1. MAIN MENU X WWW Click to start New Queensland Licensing Pathway
QUIT X
New Queensland Licensing Pathway
Introduction
SECTION 1 – Conduct routine checks
SECTION 2 – Plan work
Links have been disabled. Use your Enter button or mouse click to move to next screen.
SECTION 3 – Check controls & equipment
SECTION 4 – Shift load
SECTION 5 – Shut down equipment
CONTACT
EASY
GUIDES
WWW
EASY GUIDES
ONLINE
Hand & whistle signals
Click to start

2. A minimum 16mm diameter rope is used for tag lines
16mm diameter of dry and non-conductive material is the minimum size tag line to be used for controlling loads.

3. Hazards to incorporate into a work plan
The following hazards should be considered for inclusion into a work plan.
overhead services
surrounding structures
other equipment
dangerous materials
facilities
obstructions

4. Stopping the lower hook block from
striking the hoist drum or structure
A limit switch prevents the lower hook block from striking the hoist drum or structure.

5. The SWL should be printed on the bridge of the crane