1. Light Sport Aircraft Certification by Consensus 30 th FAA Aviation Forecast Conference

3. Light Sport Aircraft - Defined Maximum gross weight-1,320 lbs, 1,430 lbs for seaplanes. Maximum stall speed-51 mph (45 knots) Maximum speed in level flight with maximum continuous power (Vh)-138 mph (120 knots) Two-place maximum (pilot and one passenger) Single, non-turbine engine, fixed propeller Fixed landing gear, except for an aircraft intended for operation on water or a glider

4. What Do These Things Look Like? Airplane (Land/Sea) Gyroplane Airship Balloon Weight-Shift-Control (Trike Land/Sea) Powered Parachute

5. www.sportpilot.com

6. Certification Categories Experimental Light-Sport –Existing two-place ultralight trainers –Future production kit-built aircraft Non-commercial/recreational use only Special Light-Sport –Factory ready – fully manufactured May be used for instruction and rental

7. Transition of Existing Ultralight Trainers Inspected by Designated Airworthiness Representative (DAR) Remedial action taken as necessary Airworthiness certificate issued by FAA –Experimental Light-Sport Category N-Number registration and placards –Must then be flown only by certificated pilots –Approximately 10,000 aircraft

8. Future Production Kit Aircraft Experimental Light-Sport Category Sold as kits to any level of completion –Meet consensus standards –Includes standards for assembly instructions Not believed to be the major growth area for the future LSA fleet at this time –Many kit manufacturers products to remain as experimental amateur-built

9. Fully Manufactured Aircraft Special Light-Sport Category Factory completed aircraft –Dealers can complete if part of QA process Meet all applicable consensus standards Can be used for rental or instruction Most industry interest shown in Special-LSA –100 to 200 fixed wing aircraft per month in 2005 –Estimated to rise to 400 per month by 2007 –Does not include trikes or powered parachutes

10. How do we Certify These Purely Recreational Aircraft? Part 103 – Ultralights Insufficient standardization to allow industry to grow and prosper beyond historic levels –No design and performance standard –No production standard –No quality assurance standard –No maintenance or inspection standard

11. How do we Certify These Purely Recreational Aircraft? Part 23 – Airworthiness Standards Part 21 – Certification and Production –Proven to be too expensive and cumbersome for very light, inexpensive recreational aircraft –Market is more like that of recreational vehicles, motorcycles, and boats, than traditional general aviation aircraft

12. We Needed to Strike a Balance Between No Standard at All and Full Blown Federal Regulation All Departments of the US government have been instructed to, whenever possible, delegate standard development to industry consensus standards setting organizations.

13. How Are the Standards Used for Aircraft Certification? No Type Certificate or Production Certificate is issued Manufacturer certifies to FAA that their product complies with applicable standards Manufacturer certifies that the quality assurance and continued airworthiness programs meet the standards and are in place

14. Many Approaches Contemplated EAA has long-established relationships with engineering and standardization organizations Due to need for full participation by industry, consumers, and government (not just engineers), several organizations were ruled out due to their internal procedures

15. ASTM Deemed to be Best Suited for Arriving at Consensus Through Broad Participation EAA had long experience with ASTM through participation in aviation fuel and lubricants committees –Development of EAA’s auto gas STC program and high octane unleaded fuel research Approached ASTM seeking support for Light Sport Aircraft standards in mid-2001

16. Who or What is ASTM? ASTM International is one of the largest voluntary standards development organizations in the world, a trusted source for technical standards for materials, products, systems, and services.

17. ASTM: What Do They Do All stakeholders involved Neutral forum Consensus-based procedures Private and public sector cooperation EXAMPLE Aircraft manufacturer Aircraft manufacturer Federal agencies Federal agencies Pilot associations Pilot associations Professional societies Professional societies Maintenance professionals Maintenance professionals Trade associations Trade associations Financial organizations Financial organizations Academia Academia Insurance industry Insurance industry

18. 130 Technical Committees Ten examples: A1 on Steel, Stainless Steel, and Related Alloys D2 on Petroleum Products and Lubricants E50 on Environmental Assessment F8 on Sports Equipment and Facilities F15 on Consumer Products F24 on Amusement Rides and Devices F25 on Ships and Marine Technology F37 Light Sport Aircraft F38 Unmanned Air Vehicle Systems F39 Normal and Utility Category Airplane Electrical Wiring Systems

