Presentation is loading. Please wait.

Presentation is loading. Please wait.

Paul drumm; 3rd December 2004; AFC MM 1 Why? Goal: Ultimate (CCLRC defined) Safety & Design Review –How do we get there? We need a Process –What is needed?

Published by Modified over 8 years ago

Similar presentations

Presentation on theme: "Paul drumm; 3rd December 2004; AFC MM 1 Why? Goal: Ultimate (CCLRC defined) Safety & Design Review –How do we get there? We need a Process –What is needed?"— Presentation transcript:

1 paul drumm; 3rd December 2004; AFC MM 1 Why? Goal: Ultimate (CCLRC defined) Safety & Design Review –How do we get there? We need a Process –What is needed? Full Safety & Design assessment –How do we ensure success? Assessment within MICE but outside of the working groups Propose Design & Safety Working Group –Based on group involved in AFCSWG¹ –Expanded to cover all MICE – in a timely manner ¹ but with fewer letters – easier to repeat!

2 paul drumm; 3rd December 2004; AFC MM 2 AFCSWG – as was Original Concept for Absorber and Hydrogen System Process* heavy for most of MICE Ultimate goal stands *

3 paul drumm; 3rd December 2004; AFC MM 3 Morph to D&SWG… Role of existing working groups unchanged Character and role of the “review panel” is different: –Internal “audit” process unless D&SWG advises that an independent review is needed (matter of risk & competence within MICE) –D&SWG guides documentation preparation through a series of audits –D&SWG to assess the documentation Not the same as a review (less overhead) –Informs TB & EB on readiness for final review

4 paul drumm; 3rd December 2004; AFC MM 4 From Document... to Presentation by Video? Task Leader Task Members Process Wing Design & Safety Group Agree Procedure Develop Concepts & Design Prepare documentation Review fit for purpose Documents ok Pre-manufacture Acceptance Document Review Review FINAL Document Audit Detail Design & Safety… Manufacture & Install Operate Rehearsal RAL Review RAL Audit & Advise Support Audit & Advise You are here! Agree when ready Invitees? Task Leader Task Members Task Leader Task Members Advice?

5 paul drumm; 3rd December 2004; AFC MM 5 Phase 1 Time Scales Beam Line needs to be in place end of 2006 –Complete beam line review by end 2005 –Radiation shielding is a more delicate matter –Target is a potential risk to ISIS operations –Beam Line is (probably low risk) ISIS/EID engineering staff Following established & proven practices Spectrometer & Tracker –Low risk R&D activities –Medium - Potentially High – design to achieve Low Risk

Download ppt "Paul drumm; 3rd December 2004; AFC MM 1 Why? Goal: Ultimate (CCLRC defined) Safety & Design Review –How do we get there? We need a Process –What is needed?"

Similar presentations

MICE: Hall Infrastructure Chris Nelson CEng CM15 8 th June 2006.

MICE: Hall Infrastructure Chris Nelson CEng CM15 8 th June 2006.
Status of the AFC at RAL Tom Bradshaw John Cobb Wing Lau Matt Hills Elwyn Baynham Mike Courthold Victoria Bayliss MICE Project Board 28 th June 2011.

Status of the AFC at RAL Tom Bradshaw John Cobb Wing Lau Matt Hills Elwyn Baynham Mike Courthold Victoria Bayliss MICE Project Board 28 th June 2011.
MICE Hall – South Mezzanine Jason Tarrant - STFC l Contents »Device checks with current South Mezzanine »South Mezzanine change summary »Conclusion.

MICE Hall – South Mezzanine Jason Tarrant - STFC l Contents »Device checks with current South Mezzanine »South Mezzanine change summary »Conclusion.
AFC engineering group meeting on the 26 th of Jan 2004 MICE Absorber Focus Coil work schedule for the next 6 months By Wing Lau, Oxford.

AFC engineering group meeting on the 26 th of Jan 2004 MICE Absorber Focus Coil work schedule for the next 6 months By Wing Lau, Oxford.
On MICE Coordinate System Yury Ivanyushenkov RAL.

On MICE Coordinate System Yury Ivanyushenkov RAL.
1 MICE PM Report General Update –Phase I civil engineering –R5.2 in June –Phase II design work –Phase II hardware –A few questions –Schedule, milestones.

