1. Announces the New EOS Pump Range EOS 15-C25 EOS 30-C25

2. Accelerator of Performance Efficiency, Optimization, & Simplicity
1. Introduction
Accelerator of Performance
Efficiency, Optimization, & Simplicity
True accelerator of performance for your Airmix® Xcite™ gun, the new paint pump Kremlin Rexson range brings together Efficiency, Optimization, & Simplicy.
The innovative design and component quality bring reliability and performance and allow for simple maintenance, easy cleaning, and safe color changes while using minimal solvents. The cost of owenrship is reduced at a minimum.
Introduction

3. 1. Introduction Introduction
Kremlin Rexson is offering (2) New Pumps now available in the EOS Pumpline:
EOS 15-C2 (Comparable to the 10-14)
EOS 30-C25 (Comparable to the 20-25)
Both pumps are equipped with a new air motor design that allows a smooth start-up under low pressure; therefore delivering perfectly controlled fluid output each time.
The EOS Pumps are:
Offered at a competitive price
Easy to Operate
Durable - Strong & reliable construction
Increases Production
Environmentally friendly
Ergonomically designed
Introduction

4. 2. Features & Benefits - Efficiency
Stainless Steel Hydraulic Section which can be used with a wide range of coatings including waterborne coatings.
Double stroke fluid section – Produces a more even fluid delivery than the old pump styles – &
Large Diameter Valves – capability to pump higher viscosity materials. Recommended for materials up to 5000 cps.
Closed design with protective carter between the air motor and fluid section – No risk of severe injuries to your fingers or hands. Lubricant is protected against pollution from the environment.
Efficiency

5. 2. Features & Benefits - Optimization
Compact which allows the pumps to fit in smaller working areas. Perfect for wall, stand, or cart mounting.
New Cart & tri-pod design offers stability for the pump. The cart makes this product truly mobile. The stand allows the product to be “plug-n-play”.
New filter & gravity hopper delivers optimized filtration for re-cycled materials; circulating for charged materials
New suction rods – 16mm recommended for frequent color changes and 25mm recommended for high viscosity materials up to 5000 cps. No cavitations with high viscosity products. New flexible hoses connected to the foot valve without an adapter.
Otimization

6. 2. Features & Benefits - Simplicity
Differential Air Motor delivers fast and responsive reversing at very low air pressures without stalling. Priming the pump is easy, safe, and clean with low fluid discharge pressures.
Fluid Section with mobile lower packing construction delivers better sealing and longer working life. It is also better adapted to heat sensitive products like UV or pre-catalyzed material.
Simple design has reduced the need for number of spare parts. Quicker and cheaper servicing producing a quicker ROI.
Air Motor/Hydraulic Section Coupling without tie rod makes disassembling and reassembling very quick. No more tie rods to be disassembled. It is possible to rotate the fluid section to adjust the fluid output on the application.
Simplicity

7. 2. Features & Benefits - Simplicity
New Air Control Panel allows precise air adjustments using high precision air regulators. The control panel comes equipment with (2) gauges, (2) air regulators and one stop valve on the air inlet. The atomizing air can be checked before spraying your applications.
New Spray gun support has been constructed on the control panel offering easy access to the spray gun.
Simplicity

8. 2. Features & Benefits – Fluid Delivery
10-14 Pump
PPR 10:1
Fluid delivery per Cycle
18cc / 0.59 oz
EOS 15-C25 Pump
PPR 15:1
Fluid delivery per Cycle
25cc / 0.82 oz
Features & Benefits
Range Evolution
20-15 Pump
PPR 20:1
Fluid delivery per Cycle
22cc / 0.73 oz
EOS 30-C25 Pump
PPR 30:1
Fluid delivery per Cycle
25cc / 0.82 oz

9. 3. Technical Specification
Pressure ratio
15:1
30:1
Surface Air Motor Piston
3.8” / cm2
6.5” / cm2
Fluid volume per cycle (cm3)
0.83 oz. / 25(2 x 12.5) 25 cm3
Number of cycles per liter of products
10.5 gal / L
Fluid Output at 30 cycles/mn
0.19 gal/mn / (l/mn)
Air consumption at 30 cycles/mn at 60 psi / 4 bar
2.8 m3/h
7.1 m3/h
Free flow 30 cycles/mn
1.5 l/mn
Maximum air inlet pressure
94 psi / (bar)
Maximum fluid pressure
1414 psi / (bar)
2828 psi / (bar)
Maximum Fluid Temperature
140 °F / °C
Sound level (dBA)
Sealing Packings – Upper sealing
Stainless steel cartridge with GT sealing
Sealing Packings – Lower
UHMW polyethylene seal
Weight (w/o support or rods)
16.7 lb / (kg)
Wetted Parts
Hard chrome stainless steel, treated stainless steel, stainless steel
Height
23” / (cm)
Width
6.2” / (cm)
Depth
6.7” / (cm)
Technical Specifications

10. 5 – Target Markets Target markets Wood Markets Furniture Joineries
Wood Office Furniture
Kitchen and Bathrooms
Exterior Furniture
Shop fitters
Wood Markets
Target markets