1. 1 Conversion Solutions Easy, inexpensive solutions for converting analog to digital and upgrading Wiegand to WSE

2. 2 Introduction Conversion Solutions advantage Conversion Solutions products Conversion Solutions configurations Conclusion

3. 3 What is Conversion Solutions? Easily convert Schlage Electronics and Westinghouse analog systems to advanced digital technology Upgrade from Wiegand to WSE digital Maintain current investment in access control technology Easy, inexpensive, fast conversion Get the benefits of digital technology Advantage

4. 4 The advantages of WSE digital 1 of 2 More convenient access  Longer read ranges  Faster read times More secure and flexible  Multiple technology support More convenient card options  Multiple-technology  Badge  Key Fobs  Inventory control tags Less expensive cards Advantage

5. 5 The advantages of WSE digital 2 of 2 Faster, more dependable control  32-bit technology Easier, more expansive installation and expansion  4,000 foot wire runs between controller and reader  Daisy chain components Less expensive  30% plus cheaper Advantage

6. 6 Choice of solutions for specific applications NexLine coax adapter  which allows the transfer of both power and data over coax NexLine Plus  is an MSM replacement that converts four MSM points to 4-state RS-485 NexStar S-Net multiplexer  converts home-run wiring to S-Net protocol Wiegand Interface Unit w/ DR 4205W  Upgrade Wiegand to WSE  Maintain Wiegand physical interface Products

7. 7 NexLine Coax Adapter Converts coaxial wire runs to twisted pair Use existing coax in digital network Transfers power and data over coax Saves time and money Simple installation, install on both ends of coaxial run Combine multiple S-Net runs with NexStar Products

8. 8 NexLine Plus coax adapter/MSM replacement Uses existing coaxial cable and monitor point wire Replaces MSM removed during conversion process Monitors point signals between four monitor inputs and a NexSentry Controller Supports the already installed monitor point wires Reliable transfer of power and digital data over coax Simple installation Products

9. 9 NexStar S-Net multiplexer Link between access control unit and multiple S-Net runs Use existing coaxial cable to connect digital readers and other S-Net devices Upgrade Wiegand system to WSE digital  Uses existing wiring to multiplex into home run wiring scheme Allows home run wiring to connect between S-Net devices and a controller Repeater function allows 4,000 ft. plus wire run Products

10. 10 NexSentry WIU Wiegand Interface Unit w/ DR 4205W Wiegand Proximity Reader Use existing wiring and physical interface protocol in upgrade to WSE digital Supports 26- and 34-bit 5- wire Wiegand protocol Interfaces between one controller and four DR 4205s DR4205W DigiReader, WSE proximity with up to six inch read range Easy installation Products

11. 11 Configuration Easiest analog to digital conversion

12. 12 808S to NexSentry 4100 Configuration

13. 13 808S to NexSentry 4100, keeping alarms

14. 14 Upgrading Wiegand to WSE Wiegand Configuration

15. 15 Upgrading Wiegand to WSE S-Net Configuration

16. 16 Conclusion Easiest analog to digital conversion Maintain current investment in access control system  Use existing coax  Use existing components Gain benefits of WSE digital Easy installation Inexpensive

17. The future of access control