1. AP (Access Point) Client Operation Mode ： Bridge Mode: AP IP Address: 192.168.1.254 DHCP: Server Operation Mode ： Bridge Mode: Client IP Address: 192.168.1.253 DHCP: Disable PowerLink CPE PL-CPE-22N AP to Client Setup

2. AP setup 1. 2. 3.

3. AP Setup 4. 5. Select AP Mode 6. Create your AP name 7.

4. AP Setup Note: skip this page if you don’t need to set up encryption 8. 9. Select Encryption 10. Enter your password

5. AP Setup 11. 12. Default IP is 192.168.1.254 13. Default DHCP is Server 14.

6. Client Setup 1. 2. 3.

7. Client Setup 4. 5.Select Client Mode 6. Set a different name to AP 7.

8. Client Setup Note: Skip this page if there is no encryption setup on AP 8. 9. Select same encryption as AP 10. Same password as AP

9. Client Setup 11. 12. Set IP to 192.168.1.253 13. Disable DHCP 14.

10. Client Setup 15. 16. Refresh to find surrounding AP 17. Select the name of the AP appears under SSID 18. Click Connect once you have selected the AP you wish to connect,