1. FieldServer Technologies
The gateway for device and system interoperability
Networks
Devices
Company Introduction

2. Worldwide Operation Division of Sierra Monitor Corporation
Headquartered in California’s Silicon Valley
Offices in major cities in the U.S.
Factory trained representatives throughout the U.S., Europe, Latin America and Asia/Pacific
Company Introduction

3. Sierra Monitor Corporation
Micro-cap Public Company – SRMC-OB
Headquarters & Manufacturing- Milpitas CA
Design Center – Johannesburg South Africa
Sales Locations – USA/Canada, Europe, Latin America, China, Middle East, Asia
ISO 9001 and TUV Certified Panel Shop

4. Corporate Culture Quality Products ISO 9001:2008 Registered
TUV to UL Standards approval
CE Mark
FM Approval
BACnet, LonMark, DNP3, OPC, Modbus Certified
Quality award from Defense Department

5. Communication Challenges
Devices and systems in a building must communicate with each other
Several different common “open” protocols in the industry
Choose between cheap gateways with minimal “on-line” support or an expensive fully configurable gateway
Company Introduction

6. FieldServer Solution
FieldServer is the premium major gateway supplier in the building automation industry
Experienced in driver development and protocol translation
Robust, reliable hardware combined with proven software results in adaptability for any interface challenge
Ease of start-up plus proven after-sale factory support
Company Introduction

7. FieldServer Applications
Interoperability Solutions
Chiller and Air Handling
Boiler Controls
Lighting
Data Center
Generator/UPS
Battery Room
Security
Fire Panels
Life Safety
Process Controls
Company Introduction

8. QuickServer
A high-performance, cost-effective, fully- configurable gateway
Based upon proven FieldServer platform
Backed by trusted FieldServer technical support
Utilizes the reliable, tested FieldServer protocol drivers
A product you can trust from FieldServer

9. QuickServer Specifications
Field Connections
FS-QS-1XX0 – 10/100 Ethernet, RS-485, plus RS-485, RS-232 or RS FS-QS-1XX1 also has LonWorks
Power – 9-30 VDC or VAC
Size: 4.5 x 3.2 x 1.6 in. (11.5x8.3x4.1 cm)
Points: Basic 250 points, Enhanced 500 points
Approvals: UL/ULC 916, CE Mark, BTL (FS-QS-1010), LonMark, OPC, DNP3, Modbus, ISO 9001:2008
Company Introduction

10. QuickServer Basic Models
BACnet/IP
BACnet MS/TP
Modbus TCP
Modbus RTU
JCI Metasys
LonWorks
SNMP
FS-QS
FS-QS
FS-QS
FS-QS
FS-QS
FS-QS
FS-QS
FS-QS
FS-QS
FS-QS
FS-QS
FS-QS
FS-QS
FS-QS
FS-QS
FS-QS
FS-QS
FS-QS
FS-QS
FS-QS
FS-QS
FS-QS
FS-QS
Company Introduction

11. FS-B20 Series Interoperability Solution
Single device to device interface
Compact Size
Single Serial Port
Ethernet gateway
LonWorks Option
Port expander
Internal buffering
Company Introduction

12. FS-B20 Interface Power Connection Status LEDs
RS-232 or RS-485 Serial Port
10BaseT Ethernet
Fieldbus Port
(LonWorks)
Power/Link LEDs
Company Introduction

13. FS-B35 Series Interoperability Solution
Single device to device interface
Compact Size
Four Serial Port
Two Ethernet
LonWorks
ControlNet & Profibus
Internal buffering
Company Introduction

14. FS-B30 Interface Power Connection RS-485 Serial Ports
Ethernet Ports
RS-485 Serial Ports
LonWorks
Connection
Company Introduction

15. FS-B40 Series Interoperability Solution
Where multiple serial interfaces are required
Multiple Serial Ports
Protocol translator
Ethernet gateway
Port expander
Internal buffering
Hot Standby - redundancy
Company Introduction

16. FS-B40 Interface Internal ISA bus for off-the-shelf communication
adapter cards
Two opto-isolated
RS-485 ports
Eight
RS-232 ports
Two 10BaseT
Ethernet ports

17. Mounting Standard FS-X40 designed to sit on a shelf or platform
Optional Mounting brackets
For wall mounting
For rack mounting.

18. Power Requirements
-5V is internally generated from the -12V supply, so we do not need this. It is also not necessary to connect this when using external supply.
110/220 Power Supply Connection
Provides +5V, +12V, & -12V
Auxiliary Power Connection
Voltage Requirements -12V 500ma, +12V 500ma, +5V 1.5 Amps, -5V 500ma

19. SlotServer ControlLogix Communications Interface
Direct interface to Allen Bradley ControlLogix
LonWorks TP/FT-10 Interface
Standard AB 1756 format plugs directly into ControlLogix rack
RS-485 and Ethernet interface
LonMark Certified
Available through ProSoft Technology sales channel
Company Introduction

20. ProtoCessor Protocol Coprocessor Module for OEMs
Standardized common interface
Access to full FieldServer driver library
Serial, Ethernet and LonWorks
Rapid time to market
Protocol flexibility
Company Introduction

21. How it Works User configurable Poll times Protocols Port usage
Data caching
Modem support
BACnet
Bridge
Data Array
Scan Blocks
Notifier
Modbus
LonWorks
Communications Bridge

