1. Super Vac Smoke Ejector SECTION: Tools and Equipment ISSUED: 02-2011REVISED: ##-####

2. Objectives To provide an understanding of the following –Specifications –Use –Maintenance –Safety

3. Specifications 115V 16” electric smoke ejector 5200 cubic feet per minute at 1725 RPM 4 blade aluminum alloy propeller Motor is explosion proof and UL rated Unit weighs 50 lbs.

4. Specifications 20’ flexible ducting Ducting has high tensile reinforcing wire to maintain maximum airflow

5. Use Ventilation –Positive –Negative –Combination May be used inside buildings because unit does not emit toxic fumes Pull out switch rod to turn unit on Push switch rod in to turn unit off

6. Use Used with San Jose bracket to hang from ladder, window or to stack Used with ducting for confined space ventilation

7. Maintenance Disconnect unit from power source before any maintenance is performed Check blade for build-up of debris or dirt which may cause imbalance Clean with mild detergent or water Position guards with rings to outside and spot welds on bottom when replacing after cleaning Unit is completely sealed and does not require any lubrication for life of the motor

8. Safety Wear proper PPE –Helmet, gloves and eye protection as a minimum Check ventilator inlet and outlet guard for obstructions Remove any objects that could be drawn into ventilator intake Place unit in desired location before connecting to power supply Do not wear loose clothing that may be drawn into ventilator Use proper voltage

9. Safety Check ventilator inlet and outlet guard for obstructions Ensure guards are properly secured Do not operate ventilator on unsteady surfaces such as tables or slanted surfaces Avoid using near water Do not place fingers or foreign objects in ventilator