Presentation is loading. Please wait.
Published byEmil Hart Modified over 7 years ago
» Know ˃Install battery ˃Insert media card ˃Lens mounting ˃Power controls ˃Focus modes ˃Record modes » Show ˃Install a battery, insert the media card, turn on camera ˃Select focus mode and record mode » Level ˃Knowledge
» Lithium-Ion Battery » Rechargable » Do NOT put anything but THIS specific battery in the cameras!
» Open compartment cover by sliding tab » Insert battery. It will only go in one way, look at shape of the compartment. » Close compartment cover. You will feel it click. » NEVER FORCE IT.
» Lots of different types of cards » SD most common » SD is what all the school cameras use
» Never touch the contacts (gold metal looking tabs) » Watch the “lock” switch on the card – it will prevent your camera or computer from reading the card
» Slide the memory card slot door towards back of camera » It will swing open » Slide the card, label facing you, until it clicks into place » NEVER FORCE IT
» Line up the white dots on the lens and the body » Insert the lens into the mount » Rotate the lens ¼ turn CCW until it clicks into place » Canon, is of course, DIFFERENT
» AFTER the battery, memory card, and lens are installed, you can turn on the camera » The power switch is on top of the camera, in front of the mode dial
» Turn the mode dial so that the little white tick mark points at the mode you want » Good starter – Program Auto
» Lens Focus Mode Switch to “A” for Auto » “M” is for manual focusing, where you use the focus ring and do it yourself
» Press the shutter release button halfway down to focus (& activate light meter) » Press it all the way down to take a picture
» Press playback button to see picture(s) you took » Use D-pad to navigate through your pictures » Use trash can to delete
© 2023 SlidePlayer.com Inc.
All rights reserved.