1. Job Element Sheet Process: Cheesecake Bake – Dropper Process Author: Andreana Crance, RIT MSD Date/Revision: 2/5/10, Rev 0 1. Obtain dropper2. Set up dropper #1 as shown in the picture below Air hookup Dropper pump 1

2. Job Element Sheet Process: Cheesecake Bake – Dropper Process Author: Andreana Crance, RIT MSD Date/Revision: 2/5/10, Rev 0 3. Get crumbed pans and trays4. Wheel full mixing bowl to dropper suction and set up dropper 5. Wheel empty rack to dropper area 2

3. Job Element Sheet Process: Cheesecake Bake – Dropper Process Author: Andreana Crance, RIT MSD Date/Revision: 2/5/10, Rev 0 6a. Drop batter into yellow buckets XX yellow buckets 7a. Wheel full yellow buckets to marble area 8a. Drop batter into pans Use 1 dropping per pan (fills pan halfway) If making Marble Cheesecakes: Switch lever 3

4. Job Element Sheet Process: Cheesecake Bake – Dropper Process Author: Andreana Crance, RIT MSD Date/Revision: 2/5/10, Rev 0 6b. Weigh one pan (without batter) Tear weight on scale 7b. Drop batter into pans. Reweigh pan. Ensure weight is correct per the recipe (1.18 +/- 0.02lb) 8b. If not: recalibrate and weigh If making One flavor/Plain Cheesecakes: 4

5. Job Element Sheet Process: Cheesecake Bake – Dropper Process Author: Andreana Crance, RIT MSD Date/Revision: 2/5/10, Rev 0 9. Fill rack from top to bottom (both sides)10. Wheel full rack to tunnel oven load queue 5

6. Job Element Sheet Process: Cheesecake Bake – Dropper Process Author: Andreana Crance, RIT MSD Date/Revision: 2/5/10, Rev 0 11. Change mixing bowls when necessary Put yellow bucket under suction to catch excess batter 12. Wheel empty mix bowl to mixer to be scraped by mixing employee. 6