Presentation is loading. Please wait.

Presentation is loading. Please wait.

Chapter 5 Intro to Routing & Switching.  Upon completion of this chapter, you should be able to:  Describe the operation of the Ethernet sublayers.

Similar presentations


Presentation on theme: "Chapter 5 Intro to Routing & Switching.  Upon completion of this chapter, you should be able to:  Describe the operation of the Ethernet sublayers."— Presentation transcript:

1 Chapter 5 Intro to Routing & Switching

2  Upon completion of this chapter, you should be able to:  Describe the operation of the Ethernet sublayers.  Identify the major fields of the Ethernet frame.  Describe the purpose and characteristics of the Ethernet MAC address.  Describe the purpose of ARP.  Explain how ARP requests impact network and host performance.  Explain basic switching concepts.  Compare fixed configuration and modular switches.  Configure a Layer 3 switch.

3 5.1.1

4  Most widely used LAN technology  What 2 layers does it operate at?  Data link & physical  What are the 2 sublayers of the data link?  LLC & MAC

5  IEEE 802.2  Helps communicate with the upper network layer  Adds control info  implemented it in software

6  Encapsulates the data  Adds MAC addresses  Adds error detection to frame  Media Access Control  Placing the frames on the media  Ethernet is a logical bus; physical star  Signal passes to all  Can send whenever  Can be collisions

7  Ethernet is contention-based/non-deterministic  Data contends or shares for a spot on the media  Doesn’t know when it’ll get access to it  Listens for signal on media  No signal = transmit data  Transmit at same time= collision  Devices do not keep track of whose turn it is  More collisions= less throughput  SOLUTION: CSMA/CD & CSMA/CA

8  Listens for silence  Silence= transmit data  If devices transmit at same time, collision  Backoff random time, listen for silence, retransmit  Collision detection not a problem much anymore  Using switches & full-duplex, this is not a problem anymore

9

10  Wireless  Listen for silence  Sends Ready to Send message to AP  Gets a Clear to Send message from AP  Sends data

11  Used to identify frame  Each host has a unique address  Burned into NIC hardware  48-bits / 12 hex digits / 6 bytes  1 st 24 bits OUI; 2 nd 24 bits serial #

12

13

14  How many bits is a MAC address?  48 bits  What is the OUI in this MAC? A2:07:CC:F6:AD:32  A2:07:CC  What does a wireless network use to avoid collisions?  CSMA/CA  What sublayer places the frames on the media?  MAC

15  The OUI is how many bytes? 33  Ethernet shares access to the media. It contends for the media and does not take turns transmitting. Not taking turns means the network is…  Nondeterministic  Is the MAC address found in hardware or software?  Software End of Day One

16 5.1.2

17  Min. frame size is 64 bytes; max is 1522 bytes  Data is 46-1500 bytes 64 bytes is considered a collision fragment & will be dropped PREAMBLE- used timing/synchronization of the frame between send & receiver. Basically saying., “Here comes a frame!”

18  5.1.2.4

19  What important addresses are encapsulated into a frame?  Source & destination MAC  What does the preamble used for?  Timing/synchronization  What is the minimum frame size?  64 bytes  What happens if a frame is less than 64 bytes?  Considered a fragment & dropped

20  How many bits in a MAC address?  48 bits  How many hex digits?  12  The first 6 hex digits are what?  The OUI  The OUI would then be the 1 st ____ bytes. 33  What sublayer is used to communicate with the upper layers?  LLC

21 5.1.3

22  IP Address:  32 bits, 4 octets  8 bits in each octet  11111111.10101010.11001100.00100101  Written in decimal  192.101.28.36  Value in each octet from 0-255  That’s a total of 256 numbers.

23  Add up the values of the binary 1’s  156  11100101  229 1286432168421 10011100

24  Ipconfig /all  Hexadecimal (Base 16)  0-9, A-F (10-15)  16 total #’s

25

26  Handouts

27  Begin with a 0x  0xA4

28  One to one communication

29  One to all in a network  Dest. MAC address will be all F’s  DHCP & ARP use broadcasts

30  One to a group in a network  Remote gaming or video conference  Dest. IP will be 224.0.0.0 -239.255.255.255  Dest. MAC will begin with 01-00-5E

31  5.1.3.6

32  What kind of message gets sent from one PC to a group within a network?  Multicast  Identify each as unicast, multicast, or broadcast:

33 5.1.4

34  MAC address  Burned into NIC (DOES NOT CHANGE)  Similar to the name of a person  Physical address  IP address  Similar to the address of a person  Based on where the host is actually located  Logical address  Both the physical MAC & logical IP addresses are required for a computer to communicate just like both the name and address of a person are required to send a letter

35  Destination IP NEVER changes!  Source & Destination MAC changes at each router interface

36  5.1.4.3 Wireshark

37  How do you change your MAC address?  Get a new NIC  T or F. The destination IP address changes during transmission.  False  What happens to the source & destination MAC addresses as you go from router to router across the Internet?  They change (router port substituted (mac))

38  What is IEEE 802.2?  LLC sublayer  What is IEEE 802.3?  Ethernet/MAC sublayer  What is a layer 2 address?  MAC address  What is a layer 3 address?  IP address

