1. ABSTRACT In this system we have created the new generation ATM machine which can be operated with the SIM instead of ATM card. The camera presented near the ATM machine will capture the users image and compare it with the user image in the server using MATLAB. So by using this system need of ATM card is completely eliminated and we can operate the ATM machine by using our SIM itself. The concept of this project involves malfunction avoidance.

2. Alert Module Power supply Data Transfer Unit Voice annunciati on Module Block diagram

3. Introduction  ATMs are used to carry out a variety of personal and business financial transactions and/or banking functions.  ATMs are now found in many locations having a regular or high volume of consumer traffic.  The consumers have the ability to carryout their ATM financial transactions and/or banking functions at any time of the day and on any day of the week.

4. Data Transfer Unit AT89s51 Microcontroller:  Endurance: 1000 Write/Erase Cycles  4.0V to 5.5V Operating Range  Three 16-bit Timer/Counters  Watchdog Timer  Full Duplex UART Serial Channel

5. GSM  The GSM Modem comes with a serial interface through which the modem can be controlled using AT command interface.  Mobile scanning device scans SIM number and send information through GSM Modem  A GSM modem requires a SIM card from a wireless carrier in order to operate.

6. Voice annunciation & Alert module  The voice annunciation module guide the consumer step by step to use the ATM.  It is very useful for blind people & new users of ATM.  If the steps of the predefined process goes wrong, the alert module gives the alert.

7. Web Camera  Before password session, an image processing unit is proceeded by web camera.  In our project, normal web camera is used.  In the real time implementation an high accuracy camera is used, which compare the skull coordinates of the account user with the predefined user image.

8. Features of Micro controller 4K Bytes of In-System Programmable (ISP) Flash Memory 4.0V to 5.5V Operating Range Fully Static Operation: 0 Hz to 33 MHz 128 x 8-bit Internal RAM 32 Programmable I/O Lines Two 16-bit Timer/Counters Six Interrupt Sources Full Duplex UART Serial Channel Low-power Idle and Power-down Mode Watchdog Timer, Dual Data Pointer

9. Hardware development tools  GSM Modem  RS232 cable  Voice chip  Microcontroller (AT 8051)  Web camera

10. Software development tools  MATLAB  KEIL IDE  Visual basic 6.0  OrCAD DESIGN (for real time implementation)

11. Advantages  Intention recognition system  Bank transaction based on mobile SIM  Effective alert module  Process intimation module

12. Applications  Security applications  Data transferring applications  Image processing applications  Banking applications

13. LITERATURE REVIEW  M. Ejiri, T. Uno, M. Mese and S. Ikeda, “A Process for Detecting Defects in Complicated Patterns”  N. Miura, A. Nagasaka and T. Miyatake, “Automatic Feature Extraction from non-uniform Finger Vein Image and its Application to Person Identification,”  Keränen, H., Pohjanheimo, L., Ailisto, H. (2005) Tag Manager: a Mobile Phone Platform for Physical Selection Services in International conference on Pervasive Services  J. Chirillo and S. Blaul, “Implementing Biometric Security”