1 MICE PM Report General Update –Phase I civil engineering –R5.2 in June –Phase II design work –Phase II hardware –A few questions –Schedule, milestones.
1 paul drumm; 19-09-2005; FAC-PR MICE Project Status Funding Agency Committee 19 th September 2005.

1 paul drumm; ; FAC-PR MICE Project Status Funding Agency Committee 19 th September 2005.
March 2003 Paul Drumm MICE Collaboration Meeting, CERN 1 Beam Line & Installation Plans Paul Drumm CLRC Rutherford Appleton Laboratory.

March 2003 Paul Drumm MICE Collaboration Meeting, CERN 1 Beam Line & Installation Plans Paul Drumm CLRC Rutherford Appleton Laboratory.
MICE Safety Review Process and Schedule Elwyn Baynham Tom Bradshaw Iouri Ivaniouchenkov Columbia Meeting June 2003.

MICE Safety Review Process and Schedule Elwyn Baynham Tom Bradshaw Iouri Ivaniouchenkov Columbia Meeting June 2003.
Paul drumm; 1 st December 2004; PM&TB Report 1 Project Management & Technical Board Reports.

Paul drumm; 1 st December 2004; PM&TB Report 1 Project Management & Technical Board Reports.
Project Report Paul Drumm CM15, FNAL June 2006. MICE Schedule Overview First beam September/October 2007 –Shutdown from January 2007 –Eight months for.

Project Report Paul Drumm CM15, FNAL June MICE Schedule Overview First beam September/October 2007 –Shutdown from January 2007 –Eight months for.
MICE FAC Alain Blondel 7 October 2007 1   MICE The International Muon Ionization Cooling Experiment MICE CM19.

MICE FAC Alain Blondel 7 October   MICE The International Muon Ionization Cooling Experiment MICE CM19.
paul drumm; 3rd December 2004; AFC MM 1 Cost & Schedule Review I Terms of reference: –To review the Cost and schedule of the MICE Muon beam –To review.

paul drumm; 3rd December 2004; AFC MM 1 Cost & Schedule Review I Terms of reference: –To review the Cost and schedule of the MICE Muon beam –To review.
1 RAL Integration Issues MICE Collaboration Meeting, Osaka, August 1-3, 2004 Elwyn Baynham, Paul Drumm, Yury Ivanyushenkov, Tony Jones RAL.

1 RAL Integration Issues MICE Collaboration Meeting, Osaka, August 1-3, 2004 Elwyn Baynham, Paul Drumm, Yury Ivanyushenkov, Tony Jones RAL.
Gateway process Gateway Process: ‘owned’ by UK Office of Science and Technology Essentially the mechanism by which UK involvement in large projects gets.

Gateway process Gateway Process: ‘owned’ by UK Office of Science and Technology Essentially the mechanism by which UK involvement in large projects gets.
1 MICE Radiation Shutter Description Present status Plans, schedule and remaining work MICE CM26, 24-27th March, 2010.

1 MICE Radiation Shutter Description Present status Plans, schedule and remaining work MICE CM26, 24-27th March, 2010.
MICE Project Report Paul Drumm ~ Sunday August 1 st 2004.

MICE Project Report Paul Drumm ~ Sunday August 1 st 2004.
1 MICE PM Report Installations to date Future installation work Preparations for Phase Two Target status MICE Video Conference, 22nd May, 2008.

1 MICE PM Report Installations to date Future installation work Preparations for Phase Two Target status MICE Video Conference, 22nd May, 2008.
1 MICE Project Report, paul drumm, 9 march 2005 CM Highlights & Tasks… –Tracker base line – scintillating fibres – performance validated –TOF performance.

1 MICE Project Report, paul drumm, 9 march 2005 CM Highlights & Tasks… –Tracker base line – scintillating fibres – performance validated –TOF performance.
1 Status of infrastructure MICE Video Conference, August 17, 2005 Yury Ivanyushenkov Applied Science Division, Engineering and Instrumentation Department.

1 Status of infrastructure MICE Video Conference, August 17, 2005 Yury Ivanyushenkov Applied Science Division, Engineering and Instrumentation Department.

Similar presentations

Ads by Google