreaming into development planning  Cover full life cycle  Ministries involved, e.g. science and technology, trade, health, environment, labour, agriculture, industry, transport, customs, etc. + as appropriate foreign affairs, justice and planning 18

19. Elements of a National Nano Policy (4 Steps Procedure) 19 Step 1 Identification of ministries and other stakeholders (industry, NGOs), working groups, coordinating mechanism Step 2 Developing a nano national implementation plan (NANO policy) with: Common communication strategy, public dialogue Research Voluntary measures Occupational health at the workplace Risk management on human health and environment Economic and social impact, ethical issues Step 3 Stepwise implementation of the NANO policy by training and learning Step 4 Periodic reporting and amending of the NANO policy

20. Awareness Raising Among Key Groups Target Groups:  High-level decision-makers  The public  Civil Society  SMEs/Importers/Trade Associations  Others? 20

21. Targeted Training for Professionals and Workers Identified groups:  Customs training  Training of industrial hygienists  Training of workers  Training of environment and health specialists  Others? 21

22. The National Nano Programme National Programme can comprise:  Priority activities to build/strengthen capacities  Linkages to other areas of/tools for sound chemicals management (e.g. GHS, National Profile, SAICM Implementation Plan)  National Policy is at the “core” of the programme  Nano Committee directs and guides the programme  Main focus is environmental/health protection with regard to both risks and applications (promotion of applications)  Reflects agreed nano priorities  Is updated regularly 22

23. International Aspects  Sharing Lessons Learned  Examples of National Experiences  International Declarations Resolutions  IFCS  SAICM  ICCM-3 report 23

24. Project Overview Diagram 24 ICCM3 Side-event

25. Thank you! 25 www.unitar.org/cwm/nano nano@unitar.org