19. Standards and Related Information -Why Develop Them? Aid in design, manufacturing, performance, operation and maintenance Advance safety, health, quality Increase public interest, product certainty, and information availability Transfer technology to the marketplace via standards, handbooks, manuals, and training Passports to the global market

20. ASTM Committees Impacting Aircraft Design and Manufacture Committee F37 Light Sport Aircraft –F37.10 Glider F37.20 Airplane F37.30 Power Parachute F37.40 Weight Shift F37.50 Gyroplane F37.60 Lighter than Air F37.70 Cross Cutting F37.70.02 LSA Audit Task Group F37.70.10 Hang Glider and Paraglider Tandem Operations Task GroupF37.10 F37.20 F37.30 F37.40 F37.50 F37.60 F37.70 F37.70.02 F37.70.10 Committee F38 Unmanned Aircraft –F38.01 Airworthiness F38.02 Flight Operations F38.03 Operator QualificationsF38.01 F38.02 F38.03 Committee F39 Airplane Electrical Wiring –F39.01 Design, Alteration, and Certification F39.02 Inspection, Maintenance, and RepairF39.01 F39.02

21. Standards Required by LSA Regulation Design and Performance Required Equipment Quality Assurance Production Acceptance Tests Aircraft Operating Instructions Maintenance and Inspection Procedures Continued Airworthiness Manufacturer’s Assembly Instructions –Experimental Light-Sport Kits Only

22. F37 Light Sport Aircraft Committee and subcommittees have been working for over two years – Chaired by EAA Q4 2004 – All standards completed for the design and manufacture of airplanes and powered parachutes –Excluding maintenance and repairman standards FAA has formally accepted the new standards –Published in Federal Register March 3, 2005

23. Other Completed Standards Airframe Emergency Parachutes Engine Design and Manufacture Gyroplane - design, operating, and airworthiness –Gyroplanes are not eligible for Special LSA airworthiness certificates under existing regulations Lighter Than Air – manufacture, quality, and airworthiness

24. Standards To Be Completed Before Special and Experimental Light-Sport Aircraft can be sold, several standards have yet to be completed and fully balloted. –Maintenance and Inspection Procedures –Identification and Recording of Major Repairs and Major Alterations –Complete in Q2 or Q3 2005 FAA policy regarding training and certification of repairmen requires additional work

25. For Your Reference: Airplane Standards Design, Performance, Required Equipment, Operating Instructions –ASTM F2245-04 Quality Assurance, Production Acceptance Testing –ASTM F2279-03 Continued Airworthiness –ASTM F2295-03

26. For Your Reference: Powered Parachute Standards Design and Performance –ASTM F2244-03 Required Equipment, Operating Instructions –ASTM F2243-03 Quality Assurance –ASTM F2240-03 Production Acceptance Testing –ASTM F2242-03 Continued Airworthiness –ASTM F2241-03

27. For Your Reference: Gyroplane Standards Design and Performance, Required Equipment, Operating Instructions –ASTM F2352-04 Continued Airworthiness –ASTM F2415-04

28. For Your Reference: Lighter Than Air Standards Quality Assurance and Production Acceptance Tests –ASTM F2353-04 Continued Airworthiness –ASTM F2354-04

29. For Your Reference: Optional Standards Airframe Emergency Parachutes –ASTM F2316-03 Engine Design & Manufacture –ASTM F2339-04

30. Where Can I Obtain Copies of the LSA Standards? ASTM International 100 Barr Harbor Drive P.O. Box C700 West Conshohocken, PA 19428-2959 (610) 832-9585 WWW.ASTM.ORG

31. Outcome FAA and industry have been favorably impressed –Ability of process to draw disparate and competing interests toward consensus –Quality of ASTM support for the process –Quality of the standards themselves Standards are living documents –Must be reviewed at least every two years –Updates likely more frequent – contrasts dramatically with regulatory solutions

32. LSA – Paving the Way for Others Process has already been expanded to other aeronautical projects where consensus documents can be more complete and timely than regulation F38 – Unmanned Aircraft F39 – Aircraft Electrical Wiring –Large number stakeholders –Disparate industry and government segments –Competing interests A model for the future!!

33. Light Sport Aircraft Certification by Consensus A Model for the Future