22. FieldServer Architecture
Building
Management
System
Plant Controls
(BACnet IP, Modbus TCP,
or other Ethernet protocols)
BACnet MS/TP
LonWorks
Modbus
Fire Alarm Panels
Metasys
Proprietary Protocol

23. BAS Devices/Drivers Trane Crestron Data Aire Liebert Cisco EnergyWise
Wonderware
Hochiki
Honeywell
Alerton
Johnson Controls
Delta Controls
Cisco EnergyWise
Cleaver Brooks
Simplex
Square D
TekAir
Canatal
Echelon
Allen Bradley
Grinnell
Modicon
Opto
Caterpillar
RussElectric
Fike
Circon
Silent Knight
Notifier
AMX
Intellution
York
EST
Andover
Mitsubishi
Siemens
Point Six Wireless
Omron

24. BAS Devices/Drivers Comprehensive BAS driver library for:
Distributed Control Systems
AC Controls
Chillers
Boiler controls
Fume Hood Controllers
Energy Management Systems
Fire Alarm Panels
Variable Frequency Drives (VFD)
Building Automation Systems

25. Current Drivers Building Automation Control Drivers BACnet Canatal
Caterpillar
Cleaver Brooks Hawk
Data Aire
Carrier
McQuay
Lutron
LonWorks
Metasys N2
Yorktalk
EST3 & EST Quickstart
Notifier – Onyx, AFP, INA
FCI 7100/7200
Fike Cheetah
Hochiki
Secutron
SimplexGrinnell 4100
Siemens MXL & XLS
Vesda
Fire Alarm Panels

26. Current Drivers Company Specific Drivers SMC 2460
Honeywell Analytics CM4
SGS Ethernet
Weightronics
Telosense TGM/ACM
Gardner Denver
RussElectric
Canatel
ATMI
ILCO
Pneumatic Products
United Power
Cyberex
Spectronics
Point Six Wireless

27. Current Drivers Process Control Drivers Allen Bradley DF1 Modbus Plus
Allen Bradley DH+
Allen Bradley TCP
ControlNet
DNP 3.0
GE Mark IV
Opto 22
Modbus ASCII
Modbus RTU
Modbus TCP
Modbus Plus
GE-SRTP
OPC
Profibus DP and MS
SNMP
Telnet
TL1
DDE
GE-SNP

28. FieldServer Options Custom Configuration Memory upgrade – Mounting
User supplies point information, FieldServer will configure the system with mapping of all desired points
Memory upgrade –
QuickServer Enhanced is for 500 points
Standard FS-B20 is for 500 points – upgrade to 1000 points
Standard FS-B30 is 1000 points – upgrades to 10,000 points
Standard FS-B40 is 1000 points – upgrades to 10,000 points
Mounting
QuickServer – Flush mount or DIN rail mounting option
FS-B20 – DIN rail mounting option
FS-B30 - DIN rail mounting option
FS-B40 – 19 inchRack mount or wall mounting options
Factory Training
Extended Warranty

29. Custom Configuration
FST provides a custom configuration service in which we will map the data from one protocol to the other protocol and download and test it on the FieldServer prior to shipment
Information that needs to be provided to FieldServer
Network diagram/topology indicating Server and Client side network connections, media type, protocol identification, master/slave relationships and routing devices
Node descriptions and variable descriptions

30. FST Support
Inter-communications is the business of FieldServer Technologies, our only business
We can offer standardized gateways
With factory configurations or factory trained personnel, installation is made easy
The future is unlimited in the capability to interface to other building control and automation devices and networks
Proven factory support before, during and after the sale

31. FieldServer Technologies
Approvals
Company Introduction

32. BTL Certification
BACnet Testing Laboratories – part of BACnet International
Highest level of BACnet conformance tests.
FieldServers are the only comprehensive gateways awarded BTL Mark
Products BTL Marked:
- QuickServer FS-QS-1010
Company Introduction

33. LonMark Certification
LonMark International utilizes a LonMark Certification Tool (LCT) to test product for LonMark compliance
Until recently no standards for comprehensive gateway tests
FieldServer passed the tests recently, now working on listing arrangements.
Products LonMark tested:
- QuickServer FS-QS-1011
- FS-B20, FS-B35, FS-B40
Company Introduction

34. OPC Certification
OPC Foundation provides a self-test tool to certify compliance to OPC standards
FieldServer passed the tests recently, and now has more gateways OPC Certified than any other manufacturers.
Products OPC Certified:
- QuickServer FS-QS-1010 and FS-QS-1011
- FS-B20, FS-B25, FS-B35, FS-B40
- OPC Server, FS-B-OPC
Company Introduction

35. DNP3 Certification DNP User Group manages all DNP3 protocol standards.
FieldServer passed the tests recently, and has more gateways DNP3 Certified than any others.
Two new drivers (both meet DNP3 Level 2)
FS DNP3 Serial
FS DNP3 Ethernet
Products DNP3 Certified:
- QuickServer FS-QS-1010 and FS-QS-1011
- FS-B20, FS-B25, FS-B35, FS-B40
Company Introduction

36. FST Associations
Company Introduction

37. Approvals CE Marked UL 1950 – FS-X40 UL 916 Standards – QuickServer
Tested to
Comply with
FCC part 15
Company Introduction

38. FieldServer Technologies’ Quality System is ISO 9001:2008 Registered
Quality Policy
The Quality of FieldServer Technologies Products and Services will Meet or Exceed our Customer’s Requirements
FieldServer Technologies’ Quality System is ISO 9001:2008 Registered
Company Introduction