39 5.2.1

40  ARP table of IP/MACs  Added from communication  Added from ARP requests  You have the dest. IP, not the MAC  ARP request is all F’s where?  Destination MAC  How is an ARP request sent?  Broadcast  Who replies to the ARP request?  Only one with matching dest. IP

41

42

43  Windows-  Arp –a  Cisco router  Router# show ip arp

44  If you want to access a remote server, and you don’t have the destination MAC, what gets substituted for it?  The default gateway’s MAC address  A router has ports with MAC addresses. How do you view the router’s ARP table?  Router#sh ip arp  What does ARP find? What do you know?  Finds the dest. MAC; you know the dest. IP

45 5.2.2

46  Broadcasts  It’s a broadcast. If many devices started at same time, there’d be a flood of ARP requests which would cause a reduction in performance for a short period of time.  Security  ARP poisoning (or spoofing)  Attacker forges MAC address to have frames delivered to different computer  Solution: Use a switch

47  Segments network into smaller collision domains  Replies go to one device only  Implement security too

48 5.3.1

49

50

51  Full duplex, Half duplex, Auto  Must match setting of device  Half duplex uses CSMA/CD to avoid collisions

52

53 When the auto-MDIX feature is enabled, the switch detects the required cable type for copper Ethernet connections and configures the interfaces accordingly

54  when the switch receives the frame, it stores the data in buffers until the complete frame has been received.  During the storage process, the switch analyzes the frame for information about its destination.  In this process, the switch also performs an error check using the Cyclic Redundancy Check (CRC) trailer portion of the Ethernet frame.

55  The switch buffers just enough of the frame to read the destination MAC address so that it can determine to which port to forward the  The destination MAC address is located in the first 6 bytes of the frame following the preamble. The switch looks up the destination MAC address in its switching table, determines the outgoing interface port, and forwards

56  Cisco uses cut-through switching  As soon as destination MAC is read, it forwards the frame  Fast-forward Lowest latency; in and out  Fragment-free Store first 64 bytes before forwarding Most errors & collision happen there (runts) If it makes it through, should be error-free

57

58  Complete 5.3.1.7

59

60  2 switches connect to each other. One port is 100Mbps and the other is 1000Mbps. What speed will that connection operate at?  100Mbps  What feature will allow you to use a straight- through cable to connect two switches together?  Auto-MDIX  Your switch port is connected to a hub with 3 computers on it. How many MAC addresses will be in the table for that port? 33

61  Switch it!  5.3.1.9  Do it at least 4 times  Different scenario each time  Lab together  Draw network from MAC address table

62 5.3.2

63  Fixed Configuration Switch  As is; no add-ons or changing  A 24 port switch will always be 24 ports  Modular  Add-in cards/ports  Stackable  Connected by special cable to act as one switch  Fixed may be stackable  PoE (Power over Ethernet)  Delivers power to a device, like an IP phone  We use this in school  More $$, faster forwarding rate

64

65  Which type of switch can you add a card to add more Ethernet ports or add fiber ports?  Modular  You bought a 24 port switch and cannot add more ports to it. What kind of switch did you buy?  Fixed  You have the switch above and need more ports. You then buy more 24 port switches and connect them with a special cable. What kind of switch do you now have?  Fixed & stackable

66 5.3.3

67  Looks like a switch  Combined with router functions  Adds in router functions  Knows which IP addresses are out each port too  Fast

68  Make an Ethernet port a routed port  To connect to the ISP  Configure a port  What have we configured with an IP on a switch?  IP for remote management  This is similar

69 F0/6

70  5.3.3.5  Configuring a Layer 3 Switch

71  What address(es) does a layer 2 switch read?  MAC addresses  What address(es) does a layer 3 switch read?  IP & MAC  You want to connect your Layer 3 switch to your ISP instead of using a regular router. What must you configure one of the ports as?  Routed port  Which command enables the routing function on a switch port?  No switchport

72  Complete the study guide handout  Take the quiz on netacad.com  Jeopardy review

73 In this chapter, you learned:  Ethernet is the most widely used LAN technology used today.  Ethernet standards define both the Layer 2 protocols and the Layer 1 technologies.  The Ethernet frame structure adds headers and trailers around the Layer 3 PDU to encapsulate the message being sent.  As an implementation of the IEEE 802.2/3 standards, the Ethernet frame provides MAC addressing and error checking.  Using switches in the local network has reduced the probability of frame collisions in half-duplex links.

74  The Layer 2 addressing provided by Ethernet supports unicast, multicast, and broadcast communications.  Ethernet uses the ARP to determine the MAC addresses of destinations and map them against known IP addresses.  Each node on a network has both a MAC address and an IP address.  The ARP protocol resolves IPv4 addresses to MAC addresses and maintains a table of mappings.  A Layer 2 switch builds a MAC address table that it uses to make forwarding decisions.

75  Layer 3 switches are also capable of performing Layer 3 routing functions, reducing the need for dedicated routers on a LAN.  Layer 3 switches have specialized switching hardware so they can typically route data as quickly as they can switch.

76 Chapter 5 Intro to Routing & Switching


Download ppt "Chapter 5 Intro to Routing & Switching.  Upon completion of this chapter, you should be able to:  Describe the operation of the Ethernet sublayers."

Similar presentations


Ads by Google