Download presentation
Published byLuke Murphy Modified over 9 years ago
1
Handy Store Fixtures Gondola Dolly Assembly Instructions
2
Materials Parts List: Gondola Dolly Frame Gondola Uprights End Shoe
Center Shoe Back Panel Stop Cap Spacers Front Toe Back Panel Top Cap Base Shelf Levelers Castors with Nuts & Bolts
3
Assembly Instructions
A) Remove Levelers (#11) that are inserted into End Shoe (#3) and Center Shoes (#4).
4
Assembly Instructions
B) Screw 4 Castors (#12) into Gondola Dolly Frame (#1).
5
Assembly Instructions
C) Attach Shoes to Gondola Dolly Frame (#1). Bolt down to the Frame, bolts go down thru End Shoe into Frame (#1). Use nut to tighten. (See Figure 1)
6
Assembly Instructions
D) Insert Back Panel Stop Cap (#5).
7
Assembly Instructions
E) Insert Spacers (#6).
8
Assembly Instructions
F) From above, slide Front Toes (#7) into End & Center Shoe (#3) & (#4).
9
Assembly Instructions
G) Slide Back Panel (#8) from top into one Upright (#2), then bend and slide into the other Upright (#2). *NOTE: If ¼” Back Panel is more than one piece, place Plastic Divider Bar (not shown) between Back Panels (#8).
10
Assembly Instructions
H) Screw Top Cap (#9) into Uprights (#2). (Screws shipped in Uprights.)
11
Assembly Instructions
I) Hook in Base Shelf (#10) properly.
12
Assembly Instructions
J) Shelves will hook into Uprights (#2) as shown.
Similar presentations
© 2025 SlidePlayer.com Inc.
All rights reserved.